Digital Projection Highlite 14000hd Users Manual

							E-81
8. Appendix
2 Specifications
Model Number HIGHlite 14000HD
Panel
*1DMD® 1.25”3
Output Resolution 20481080 native resolution
Lamp 2.0kW Bulb Type Short Arc Xenon
Built in: Overheat Protection
Lamp Over-Usage Protection
Light Output 13,400 Lumens
Full Light Output at 200 - 240V
Brightness Uniformity >80% corner to center
Contrast Ratio 1600 : 1 Full On / Off
Lens Movement Motorized Horizontal and Vertical Lens Shift
Motorized Zoom and Focus
Built in Lens Shutter
Lens Options
*2L2K-12ZHB 104-700 1.25 – 1.45 : 1 (Zoom lens)
L2K-14ZHB 104-701 1.45 – 1.8 : 1 (Zoom lens)
L2K-18ZHB 104-702 1.8 – 2.4 : 1 (Zoom lens)
L2K-22ZHB 104-703 2.2 – 3.0 : 1 (Zoom lens)
L2K-30ZHB 104-704 3.0 – 4.3 : 1 (Zoom lens)
L2K-10F 103-350 1.0 : 1 (Fixed lens)
Image Size 80 - 500” diagonal at 4:3
Installation Orientation: Desktop / Front, Desktop / Rear, Ceiling / Front, Ceiling / Rear
Stacking: Up to 3 projectors can be gravity stacked
Scan Rate Horizontal: 15 – 107kHz (RGB: 31kHz or over)
Vertical: 24 – 120Hz (Synchronous Input / Output mode : 24 – 60Hz)
Input Signal
  MM-VIDEOComposite Video 75ohms 1.0Vp-p (with Sync)
    (Built-in)S-Video Y : 75ohms 1.0Vp-p (with Sync)
C : 75ohms 286 – 300mVp-p
Component Video Y : 75ohms 1.0Vp-p (with Sync)
Cr,Cb : 75ohms +/-0.35Vp-p
(Standard Definition (15kHz) only)  MM-RGBR,G,B,H,V R,G,B : 75chms 0.7Vp-p positive polarity
    (Built-in)Y : 75ohms 1.0Vp-p positive polarity (with Sync)
Cr,Cb : 75ohms +/-0.35Vp-p positive polarity
(Component accepts HDTV and >31kHz interlaced and progressive
   inc 1080i/60, 1080i50, 24sF, 25p, 24p 23.98p/sF, 720p/60 but not 60p,
  RGsB, RGBS, RGBHV accepts HD progressive and progressive computer)
H/V Sync : 1k ohms / 75ohms (Selectable)
0.7 – 4.0Vp-p / TTL positive / negative polarity
Duty N/A
Composite Sync : 1kohms / 75ohms (Selectable)
0.7 - 4.0Vp-p / TTL Positive / negative polarity
Duty N/A
Sync on Green :
75ohms 1.0Vp-p (including sync signal component of 0.3Vp-p)
  MM-DVIDigital RGB Single Link : Pixel Clock Frequency 165MHz Max
    (Optional Board)Dual Link : Pixel Clock Frequency 202.5MHz Max
  MM-SDISDI SDTV : SMPTE 259M Level-C
    (Optional Board)HDTV : SMPTE 292M (include 24sF,24p)
(includes 1080i/60, 1080i50, 24sF, 25p, 24p 23.98p/sF, 720p/60 but not 60p)
Input / Output Terminal
  Input Slot 4 slots (One board each for the VIDEO board and analog RGB input board are standard equipment; 
						

							E-82
8. Appendix
2 slots are for expansion.)
  MM-VIDEOVideo Input BNC1 (Composite Video)
    (Built in)Input BNC2 (S-Video)
Input BNC3 (DVD Component)
  MM-RGBAnalog RGB Input BNC5 (shared with the component input connectors)
    (Built in)Audio Input RCA (L/MONO,R)1 (No Function)
  MM-DVIDigital RGB Input DVI-D1
    (Optional Board)Audio Input Stereo Mini Jack1 (No Function)
  MM-SDISDI Input BNC2
    (Optional Board)SDI Output BNC1
USB Port A Type1
LAN Port RJ-451
Remote Control In Stereo Mini Jack1, XLR Connector1
Out Stereo Mini Jack1
PC Control In D-Sub 9pin1
Out D-Sub 9pin
*31
PC CardTypeII1
Ex. Control Mini D-Sub15pin1
Power Requirement 200 - 240VAC, 50 / 60Hz
Power Consumption 3.0KW
Input Current 15A
Dimensions HL 14000HD : 27.2” (W)40.1” (D)20.4” (H)
690mm (W)1018mm (D)547mm (H)
Net Weight HL 14000HD : 194.7lbs (88.3kg) (without lens)
Environment Operational Temperature:  50° - 95°F (10° - 35°C)
Humidity: 20 – 80% non-condensing
Storage Temperature:  14° - 122°F (-10° - 50°C)
Humidity: 20 – 80% non-condensing
Regulations USA UL60950 FCC Class A
Canada CSA60950 ICES-003 Class A
Europe EN60950 EN55022 Class A
EN55024
EN61000-3-2
EN61000-3-3
Japan J60950 VCCI Class A
Asia IEC60950 CISPR.22 Class A
*1 : Permissible deviation for RGB convergence (Pixel deviation) is 1/2 pixel or less at center; 1 pixel or less around the perimeter
(when projection upward angle is 0°).
*2 : When using the zoom lens, it must be keep that the projector is positioned at an angle of from -15 to +15 degrees from the
horizontal.
*3 : These connectors are for future extension.
Specifications are subject to change without notice.
Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. 
						

							E-83
Technische Daten
Modellnummern
Bedienfeld*
1
Ausgangsauflösung
Lampe
Lichtausgang
Helligkeitsgleichmäßigkeit
Kontrastverhältnis
Linsenverschiebung
Linsen-Optionen*
2
Bildformat
Installation
Abtastrate
Eingangssignal
MM-VIDEO
(integriert)
MM-RGB
(integriert)
MM-DVI
(Zusatzplatine)HIGHlite 14000HD
DMD
® 1,25” x 3
2048 x 1080 natürliche Auflösung
2,0 kW Blasen-Kurzbogen-Xenon
Integriert: Überhitzungsschutz
Lampenverwendungsschutz bei überschrittenen Betriebsstunden
13.400 ANSI Lumen
Voller Lichtausgang bei 200 - 240V
> 80% Ecke zu Mitte
1600 : 1 V oll Ein/Aus
Mit Motor angetriebener horizontaler und vertikaler Linsenversatz
Mit Motor angetriebener Zoom und Fokus
Im Objektivverschluß integriert
L2K-12ZHB 104-700 1.25 – 1.45 : 1 (Zoom Linse)
L2K-14ZHB 104-701 1.45 – 1.8 : 1 (Zoom Linse)
L2K-18ZHB 104-702 1.8 – 2.4 : 1 (Zoom Linse)
L2K-22ZHB 104-703 2.2 – 3.0 : 1 (Zoom Linse)
L2K-30ZHB 104-704 3.0 – 4.3 : 1 (Zoom Linse)
L2K-10F 103-350 1.0 : 1 (Feste Linse)
80” (2,03 m) – 500” (12,7 m) diagonal bei 4 : 3
Ausrichtung: Boden/vorne, Boden/hinten, Decke/vorne, Decke/hinten
Stapeln: bis zu 3 Projektoren können aufeinander gestapelt werden
Horizontal: 15 – 107 kHz (RGB: 31 kHz oder mehr)
Vertikal: 24 - 120 Hz (bei synchronem Input / Output: 24 - 60 Hz)
Composite-Video 75 Ohm 1,0 Vp-p (mit Synch.)
S-Video Y 75 Ohm 1,0 Vp-p (mit Synch.)
C 75 Ohm 286-300 mVp-p
Komponentenvideo Y 75 Ohm 1,0 Vp-p (mit Synch.)
Cr, Cb 75 Ohm +/- 0,35 Vp-p
(Nur Standard Definition (15kHz))
R, G, B, H, V R, G, B 75 Ohm 0,7 Vp-p positive Polarität
Y 75 Ohm 1,0 Vp-p positive Polarität (mit Synch.)
Cr, Cb 75 Ohm +/- 0,35 Vp-p positive Polarität
(Komponent unterstützt HDTV and >31kHz interlaced und progressiv einschl.
1080i/60,1080i50, 24sF, 25p, 24p 23.98p/sF, 720p/60, aber nicht 60p, RGsB,
RGBS, RGBHV unterstützt HD progressiv und PC progressiv)
H/V-Synch. 1 kOhm / 75 Ohm (wählbar)
0,7 - 4,0 Vp-p / TTL positive/negative Polarität
Beanspruchung N/A
Composite-Synch. 1 kOhm / 75 Ohm (wählbar)
0,7 - 4,0 Vp-p / TTL positive/negative Polarität
Beanspruchung N/A
Synch. auf Grün 75 Ohm 1,0 Vp-p (einschließlich Synch.-
Signalkomponente von 0,3 Vp-p)
Einfach-Link Pixel - Taktfrequenz 165 MHz max.
Dual-Link Pixel - Taktfrequenz 202,5 MHz max. 
						

							E-84
SDHV SMPTE 259M Pegel C
HDTV SMPTE 292M (einschließlich 24sF, 24p)
4 Schlitze (eine Platine für die VIDEO-Platine und die analoge RGB-Eingangsplatine
gehören zur Grundausstattung; 2 Schlitze sind für eine Erweiterung vorgesehen)
Video Eingang BNC x 1 (Composite-Video)
Eingang BNC x 2 (S-Video)
Eingang BNC x 3 (DVD-Komponente)
Analog RGB Eingang BNC x 5
(mit den Komponenten-Eingangsanschlüssen
 geteilt)
Audio Eingang RCA (L / MONO, R) x 1 (ohne Funktion)
Digital RGB Eingang DVI-D x 1
Audio Eingang Stereo-Minibuchse x 1 (ohne Funktion)
SDI Eingang BNC x 2
SDI Ausgang BNC x 1
A Typ x 1
RJ-45 x1
In (Ein) Stereo-Minibuchse x 1, XLR-Anschluss x 1
Out (Aus) Stereo-Minibuchse x 1
In (Ein) D-Sub 9-polig x 1
Out (Aus) D-Sub 9-polig*
3 x 1
Typ II x 1
Mini D-Sub 15-polig x 1
200 - 240V Wechselstrom, 50/60Hz
3,0 KW
15 A
690mm (W) x 1018mm (T) x 547mm (H)
27,2” (W) x 40,1” (T) x 21,4” (H)
88,3kg / 194,7lbs (ohne Objectiv)
Betriebstemperatur: 50˚ bis 95˚F (10˚ bis 35˚C)
Feuchtigkeit: 20 bis 80% nicht-kondensierend
Lagertemperatur: 14˚ bis 122˚F (-10˚ bis 50˚C)
Feuchtigkeit: 20 bis 80% nicht-kondensierend MM-SDI
(Zusatzplatine)
Eingangs-/ Ausgangsanschluss
Eingangsschlitz
MM-VIDEO
(integriert)
MM-RGB
(integriert)
MM-DVI
(Zusatzplatine
MM-SDI
(Zusatzplatine)
USB Port
LAN Port
Fernbedienung
PC-Steuerung
PC-Karten
Ex. Steuerung
Leistungsanforderung
Leistungsaufnahme
Eingangsstrom
Abmessungen
Gewicht, netto
Umgebung 
						

							E-85
*1:Die zulässige Abweichung für RGB-Konvergenz (Bildpunkt-Abweichung) beträgt in der Mitte 1/2 Pixel; 3/4 Pixel oder weniger
im Umfang (wenn sich der Projektions-Aufwärtswinkel auf 0˚ beläuft).
*2:Bei Benutzung des Zoom-Objektives ist es empfehlenswert, den Projektor in einem Winkel von -15 bis +15 Grad von der
Horizontale ausaufzustellen.
*3:Diese Anschlüsse sind für eine künftige Erweiterung vorgesehen.
Technische Daten können ohne vorherige Benachrichtigung geändert werden.
Digital Light Processing, DLP, Digital Micromirror Device und DMD sind Warenzeichen von Texas Instruments. Verordnungen USA UL60950 FCC Klasse A
Kanada CSA60950 ICES-003 Klasse A
Europa EN60950 EN55022 Klasse A
EN55024
EN61000-3-2
EN61000-3-3
Japan J60950 VCCI Klasse A 
						

							E-86
Unit = mm (inch)
3 Cabinet Dimensions
8. Appendix
HIGHlite 14000HD 
						

							E-87 
						

							E-88
Signal Resolution Frequency H. Refresh Rate MM- MM-RGB MM- MM-
( Dots ) ( kHz ) ( Hz ) VIDEO RGsB RGBS RGBHV YCrCb SDI DVI
8. Appendix
4 Compatible Input Signal List
VIDEO NTSC – 15.7 60.0 A (Composite PAL/SECAM – 15.6 50.0 A 
S-Video) PAL60 – 15.7 60.0 A 
SDTV 480i 720   483 15.7 60.0 A (Colour2) 575i 720   575 15.6 50.0 A 
480p 720   483 31.5 60.0FUUAU1
575p – 31.3 50.0FUUAU1
HDTV 1080i60 19201080 33.8 60.0FAA
Analogue1080i50 19201080 28.1 50.0FAA
or1080sF24 19201080 27.0 48.0FAvia DVI720p60 1280720 45.0 60.0FUUAU1
1080p30 19201080 33.8 30.0FUUAU1
(Colour2) 1080p25 19201080 28.1 25.0FUUAU1
1080p24 19201080 27.0 24.0FUUAU1
SD-SDI * 480i 720483 15.7 60.0A
575i 720575 15.6 50.0AHD-SDI * 1080i60 19201080 33.8 60.0A
1080i50 19201080 28.1 50.0A
1080sF24 19201080 27.0 48.0A720p60 1280720 45.0 60.0A
1080p30 19201080 33.8 30.0A
1080p25 19201080 28.1 25.0A1080p24 19201080 27.0 24.0A
RGB 640480 31.5 60.0AAAFA
(Analogue and DVI)640480 37.9 72.8AAAFA640480 37.5 75.0AAAFA
640480 43.3 85.0AAAFA800600 31.25 50.0AAAFA
800600 35.2 56.3AAAFA
800600 37.9 60.3AAAFA800600 48.1 72.2AAAFA
800600 46.9 75.0AAAFA
800600 53.7 85.1AAAFA1024768 40.0 50.0AAAFA
1024768 48.4 60.0AAAFA
1024768 56.5 70.1AAAFA1024768 60.0 75.0AAAFA
1024768 68.7 85.0AAAFA
1152864 67.5 75.0AAAFA1280   960 50.0 50.0AAAFA
1280960 60.0 60.0AAAFA
1280960 85.9 85.0AAAFA12801024 52.8 50.0AAAFA
12801024 64.0 60.0AAAFA
12801024 80.0 75.0AAAFA12801024 91.1 85.0AAAFA
14001050 54.5 50.0AAAFA
14001050 65.2 60.0AAAFA14001050 64.0 60.0AAAFA
14001050 82.2 75.0AAAFA
14001050 93.6 85.0AAAFA16001200 62.5 50.0AAAFA
16001200 75.0 60.0AAAFA
19201080 56.25 50.0AAAFA
Code: A - Auto, projector detects and dsiplays correctly
F - Format change required see Projector “Adjust (source)/Signal Type (page E55)
U - User setup required see Optimising RGB picture Automatically (Page E33),  (U
1 also requires separate syncs) - Not Supported 
						

							E-89
2Colour space for SDTV and HDTV via DVI will be RGB colour space - can be changed using Colour Matrix function.
* SD-SDI and HD-SDI signals can be input when the optional MM-SDI has been installed.
• At the time of shipping, adjustment is made to the standard signal of the display resolution/frequency; however, adjust-
ment may be required depending on the type of personal computer.
• SDTV and HDTV signals also support a vertical frequency of fV/1.001.
• RGB signals support analog and DVI.
• Please contact your dealer about details concerning the connection of signals other than the aforementioned.
• Composite sync and other signals might not be displayed properly.
• When the resolution has been converted for the display (and is not the real resolution of the display), the thickness and
other aspects of the characters and ruled lines might not be uniform. 
						

							E-90
8. Appendix
Pin # Signal Name Function I/O1 NC Not used –2 RxD Reception data Input3 TxD Transmission data Output4 NC Not used –5 GND Ground potential GND6 NC Not used –7 RTS Transmission request Output8 CTS Transmission permission Input
9 NC Not used –
Pin # Signal Name Function I/O1 NC Not used –2 RxD- Reception data - Input3 TxD+ Transmission data + Output4 NC Not used –5 GND Ground potential GND6 NC Not used –7 RxD+ Reception data + Input8 TxD- Transmission data - Output
9 NC Not used –
5Pin Assignment of PC CONTROL IN Con-
nector (D-Sub 9 Pin)
Using RS-232C
Using RS-422
6Pin Assignment of REMOTE IN 3 Connec-
tor (XLR connector)
Pin # Function I/O
1 Ground potentiul GND2 DC+3.3V PWR
3 Remote Control Input I
7Pin Assignment of EXT. I/O Connector
(Mini D-Sub 15 Pin)
The various control and switching operations are enabled by ei-
ther opening (OPEN) or short circuiting (SHORT) the pin number
15 (GND) of the external control connector (EXT. I/O) with the
various pins listed in the table below.
51423
10
11 12 13 14 156 978
• Control Functions
Pin # OPEN SHORT14 EXT CTL OFF EXT CTL ON5 POWER OFF POWER ON
10 PICTURE MUTE OFF PICTURE MUTE ON
* When there is no supported input channel, “None” is displayed
on the LCD screen of the projector.
NOTE: When using the external control connector (EXT. I/O) to control the Projec-
tor, short circuit pin number 14 (EXT CTL ON/OFF) and pin number 15 (GND), and
operate according to the above table with the external control (EXT CTL) set to ON.
• Input Switching (0 = SHORT, 1 = OPEN)
Pin # (Bit)
SLOT Factory Default11 (b3) 12 (b2) 8 (b1) 4 (b0)0 0 0 0 1-1 VIDEO1 (CV)0 0 0 1 1-2 VIDEO2 (S-Vid)0 0 1 0 1-3 VIDEO3 (CMP)01002-1 RGB0 1 0 1 2-2 None0 1 1 0 2-3 None1 0 0 0 3-1 None1 0 0 1 3-2 None1 0 1 0 3-3 None1 1 0 0 4-1 None1 1 0 1 4-2 None
1 1 1 0 4-3 None