DiBoss Lt 32hlfh Instruction Manual
Have a look at the manual DiBoss Lt 32hlfh Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 2 DiBoss manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ENGLISH 2211 On Screen Menus and Displays 1. Press the MENUbutton to display main menu. 2. Press the PRx/PRybutton to select menus-Picture, Sound, Special, Setup. 3. Adjust each menu with the Ïqbutton. 4. Press the MENUbutton to return to preceding menu. 5. Press the TV/AVbutton to finish adjusting menu. Position:▲▼ Next:◀▶ Exit:TV/AVPosition:▲▼ Adjust:◀▶ Back:MENUExit:TV/AV Position:▲▼ Next:◀▶ Back:MENUExit:TV/AV Position:▲▼ Next:◀▶ Back:MENUExit:TV/AV Position:▲▼ Next:◀▶ Back:MENUExit:TV/AVPosition:▲▼◀▶ Back:MENUExit:TV/AV Position:▲▼ Adjust:◀▶ Back:MENU Exit:TV/AV Position:▲▼ Adjust:◀▶ Back:MENU Exit:TV/AV Position:▲▼ Adjust:◀▶ Back:MENU Exit:TV/AV Position:▲▼ Back:MENU Exit:TV/AV Main MenuPicture q Sound q Special q Setup q Picture Contrast 90 Brightness 75 Colour 75 Sharpness 60 EqualizerFlat Music Movie Speech User Clock Auto Programme Manual ProgrammeProgramme 1 Channel 69 Table V/UHF System BG Search ▶▶▶ Memorize Name ----- Equalizer ▶ Balance 0 AVL Off Surround Off Sound Mode MONO Sound Clock ▶ Blue Back Off Auto Sleep Off Childlock Off Radio Off ARC 16:9 Special Auto Programme ▶ Manual Programme ▶ Programme Edit ▶ Language ▶ Setup 0.1 0.5 1.5 5.010KHz Programme EditP00----- P05----- P01----- P06----- P02----- P07----- P03----- P08----- P04----- P09----- ■Delete ■Name ■Move ■Skip Clock --:-- Off Time --:-- Off On Time --:-- Off On Programme 1 System BG Start
12 Setting up TV Programme Once you have preset the programmes, you will be able to use the PRx/PRyor NUMBERbuttons to scan the programmes you programmed. Programmes can be tuned using automatic or manual modes. Auto Programme All programmes that can be received are stored by this method. It is recommended that you use Auto programme during installation of this set. 1. Press the MENU button. 2. Select the Setupmenu. 3. Press the Ïqbutton to select the Setup menu. 4. Select the Auto Programme menu. 5. Press the Ïqbutton to select the Auto Programme menu.6. Press the Ïqbutton to select System. BG: (Germany/Asia/M.East/Africa/Australia) I : (UK/Hong Kong/South Africa) DK: (CIS/China/East Europe) L: (France) 7. Select the Startmenu to start Auto Programme. 8. Press the MENUbutton to stop Auto programme 9. Press the TV/AVbutton to return to normal TV viewing. Position:▲▼ Adjust:◀▶ Back:MENU Exit:TV/AV Auto Programme System BG Start
ENGLISH 2213 Setting up TV Programme Manual ProgrammeManual Programme lets you manually tune and arrange the programmes in whatever order you desire. Also you can assign a programme name with 5 characters to each programme number. 1. Press the MENUbutton. 2. Select the Setupmenu. 3. Select Manual Programmemenu. 4. Select a programme with the Ïqbutton or number buttons. 5. Press the PRx/PRybutton to select Channelmenu. 6. Press the Ïqbutton or directly number buttonsto select a Channel. 7. Press the PRx/PRybutton to select the Tablemenu. 8. Press the Ïqbutton to select V/UHFor Cableas required. 9. Select a TV system with the Ïqbutton. BG: (Germany/Asia/M.East/Africa/Australia) I : (UK/Hong Kong/South Africa) DK: (CIS/China/East Europe) L: (France) 10. Press the PRx/PRybutton to select Searchmenu. When you press the Ïqbuttons, the TV starts tosearch adjacent channel downward or upward. 11. Press the PRx/PRybutton to select Memorizemenu.12. Press the Ïqbutton to store it. 13. Press the MENUbutton to return to prior menu. 14. Press the TV/AVbutton to return to normal TV viewing. Position:▲▼ Adjust:◀▶ Back:MENU Exit:TV/AV Manual ProgrammeProgramme 1 Channel 69 Table V/UHF System BG Search ▶▶▶ Memorize Name -----
14 Setting up TV Programme Deleting a programme 1. Select a programme to be deleted with the PRx/PRyor Ïqbutton.2. Press the REDbutton once. The selected programme is deleted, all the following programme is shifted up one position. Naming a programme 1. Select a programme to be named with the PRx/PRyor Ïqbutton.2. Press the GREENbutton. Then it display as below. 3. Press the PRx/PRybutton repeatedly to edit programme name.You can use the numeric 0 to 9, the alphabet A to z(capital and small letters.) a blank and -. With the Ïqbutton, you can select in the opposite direction. 4. Press the OKbutton to store it. 5. Press the MENUbutton to return to prior menu. 6. Press the TV/AVbutton to return to normal TV viewing. Moving a programme 1. Select a programme to be moved with the PRx/PRyor Ïqbutton.2. Press the YELLOWbutton. 3. Move the programme to desired programme number with the PRx/PRyor Ïqbutton. 4. Press the YELLOWbutton again to release this function. Skipping a programme number 1. Select a programme number to be skipped with the PRx/PRyor Ïqbutton. 2. Press the CYANbutton. The skipped programme turns to blue. 3. Press the CYANbutton again to release the skipped programme. Programme EditThis function enables you to delete or skip the stored programmes. Also you can move some programmes to other programme numbers or insert a blank programme data into the selected programme number. 1. Press the MENUbutton. 2. Select the Setupmenu. 3. Press the Ïqbutton to select the Setup menu. 4. Press the PRx/PRybutton select Programme Editmenu. 5. Press the Ïqbutton to select the Programme Edit menu. 6. Select the programme name to edit with the PRx/PRyand Ïqbutton. Note:When a programme number is skipped it means that you will be unable to select it using the PRx/PRybutton during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme Edit. Position:▲▼◀▶ Back:MENUExit:TV/AV Programme EditP00----- P05----- P01----- P06----- P02----- P07----- P03----- P08----- P04----- P09----- ■Delete ■Name ■Move ■Skip Adjust:▲▼◀▶ Confirm:OK Back:MENU Exit:TV/AV Edit Name ▲Station P01 -----▼
ENGLISH 2215 Picture Control You can adjust picture Contrast, Brightness, Colour, Sharpnessand Tint(only in NTSC mode) to the levels you prefer. PICTURE Effect1. Press the PICTURE( ) button. 2. Press the PICTURE( ) button repeatedly to select. Each press of the button changes the screen display as below. Dynamic →Standard →Mild →Game →User • Dynamic: Vivid Picture Appearance • Standard: Standard Picture Appearance • Mild: Softer Picture Appearance • Game: External Video Game Picture Setup • User: Manual Picture Setup Auto Picture Control*The Picture options - Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed. Selected Item Contrast Brightness Colour Sharpness Tint*Setting Change More darkness Ï0~100 qMore light Less bright Ï0~100 qMore bright Lower color intensity Ï0~100 qHigher color intensity Soft picture Ï0~100 qSharp picture More purple Ï-50~50 qMore green Manual Picture Control1. Press the MENUbutton. 2. Select the Picturemenu. 3. Press the PRx/PRybutton select a picture item. 4. Press the Ïqbutton to adjust the picture condition as you want. 5. Press the TV/AVbutton to store for the picture User. Position:▲▼ Adjust:◀▶ Back:MENUExit:TV/AV Picture Contrast 90 Brightness 75 Colour 75 Sharpness 60
16 Sound Control You can select your preferred sound setting; Flat, Music, Movieor Speech. You can also adjust the sound frequency of equalizer, balance. If you switch AVLto on, the set automatically keeps on an equal volume level even if you change programmes. 1. Press the MENUbutton. 2. Select the Soundmenu. 3. Press the Ïqbutton to select the Sound menu. 4. Press the PRx/PRybutton to select the desired sound item; Equalizer, Balance, AVL, Surroundor Sound Mode. 5. Press the Ïqbutton to make desired adjustment. 6. Press the Ïqbutton in Equalizerto set theEqualizer. 7. Press the PRx/PRybutton to select your preferred setting ; Flat, Music, Movie, Speechor User. To set the Equalizer User. a. Select Userby pressing the PRx/PRybutton. b. Select a sound band by pressing the Ïqbutton. c. Make appropriate sound level with the PRx/PRybutton. d. Press the MENUbutton to return to preceding menu.8. Press the PRx/PRybutton to the Balancemenu. 9. Select the Balancemenu with the Ïqbuttonand adjust the balance of speaker. 10. Select the AVL(Automatic Volume Leveler) menu ONor OFF. 11.Select the Surroundmenu Onor Off. 12.Select the Sound Mode menu. If the sound quality is poor while you are watching a programme broadcast in Stereo, select MONOwith the Ïqbutton. Press the Ïqbutton to switch between MONOand STEREO.(Please note that it works only when the broadcast is done in stereo). If a programme is received in two language(dual language), you can switch to DUAL Ⅰor DUALⅡby pressing the Ïqbutton repeatedly. DUALⅠsends the primary broadcast language to the loudspeakers. DUALⅡsends the secondary broadcast language to the loudspeakers. Position:▲▼ Back:MENU Exit:TV/AV EqualizerFlat Music Movie Speech User 0.1 0.5 1.5 5.010KHz Position:▲▼ Next:◀▶ Back:MENUExit:TV/AV Sound Equalizer ▶ Balance 0 AVL Off Surround Off Sound Mode MONO
ENGLISH Sound Control 2217 SOUND Effect1. Press the SOUND( )button. 2. Press the SOUND( ) button repeatedly to select. Each press of the button changes the screen display as below. Flat →Music →Movie →Speech →User Auto Sound Control* The sound Flat,Music,Movieand Speechare programmed for good sound reproduction at the factory and cannot be changed.• Choose Flatfor the standard factory settings. • Choose Musicwhen watching music video or concerts. • Choose Moviewhen watching movies. • Choose Speechwhen watching a show that is mostly dialogue. • Choose Userto recall your personalized settings.
18 Other functions You can control other functions; Clock, Blue Back, Auto Sleep, Childlock, Radioand ARCmenu. ClockSetting the clock is necessary in order to use the various timer features of the TV. You can set automatic TV Onor Offtime. 1. Press the MENUbutton. 2. Press the PRx/PRybutton to select the Specialmenu. Then press the Ïqbutton. 3. Press the Ïqbutton to select Clockmenu. 4. Set the present time with the numeric buttons and the PRx/PRybutton on remote controller. Store a time value between 00:00 … 23:59 (hours:minutes)5. Press the PRx/PRybutton to select Off Time. 6. Set the TV off time with the numeric buttons and the PRx/PRybutton. Then press the Ïqbutton. Select On or Offwith PRx/PRybutton.(When the setting is off, the TV set will be switched off to stand by mode.) 7. Press the PRx/PRybutton to select On Time. 8. Set the TV on time with the numeric buttons and the PRx/PRybutton. Then press the Ïqbutton. Select Onor Offwith PRx/PRybutton. When the setting is On, the set will be switched On automatically to the last selected programme. 9. Press the PRx/PRybutton to select On Programme. You can select the first displayed programme with the Ïqbutton when the set is switched on automatically. 10. Press the TV/AVbutton to return to normal TV viewing. Note. The present time must be set for using the Clockfunction. Blue BackIf no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must select the Blue Back Off.(Pressing the Ïqbutton will alternate between “On” and “Off”.) Position:▲▼ Next:◀▶ Back:MENUExit:TV/AV Special Position:▲▼ Adjust:◀▶ Back:MENU Exit:TV/AV Clock Clock --:-- Off Time --:-- Off On Time --:-- Off On Programme 1 Clock ▶ Blue Back Off Auto Sleep Off Childlock Off Radio Off ARC 16:9
Other functions 19 Auto SleepIf you select Auto Sleep Onthe set will automatically switch itself to standby mode approximately ten minutes after a TV Channel stops broadcasting. 1. Press the MENUbutton. 2. Select the Specialmenu. 3. Press the Ïqbutton to select the Special menu. 4. Press the PRx/PRybutton to select Auto Sleep. 5. Press the Ïqbutton to select On. 6. Press the TV/AVbutton to return to normal TV viewing. Note.If the set connects with the external input source in the middle of a lapse of 10 minutes after a TV channel stops broadcasting, Auto Sleep function is automatically canceled. Childlock Childlock menu is necessary in order to disable the buttons on the side panel of the set. Especially it is useful to prevent unauthorized viewing. 1. Press the PRx/PRybutton to select Childlock. 2. Press the Ïqbutton repeatedly to select Onor Off. * When the setting is Childlock On, the buttons on the side panel of the set is disabled. * When the setting is Childlock Off, the buttons on the side panel of the set is enabled. RadioYou can listen to radio with the set. 1. Press the MENUbutton. 2. Press the PRx/PRybutton to select the Specialmenu. Then press the Ïqbutton. 3. Press the PRx/PRybutton to select Radio. 4. Press the Ïqbutton to select Radio Onor Off. Note.When the setting is On, you can adjust radio function in radio mode. (see page 20) ARC ( )(Aspect Ratio Control)You can watch TV in various picture formats; Auto, 16:9, 14:9, 4:3, 16:9 Zoom, 14:9 Zoom, 4:3 Zoom. Repeatedly press the ARC( ) button to select your desired picture format. Auto When your set receives the wide screen signal, it will change automatically the picture format that has been sent. 16:9You can enjoy the cinema or general TV programme through the 16:9 mode. The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full. 14:9You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode.The screen 14:9 is viewed just like that the screen 4:3 is magnified to the upper/lower and left/right. 4:3This picture format is 4 to 3 of general TV. 16:9 ZoomMagnifies the size of the picture on screen 16:9. 14:9 ZoomMagnifies the size of the picture on screen 14:9.4:3 ZoomMagnifies the size of the picture on screen 4:3.Note.In Zoommode, you can adjust the position of the picture with PRx/PRybutton. (It’s possible when the ARCinformation is displayed on screen.)
20 Radio Control This function is possible only when the set is in Radio mode.(Radio mode is displayed when the Setting for special menu is radio On.) 1. Use TV/AVbutton on remote controller to select Radio mode. 2. Press the MENUbutton to set Radio Setupmenu. 3. Press the Ïqbutton repeatedly to select Mode Autoor Manual. * When the Radio Setup Mode is Auto, only the programmes stored in memory are selected. * When the Radio Setup Mode is Manual, all frequencies are selected. 4. Press the PRx/PRybutton select Frequency. Then press the Ïqbutton repeatedly to tune in the desired station manually. If you press the Ïqbutton continually above 2 seconds, It automatically changes present frequency into next frequency. 5. Press the PRx/PRybutton to select Programme. Then press the Ïqbutton repeatedly to select programme. 6. Press the PRx/PRybutton to select memorize. If you want to memorize this radio setup, press the Ïqbutton. 7. Press the PRx/PRybutton to select Delete. Select Off with the Ïqbutton to delete the station. 8. Press the PRx/PRybutton to select Auto Programme. 9. Press the Ïqbutton repeatedly to automatically scans and tunes to the next available station. 10. Press the PRx/PRybutton to select Off Time. Then press theÏqbutton repeatedly toselect Off, 5, 10, 30(minutes).The on-screen displays disappear after time selected.(when you select Off, the on-screendisplayswill not disappear.) The displays identifies the status of radio settings. 11. Press the PRx/PRybutton to select Edit Name. Then press the Ïqbutton to edit radio name. 12. You can assign a radio name with 8 characters. Press the PRx/PRybutton repeatedly. You can use the numeric 0 to 9, the alphabet A to z(capital and small letters.) and a blank. With the Ïqbutton, you can select in the opposite direction. 13. Press the MENUbutton to return to prior menu. 14. Press the TV/AVbutton to exit. Then the radio setting condition is displayed. Note. If you want to listen to the radio, the ANT.jack must be connected to the antenna input of the set. And Radio function is available when the setting for Special menu is Radio On. Position:▲▼ Next:◀▶ Exit:TV/AV Mode Auto Frequency 87.50 MHz Programme 1 Memorize Delete Auto Programme▶ Off Time Off Edit Name▶ Name -------- Radio Setup Start:◀▶ Back:MENUExit:TV/AV Start Radio Auto Programme Adjust:▲▼◀▶ Confirm:OK Back:MENU Exit:TV/AV Radio Name Edit ▲Station P01 --------▼