Denon D M51dvs Operating Instructions

81
ENGLISH
(1) Setting the clock (12-hour display)
18USING THE TIMER
1Turn on the power.
2Press the MENU/SET button to display “Ti m e”.
MENU / SET
Main unit
•If the time has not yet been set or if there has been a
power shortage, the time display flashes.
• If the time has been set, the current time is displayed.
3Press the MENU/SET button and hold it in for over 2 seconds.
•The hours position flashes.
Time AM1\b:00
Adj AM1\b:00MENU / SET
Main unit
Example: Setting the current time to “7:30 p.m.”
6Turn...

82
ENGLISH
Example 1: Listening to preset station “3” (FM 92.5 MHz) from p.m.12:35 to p.m.12:56 with the everyday timer
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER   ADV-M51
TONE / SDB
FUNCTION MENU / SET+-
SURROUND / SELECTPUSH - PARAM.
1,18 2,3,4,6,8
,
10,12,14,16 
3,5,7,9,11,
13,15,17
(2) Setting the everyday timer and once timer
2 Be sure to set the current time before setting the timer. (See page 81.)
2 Use the everyday timer to switch the power on and off (standby) once a\
t the same time...

83
ENGLISH
10Press the MENU/SET button.
•The  “PM12” in the hours place is stored in the memory.
MENU / SET
Main unit
E on PM1\b:00
11Turn the SURROUND/SELECT knob and set the minutes
place to “35”.
E on PM1\b:35
SURROUND / SELECTPUSH - PARAM.
12Press the MENU/SET button.
•The start time is stored in the memory and the unit is set
to the timer stop time setting mode.
•“ E” and “off” light.
Main unit
MENU / SET
Main unit
E offAM1\b:00
13
Turn the SURROUND/SELECT knob to set the hours place to
“PM12”.
E...

84
ENGLISH
Example 2: Listening to a CD with the once timer
B
BAND
PHONES
VOLUME
ON / STANDBY DVD SURROUND RECEIVER   ADV-M51TONE / SDB
FUNCTION MENU / SET+-
SURROUND / SELECTPUSH - PARAM.
1
3,4,5,7
4,6
2
2
1Turn on the power.ON / STANDBY
Main unit
4Turn the SURROUND/SELECT knob to display “ONCE”, then
press the MENU/SET button.
SURROUND / SELECTPUSH - PARAM.
Main unit
ONCE
The display switches as follows
each time the
SURROUND/SELECT knob is
turned:
2Open the disc holder, load the CD,
then close the...

85
ENGLISH
(3) Turning the everyday timer and once timer on and off
•After the timer has been set using the procedure described under  “(2) Setting the everyday timer and once timer” (pages 82 to 83), turn the
everyday timer and/or once timer on so that the set operations will be p\
erformed.
B
BAND
PHONES
VOLUME
ON / STANDBY DVD SURROUND RECEIVER   ADV-M51TONE / SDB
FUNCTION MENU / SET+-
SURROUND / SELECTPUSH - PARAM.
1
2
1Press the MENU/SET button to set the timer standby setting
mode.
•
The current...

86
ENGLISH
•If the times set for the everyday timer and once timer overlap, the once\
 time has priority.
(4) Everyday timer and once timer priority
2 Checking the timer settings
• Use the same procedure as when setting the timer to check the timer sett\
ings.
q Press the MENU/SET button to display “TIMER”.
w Turn the SURROUND/SELECT knob to display  “EVERYDAY” or “ONCE”.
e The display switches between the set function, start time, stop time and\
 timer standby indicator each time the MENU/SET button  is...

87
ENGLISH
•The included remote control unit can be used to turn the power to the st\
andby mode after a maximum of 120 minutes. (Sleep timer )
• Use this function to automatically switch the power to the standby mode \
after a specific amount of time (minutes).
Example:  To set the power to the standby mode in 50 minutesaccording to the clock.\
 Be sure to correct the current time setting .
(6) Setting the sleep timer (remote control unit only)
1Select and play the desired function.
2Press the SLEEP...

88
ENGLISH
SETUP  MENU
QUICK  SETUP
SYSTEM  SETUP
DVD  SETUP
EXIT  SETUP
SELECT : DECISION : ENTER  BUTTON
DENON  
19CHANGING THE DEFAULT SETTINGS (DVD)
Remote control unit
Remote control unit
ENTER
1
2In the stop mode, press the SETUP button.
At the Setup Menu, use the • and \fcursor buttons to select
“DVD SETUP” and press the ENTER button.
The setup (default settings) screen  “DVD SETUP MENU”
appears.
• DISC SETUP
Use this to set the language to be used when playing the
disc.
If the set language is not...

89
ENGLISH
Use the 0and 1cursor buttons to select the “DISC
SETUP”, then press the ENTER button.
• DIALOG
Use this to set the language of the sound output from
the speakers.
• SUBTITLE
Use this to set the language of the subtitles displayed on
the TV.
• DISC MENUS
Use this to set the language of the menus recorded on
the disc (top menu, etc.).
To exit the disc setup mode
Use the  •and 
\fcursor buttons to select “> NEXT DVD
MENU”, then press the ENTER button.
Use the  •and 
\fcursor buttons to select the...

90
ENGLISH
To exit the dialog mode
Press the ENTER button, you can go back to the previous
screen.
2 When 
“SUBTITLE” is selected:
• OFF (Factory default)
Select this if you do not want to display the subtitles. (For
some discs it is not possible to turn off the subtitle
display.)
• ENGLISH
Select this when you want to play the DVD with the
subtitles in English.
• FRENCH
Select this when you want to play the DVD with the
subtitles in French.
• SPANISH
Select this when you want to play the DVD with the...