Denon D M51dvs Operating Instructions
Here you can view all the pages of manual Denon D M51dvs Operating Instructions. The Denon manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.
Page 101
101 ENGLISH 2Making system connections between the ADV-M51 and the D-M31 series cassette deck (DRR-M31) makes operation even\ easier. (For instructions on connections, refer to “Connecting to D-M31 Series System Components ” on pages 10 to 11.) 2 System functions will not work properly if the input/output function set\ tings are not right for the connected components. Be su re to set the input/output functions for the components being used. (See page 38.) T\ he setting contents are maintained until...
Page 102
102 ENGLISH (3) CDÆ ÆTAPE recording (when the ADV-M51 and DRR-M31 are connected with a system cord) •CDs can easily be recorded onto cassette tapes. [2] Synchronized CD recording Perform the same operations as for steps 1 to 5 above. y Press the CD synchronized recording button on the cassette deck. •Recording of the CD starts automatically. CD SRS DRR-M31 Once all the tracks on the CD have been played, both the ADV- M51 and cassette deck are automatically set to the stop mode. Even if the entire CD has...
Page 103
103 ENGLISH (4) Edited recording (when the ADV-M51 and DRR-M31 are connected with a system cord) •The tracks on the CD can be automatically divided into sides A and B for\ recording according to the length of the cassette tape (tape time). (For CDs only) • Edited recording is possible for CDs containing up to 25 tracks. For CDs\ with 26 tracks or more, editing is not possible. 1 2 Open the cassette holder, load the cassette tape onto which you want to record, then close the cassette holder. Load the...
Page 104
104 ENGLISH 6 Press the play/pause button on the ADV-M51 or the DVD play button on the remote control unit. •Playback of the CD and recording onto the cassette tape start simultaneously. ADV-M51 01Tr 00:01 To quit the edited recording function, press the ADV-M51’ s stop button.BAND2 ADV-M51 Remote control unit NOTES: • The edited recording function cannot be used with CDs containing 26 trac\ ks or more. • Load the cassette tape onto which you want to record into the cassette d\ eck ’s cassette tray with...
Page 105
105 ENGLISH 21LAST FUNCTION MEMORY •This unit is equipped with a last function memory which stores the input\ and output setting conditions as they were immediately before the power is switched off. This function eliminates the need to perform complicated resettings when\ the power is switched on. • The unit is also equipped with a back-up memory. This function provides memory storage when the power switch is off and\ with the power cord disconnected. 22INITIALIZATION OF THE MICROPROCESSOR When the...
Page 106
106 ENGLISH Check again before assuming the player is malfunctioning 2Are all the connections correct ? 2Are you following the instructions in the manual ? 2Are the speakers and other components operating properly ? If this unit does not seem to be functioning properly, check the table below. If this does not solve the problem, this unit may be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of\ purchase or nearest Denon sales office. 23TROUBLESHOOTING...
Page 107
107 ENGLISH SymptomPage Check DVD operation Playback does not start when PLAY button is pressed. Playback stops immediately. — 8 9 • Is there condensation on the disc or player ? (Let stand for 1 or 2 hou\ rs.) • Discs other than DVDs, video CDs and music CDs cannot be played. • Disc is dirty. Wipe off the dirt. Menu playback of video CD’ s is not possible. — • Menu playback is not possible with anything but video CDs with playback \ control. Picture is disturbed during the search operation. — • Some...
Page 108
108 ENGLISH 24SPECIFICATIONS 2Audio Section •Power Amplifier Section Rated output: Front: 20 W + 20 W (8 Ω/ohm load, 20 Hz to 20 kHz, T.H.D. 0.08%) Practical maximum output: Front: 35 W + 35 W (6 Ω/ohm load, 1 kHz) Output terminals: Speaker impedance: 6 to 16 Ω/ohms • Analog Section Input sensitivity/Input impedance: 200 mV/47 kΩ/kohms Frequency response: 10 Hz to 50 kHz: +0, –3 dB (2 Channel setting, direct mode) Signal-to-noise ratio: 98 dB (Direct mode) Rated output: 0.6 V (Subwoofer PRE OUT)...
Page 109
109 ENGLISH 2Speakers SYS-M51 (D-M51DVS only) •Satellite speaker system (SC-A3L) Type: 2-way, 3-speakers Closed box / Low-leakage-flux Speakers: 5.7 cm cone bass-mid x 2 1.9 cm super-high range x 1 Input impedance: 6 Ω/ohms Max. input: 40 watts (IEC) 100 watts (PEAK) Frequency range: 120 Hz ~ 90 kHz Dimensions: 70 (W) x 210 (H) x 161 (D) mm (3-3/4” x 8-17/64” x 6-11/32”\ ) Mass: 1.1 kg (2 lbs 7 oz) • Active subwoofer (DSW-3L) Type: 1-way, 1-speaker Reflex box / Low-leakage-flux / Built-in amplifier...