Dell U2410f Manual

							* U2410 Color Gamut (Typical) is based on CIE1976 (110%) and CIE1931 (102%) . 
Resolution    
Horizontal scan range   30 kHz to 81 kHz (automatic)    
Vertical scan range   56  Hz to 76 Hz    
Maximum resolution   1920  x 1200 at 60 Hz  
Video Supported Modes  
Video display capabilities (DVI playback)   480i/480p/576i/576p/720p/1080i/1080p (Supports HDCP)  
Video display capabilities (Composite playback)   NTSC/PAL  
Video display capabilities (HDMI playback)   480i/480p/576i/576p/720p/1080i/1080p  
Video display capabilities (Component playback) 480i/480p/576i/576p/720p/1080i /1080p 
Preset Display Modes  
The following table lists the preset modes for which Dell guarantees image size and centering:   
Display Mode   Horizontal Frequency 
(kHz)   Vertical 
Frequency 
(Hz)   Pixel Clock (MHz)   Sync Polarity 
(Horizontal/Vertical)  
VGA, 720 x 400   31.5   70.1   28.3   - /+  
VGA, 640 x 480   31.5   59.9   25.2   - / -  
VESA, 640 x 480   37.5   75.0   31.5   - / -  
VESA, 800 x 600   37.9   60.3   40.0   +/+  
VESA, 800 x 600   46.9   75.0   49.5   +/+  
VESA, 1024 x 768   48.4   60.0   65.0   - / -  
VESA, 1024 x 768   60.0   75.0   78.8   +/+  
VESA, 1152 x 864   67.5   75.0   108.0   +/+  
VESA, 1280 x 1024   64.0   60.0   108.0   +/+  
VESA, 1280 x 1024     80.0   75.0   135.0   +/+  
VESA, 1600 x 1 200   75.0   60.0   162.0   +/+  
VESA, 1920 x 1200   74.5   60.0   154.0   +/ -  
Electrical  
The following table lists the electrical specification:   
Video input signals   Analog RGB, 0.7 Volts +/ -  
Digital DVI - D TMDS, 600mV for each differential line, 50 ohm input 
impedance  
HDMI, 600mV for each differential line, 100 ohm input impedance 
per differential pair  
DisplayPort, 600mV for each differential line, 100 ohm input 
impedance per differential pair    
Composite, 1 volt(p - p), 75 ohm input impedance   
Component: Y, Pb, Pr are all 0.5~1volt(p - p), 75 ohm input 
impedance      
Synchronization input signals   separate horizontal and vertical,  
3.3V CMOS or 5V TTL level, positive or negative sync.  
SOG (Sync on green)    
AC input voltage/frequency/current   100 to 240 VAC/50 or 60 Hz  +  3 Hz/2.0A (Max.)  
Inrush current   120V:  40A  (Max.)  
240V:  80A  (Max.)    
Physical  Characteristics  
The following table lists the physical characteristics:     
						

							Connector type   l VGA: Blue Connector   
l DVI - D: White Connector    
l DisplayPort: Black Connector    
l Composite    
l Component    
l HDMI    
Signal cable type   l D - sub: Detachable, Analog, 15pin, shipped attached to the 
monitor    
l DVI - D: Detachable, Digital, 24pin, shipped detached from 
the monitor    
l DisplayPort: Detachable, Digital, 20pin, shipped detached 
from the monitor    
l Composite    
l Component    
l HDMI    
NOTE:   The composite, component and HDMI cables are 
not included with the monitor.   
Dimensions (with stand)    
Height (Compressed)   393.0mm  ( 15.47 inches)  
Height ( Extended )   493.0  mm  ( 19.40 inches)  
Width   559.7 mm  (22.03 inches)  
Depth   201.5 mm  ( 7.93 inches)  
Dimensions (without stand)  
Height  
365.1mm  ( 14.37  inches)  
Width   559.7 mm  (22.03 inches)  
Depth   81.0 mm  (3.18 inches)  
Stand Dimensions  
Height (Compressed)   340.7  mm  ( 13.41 inches)  
Height (Extended)   370.7  mm  ( 14.59 inches)  
Width   309.7 mm  (12.19 inches)  
Depth   201.5 mm  (7.93 inches)  
   
Weight with packaging   11.60 kg ( 25.64  lb )  
Weight with stand assembly and 
cables   19.93 lb )  
Weight without stand assembly  
considerations  -  no cables)     6.50 kg  (14.30 lb)  
Weight of stand assembly     2.41 kg  ( 5.30  lb)  
Environmental  
The following table lists the environmental limitation:   
Temperature    
Operating   )  
Non - Operating   Storage:  -  ( - )  
Shipping:  - ( - )  
Humidity      
						

							 
Universal Serial Bus (USB) Interface  
USB Upstream  C onnector  
   
USB Downstream  C onnector  
   
USB  P orts  
l 1 upstream  -   rear   
l 4 downstream  -   2 on rear; 2 on  left  side  Operating   10% to 80% (noncondensing)  
Non - Operating   Storage: 5% to 90% (noncondensing)  
Shipping: 5% to 90%(noncondensing)  
Altitude    
Operating   3,657.6 m  ( 12,000 ft ) max  
Non - Operating   12,192 m  ( 40,000 ft ) max  
Thermal dissipation   375 BTU/hour (maximum)  
195 BTU/hour (typical)  
This monitor supports High - Speed Certified USB 2.0 interface.
Transfer speed   Data Rate Power 
Consumption
High speed  480 Mbps
Full speed  12 Mbps
Low speed  1.5 Mbps
Pin Number 4 - pin Side of the connector
1 DMU
2 VCC
3 DPU
4 GND
Pin Number 4 - Pin Side of the Signal Cable
1 VCC
2 DMD
3 DPD
4 GND  
						

							Card Reader Specifications  
Overview  
l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.   
   
l The Flash Memory Card Reader is automatically recognized by Microsoft Windows 2000, Windows   Vista and Windows 7 .   
   
l Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.   
   
l All standard file operations (copy, delete, drag - and - drop, etc.) can be performed with this drive.    
Features  
The Flash Memory Card Reader has the following features:  
l Supports Microsoft Windows 2000, Windows XP, Windows   Vista and Windows 7  operating systems  
   
l No Microsoft Windows 9X support from Dell   
   
l Mass Storage Class device (No drivers are required under Microsoft Windows 2000, Windows XP, Windows   Vista and  Windows 7 )   
   
l USB - IF certification   
   
l Supports various memory card media   
 
   
The following table lists the memory cards supported:  
Maximum Card Capacity Supported by the U2410 card reader  
 
General   NOTE:  The monitors 2.0 USB interface functions only if the computer is USB 2.0 compatible.   
  NOTE:  The monitors USB interface works only when the monitor is on or in power save mode. If you switch 
the monitor off and then switch it on, the attached peripherals may take a few seconds to resume normal 
functionality.   
Slot Number   Flash memory cards type  
1  
xD - Picture Card  
Memory Stick Card (MS ) / High  Speed Memory Stick (HSMS)/Memory Stick Pro Card (MS 
PRO)/ Memory Stick Duo (with Adapter)  
Secure Digital Card (SD) / Mini Secure Digital (with Adapter) /TransFlash Card  (with 
Adapter)  
MultiMedia Card (MMC)/Reduced Size  MultiMedia  Card  ( with Adapter )  
Card type  Support Specification  Memory Card 
Spec Version  Support Maximum 
Capacity by Spec  U2410
MS  Memory Stick Standard Format Specification 1.43 128MB Supported
MSPRO Memory Stick Pro Standard Format Specifications 1.02 32GB Supported
MSDuo Memory Stick Duo Standard Format Specifications 1.10 128MB/32GB Supported
MSDuo - HG Memory Stick Duo Standard Format Specifications 1.01 32GB Supported
xD  xD Picture Card Specification  1.2  2GB Supported
SD SD Memory Card Specifications  2.0  32GB Supported
MMC MultiMedia Card System Specification  4.2  32GB Supported
NOTE:  MSPRO includes MSPRO Duo and MS Micro.   
NOTE:  xD includes TypeM and TypeH.   
NOTE:  SD includes HS - SD, MiniSD and SD Micro. SD v2.0 spec includes SDHC.   
NOTE:  MMC includes MMCPlus, RS - MMC, MMC Mobile and MMC micro.   
Connection type USB 2.0 High Speed Device (USB Full Speed Device compatible)  
Supported OS Microsoft Windows 2000, Windows XP, Windows   Vista and  Windows 7  
						

							Performance    
Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If required, the 
user can select different settings, but in most cases monitor installation is automatic.  
LCD monitor Quality and Pixel Policy  
 
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and 
do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at:  support.dell.com .   
Maintenance Guidelines    
Caring for Your Monitor  
F o r best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:  
l To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen - cleaning tissue or solution suitable for the 
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.   
l Use a lightly -  
l Handle your monitor with care as dark - colored monitors may scratch and show white scuff marks more than lighter -  
Back to Contents Page  
 Transfer Speed  
Read: 480 Mb/s (max.)
Write: 480 Mb/s (max.)  
  WARNING:   Read and follow the  Safety Instructions  
  WARNING:   Before cleaning the monitor, unplug the monitor from the electrical 
outlet.    
						

							Back to Contents Page    
Appendix  
 
Safety Instructions  
FCC Notice (U.S. Only) and Other Regulatory Information  
Contacting Dell  
 
WARNING: Safety Instructions  
For information on safety instructions, see the  Safety Information .  
FCC Notice (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at  www.dell.com
egulatory_compliance .  
Contacting Dell  
  To contact Dell electronically, you can access the following websites and by phone: 
l For support through the web, go to  support.dell.com .   
l For customers in the United States, call 800 - WWW - DELL (800 - 999 - 3355).   
Dell provides several online and telephone - based support and service options. Availability varies by country and product, and some services may not be 
available in your area. To contact Dell for sales, technical support, or customer service issues:  
1. Visit  support.dell.com .   
2. Verify your country or region in the  Choose A Country/Region  drop - down menu at the bottom of the page.   
3. Click  Contact Us  on the left side of the page.   
4. Select the appropriate service or support link based on your need.   
5. Choose the method of contacting Dell that is convenient for you.   
Back to Contents Page  WARNING:  Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, 
electrical hazards, and/or mechanical hazards. 
  NOTE:  If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product 
catalog.    
						

							Back to Contents Page    
Setting Up Your Monitor   
 
If you have a Dell  desktop or a Dell  portable computer with internet access  
1.  Go to   http://support.dell.com ,    
2.  After installing the drivers for your Graphics Adapter, attempt to set the resolution to   1920 x 1200  again.  
 
Back to Contents Page  NOTE:  If you are unable to set the resolution to  1920 x 1200,  please contact Dell  
						

							Back to Contents Page    
Setting Up Your Monitor   
 
If you have non Dell  desktop, portable computer, or graphic card  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3.  Select   Advanced .  
4.  Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5.  Please refer to the graphic card provider website for updated driver (for example,   http://www.ATI.com  OR   http://www.NVIDIA.com  ).  
6.  After installing the drivers for your Graphics Adapter, attempt to set the resolution to   1920 x 1200  again.  
 
Back to Contents Page    NOTE:  If you are unable to set the resolution to  1920 x 1200, please contact the manufacturer of your computer or consider purchasing a graphics 
   
						

							Back to Contents Page    
Operating the Monitor   
 
Using the Front Panel Controls  
Using the On - Screen Display (OSD) Menu  
Setting the Maximum Resolution  
Using the Dell Soundbar (Optional)  
Using the Tilt, Swivel and Vertical Extension  
Rotating the monitor  
Adjusting the Rotation Display Settings of Your System  
 
Using the Front Panel  
Use the buttons on the front of the monitor to adjust the image settings. 1~5 are capacitive touch sensor keys, activated by placing the finger on the Blue LED 
button.  
   
1 - 3 Shortcut keys   Use this key for direct access to the control menu that you define in the personalize menu.   
For example,  use the second shortcut key  to activate Brightness/Contrast adjustment.    
 
* The default settings are Preset Modes Select, Brightness/Contrast Select and  Input Source  Select .  
1
 
Preset Modes Select   Use this button to select different image modes on your monitor. 
2
 
Brightness/Contrast   Use this button for direct access to the Brightness/Contrast control menu.
3
 
Input Source Select   Use Input Source Select button to select between different video signals that may be connected to your monitor. 
l VGA input   
l DVI - D 1 input   
l DVI - D 2 input   
l DisplayPort input      
						

							l HDMI input    
l Component video input    
l Composite video input   
Displays the source selection bar. Touch   and   buttons   to move between the setting options  and Touch    to select the input 
source you want.  
 
If VGA or DVI - D or DisplayPort or HDMI input is selected and all VGA and DVI - D and DisplayPort and HDMI cables are not connected, a 
floating dialog box as shown below appears.   
or   
   
 
If either Composite, or Component input is selected and the cables are not connected or the video source is turned off, the screen does 
not have an image. If any button is Touched (except power button), the monitor displays the following message:  or
or 
or  
4
 
OSD Menu   Use this key to open the on - screen display (OSD). See  Using the OSD Menu .