Dell U2410f Manual

The Dell Soundbar is a stereo two channel system adaptable to mount on Dell flat panel displays. The Soundbar has a rotary volume and on/off control to 
adjust the overall system level, a blue LED for power indication, and two audio headset jacks.  
 
 
Using the Tilt, Swivel and Vertical Extension  
 
Tilt/Swivel  
With the built - in pedestal, you can tilt and/or swivel the monitor for the most comfortable viewing angle.  
 
Vertical Extension    1 Attach Mechanism 
2 Headphone Jacks 
3 Power Indicator...

Stand extends vertically up to 100 mm  +  
 
Rotating the Monitor   
Before you rotate the monitor, your monitor should be fully vertically extended ( Vertical Extension ) and fully tilted ( Tilt ) up to avoid hitting the bottom edge of 
the monitor.  
 
   

 
Adjusting the Rotation Display Settings of Your System  
After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of Your System.  
To adjust the Rotation Display Settings:  
1. Right - click on the desktop and click  Properties .   
2. Select the  Settings  tab and click  Advanced .   
3. If you have an ATI graphics card, select the  Rotation  tab and set the preferred rotation.  
nVidia  tab, in the left - hand column select  NVRotate , and...

Back to Contents Page   
Setting Up Your Monitor   
 
Important instructions to set the display resolution to 1920 x 1200 (Maximum)  
For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1920 x 1200 pixels by performing the 
following steps:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Move the slider - bar to the right by pressing and holding left - mouse button and adjust the screen...

 
 
 
Information in this document is subject to change without notice.  
2009 -  
Reproduction of these materails in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  Dell , the  DELL  logo, are trademarks of Dell Inc;  Microsoft  and  Windows  either registered trademarks or trademarks of Microsoft Corporation in the 
Adobe  is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions.  
Other...

Back to Contents Page    
 
Setting Up the Monitor   
Users Guide    
Attaching the Stand  
  Connecting the Monitor  
Organizing Your Cables  
Attaching the Soundbar (optional)    
Attaching the Stand  
 
 
To attach the monitor stand:  
1. Remove the cover and place the monitor on it.   
2. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.   
3. Press the stand till it snaps into its place.   
Connecting Your Monitor  
To connect your monitor to the computer...

 
Connecting the Blue VGA Cable and USB uplink cable   
 
 
Connecting the Black DisplayPort Cable and USB uplink cable   
 
After you have completed connecting the DVI/VGA /DisplayPort  cable, follow the procedure below to complete  setting up your monitor:  
l    
l Turn on the monitor and the computer. Then change the input souce via the OSD Menu  Input Source Select  from VGA or DVI input to DisplayPort input.    
If your monitor displays an image, installation is complete. If it does not display an...

Attaching the Soundbar (Optional)  
 
Back to Contents Page    1 Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2 Slide the Soundbar to the left until it snaps into place.
3 Connect the  S oundbar with the DC power connector.
4 Insert the mini stereo plug from the rear of the Soundbar into the computers audio output jack.
CAUTION :   Do not use with any device other than Dell Soundbar
NOTE:   Monitor DC power...

Back to Contents Page    
Solving Problems    
 
Monitor Specific Troubleshooting   
- in Diagnostics  
Common Problems  
Video Problems  
Product Specific Problems  
Universal Serial Bus (USB) Specific Problems  
 
Card Reader Troubleshooting  
 
Troubleshooting Your Monitor  
Self - Test Feature Check (STFC)  
Your monitor provides a self - test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly 
connected but the monitor screen...

 
4. Carefully inspect the screen for abnormalities.   
5. Press the  fourth  button on the front panel   again. The color of the screen changes to red.   
6. Inspect the display for any abnormalities.   
7. Repeat steps 5 and 6 to inspect the display in green, blue, and white colored screens.   
The test is complete when the white screen appears. To exit, press the  fourth  
If you do not detect any screen abnormalities upon using the built - in diagnostic tool, the monitor is functioning properly....