Dell U2410f Manual

 
Notes,  Caution s, and  Warning s  
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, notices, and cautions, 
and they are used as follows:  
Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the caution is mandated by 
regulatory authority.  
Information in this document is subject to change without notice.  
2009 -  
Reproduction of these...

Back to Contents Page    
 
 
Package Contents  
Product Features  
Identifying Parts and Controls  
Monitor Specifications  
Universal Serial Bus (USB) Interface  
Card Reader Specifications  
Plug and Play Capability  
LCD monitor Quality and Pixel Policy  
Maintenance Guidelines  
 
 
Package Contents    
Your monitor ships with the components shown below. Ensure that you have received all the components and  contact Dell  if something is missing.  
 
  NOTE:  Some items may be optional and may not...

 
Product Features  
The  U2410 - film transistor (TFT), liquid crystal display (LCD). The monitor features include:   
■  24 - inch ( 518.4 mm x 324 mm) viewable area display measured diagonally.   
■  1920 x 1200 resolution, plus full - screen support for lower resolutions.   
■  Wide viewing angle to allow viewing from a sitting or standing position, or moving side - to - side.   
■  Tilt, swivel, rotation and height adjustment capabilities.   
■  Removable pedestal and Video Electronics Standards...

     
Back View  
 
 Front View Control Panel
Label Description
1 - 3 Shortcut keys 
*The default settings are  Preset Modes  Select , Brightness/Contrast 
Select  and  Input Source  Select .  
1   Preset Modes Select
2   Brightness/Contrast Select
3   Input Source Select
4   OSD  M enu  S elect 
5   E xit
6   Power B utton (with power light indicator)
NOTE: 1~5 buttons are capacitive touch buttons, which are activated by placing your finger on the blue LED.     

 
 
 
 
   
Side View   Label Description/Use
1 VESA Mounting Holes (100mm)  
(Behind attached VESA Plate)   T o mount the monitor.  
2  Connectors Label To indicate the positions and types of 
connectors.
3 Security Lock Slot T o help secure your monitor.
4 Dell Soundbar Mounting Brackets To attach the optional Dell Soundbar.
5 Barcode Serial Number Label T o contact Dell for technical support.
6 Regulatory Rating  Label   Lists the regulatory approvals.
7 Cable Management Slot T o organize cables by...

Bottom View  
 
 
 
  Bottom View   Left View 
Label Description
1 Card Reader. See  Card Reader Specifications    
2 USB Down Stream Ports
Label Description
1   AC Power Cord Connector  
2  

   
Monitor Specifications  
The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.  
Power Management Modes  
If you have VESAs DPMS compliance display card or software installed in your computer, the monitor automatically reduces its power consumption when not in 
use. This is referred to as Power Save Mode. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will...

 
 
Composite  V ideo Connector  7   GND - G  
8   GND - B  
9   Computer 5V/3.3V  
10   GND - sync  
11   GND  
12   DDC data  
13   H - sync  
14   V - sync  
15   DDC clock  
Pin Number   24 - pin Side of the Connected Signal Cable  
1 TMDS RX2 -
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating
9 TMDS RX1 -
10 TMDS RX1+
11 TMDS Ground
12 Floating
13 Floating
14 +5V/+3.3V power  
15
16 Hot Plug Detect
17 TMDS RX0 -
18 TMDS RX0+
19 TMDS Ground
20 Floating
21 Floating
22...

 
Luma composite chroma  
 
Component  Video Connector  
 
 
DisplayPort Connector  
 
  Pin Number 3 - pin Side of the C onnected  Signal Cable (Cable not 
included)
1 Y (Luminance signal)
2 Pb (Color differential signal)
3 Pr (Color differential signal)
Pin 
Number   20 - pin Side of the Connected Signal 
Cable  
1 ML0(p)
2 GND
3 ML0(n)
4 ML1(p)
5 GND
6 ML1(n)
7 ML2(p)
8 GND
9 ML2(n)
10 ML3(p)
11 GND
12 ML3(n)
13 GND
14 GND 
15 AUX(p)
16 GND
17 AUX(n)
18 HPD
19 Re - PWR
20 PWR  

 
HDMI Connector  
 
  Pin 
Number   19 - pin Side of the Connected Signal 
Cable  
1 TMDS DATA 2+
2 TMDS DATA 2 SHIELD
3 TMDS DATA 2 -
4 TMDS DATA 1+ 
5 TMDS DATA 1 SHIELD
6 TMDS DATA 1 -
7 TMDS DATA 0+
8 TMDS DATA 0 SHIELD
9 TMDS DATA 0 -
10 TMDS CLOCK
11 TMDS CLOCK SHIELD
12 TMDS CLOCK -  
13 Floating
14 Floating  
15 DDC CLOCK (SDA)
16 DDC DATA (SDA)
17 GROUND
18 +5V POWER
19 HOT PLUG DETECT
Flat Panel  Specifications    
Screen type   Active matrix  -  TFT LCD  
Panel type IPS
Screen dimensions   24...