Dell S300w Projector Users Guide

Using Your Projector61
Download the Wireless Application Software
See also Wireless Networking Installation on page 52.
Click the Download button of the corresponding operating system of your 
computer. 

62Using Your Projector
Conference Control
This allows you to host conference presentations from different sources without 
using projector cables and lets you control how each presentation will appear on 
screen.
Computer Name: Lists the computers logged for conference control.
Play Control: Click the buttons to control how each computer’s projection will 
appear on screen.
•  Full screen projection — The presentation from the computer 
occupies the whole screen.
•  Split 1 - The presenation from the...

Using Your Projector63
Managing Properties
Admin
An administrator password is required to access the Admin page. 
•Admin Password: Enter the administrator password then click Login. The 
default password is admin. To change the password, see Change 
Passwords on page 68. 

64Using Your Projector
System Status
Displays the Network Status, Connection Status, and Projector Status 
information. 

Using Your Projector65
Network Status
See OSD section on page 43.
IP Setup
• Choose Obtain an IP address automatically to assign an IP address to the 
projector automatically, or Use the following IP address to assign an IP 
address manually.
DHCP Server Setup
• Choose Auto to automatically setup the Start IP, End IP, Subnet Mask, 
Default Gateway, and DNS Server address from a DHCP server, or Disable 
to disable this function.
Wireless Setup
• Choose Enable to setup the Region, SSID, SSID Broadcast,...

66Using Your Projector
SSID: Up to maximum length of 32 characters.
WEP: You can Disable WEP key or select one of 64-bit or 128-bit in ASCII 
or HEX string.
Key: If WEP is enabled, you have to set key value according to WEP mode 
you selected.
RADIUS Server Setup
• Setup the IP address, Port and Key information.
GateKeeper
• There are 3 options: 
All Pass: Allow users to access office network via wireless projector.
All Block: Block users to access all office network via wireless projector.
Internet...

Using Your Projector67
Projection Setup
Projection Setup
•Resolution: Allows you to select the resolution. Options are: XGA 
(1024 x 768) and WXGA (1280 x 800).
•Color Depth: Allows you to select the color depth for more vivid 
presentations. Options are: Normal (16 bit) and High (32 bit).
•Login Code: Select how you want the login code to be generated by the 
projector. There are 3 options: 
•Disable: Login code will not be required when logging in to the system.
•
Random: Default is Random. Login code...

68Using Your Projector
Change Passwords
This page allows you to change the administrator password.
•Enter New Password: Enter the new password.
•Confirm New Password: Enter the password again and click Apply.
 
NOTE: Contact Dell if you forget your administrator password. 

Using Your Projector69
Reset to Default
Click the Apply button to restore all wireless/network setup to its factory default 
settings. 

70Using Your Projector
Firmware Update
Use the Firmware Update page to update your projector’s firmware.
To start firmware update, do the following steps:
1
Press Browse to select the file to update.
2Click the Update button to start. Wait while the system updates the firmware 
in your device.
 CAUTION: Do not interrupt the update process, this may cause the system to 
crash!
3
Click OK when update is complete.