Dell S300w Projector Users Guide

Using Your Projector41
LAMP
Using the Lamp menu, you can adjust the display settings of your projector. The 
Lamp menu provides the following options:
L
AMP HOUR—Displays the operating hours since the last lamp timer reset.
L
AMP HOUR RESET—Select Ye s to reset the lamp timer.
SET UP
The Set Up menu allows you to adjust settings for Language, Projector Mode, 
Keystone, Alert Volume, Standby VGA Output, 3D Display and Wireless / 
Network. 

42Using Your Projector
LANGUAGE—Allows you to set the language for the OSD. Press   to activate the 
Language menu.
P
ROJECTOR MODE—Allows you to select the projector mode, depending upon how 
the projector is mounted.
•  Front Projection-Desktop — This is the default option.
•  Front Projection-Ceiling Mount — The projector turns the image upside 
down for ceiling-mounted projection.
•  Rear Projection-Desktop — The projector reverses the image so that you can 
project from behind a translucent screen....

Using Your Projector43
NOTE: To activate 3D Display function, ensure that 3D goggles, 3D video
contents and 60Hz/120Hz signal output graphic card supported on PC/NB are ready.
3D Sync Invert—
If you see a discrete or overlapping image while 
wearing DLP 3D goggles, you may need to execute Invert to get 
best match of left/right image sequence to get the correct image. 
(For DLP 3D goggles)
Wireless / Network—Select On to activate wireless / network function. Press   
to configure the Wireless / Network...

44Using Your Projector
SUBNET MASK—Configure the Subnet Mask of the network connection.
G
ATEWAY—Check the Gateway address with your network/system administrator if 
you configure it manually.
DNS—Check the DNS Server IP address with your network/system administrator 
if you configure it manually.
S
TORE—Press   to save the changes made in network configuration settings.
 
NOTE: 
1Use   and   button to select IP Address, Subnet Mask, Gateway, DNS and 
Store.
2Press the   button to enter IP Address,...

Using Your Projector45
OTHERS
The Others menu allows you to change settings for Menu, Screen, Audio, Power, 
Security, and Closed Caption (for NTSC only). You can also perform Test Pattern 
and Factory Reset.
MENU SETTINGS—Select and press   to activate menu settings. The menu 
settings consists of the following options:
MENU POSITION—Allows you to change the position of the OSD menu on 
the screen.
MENU TRANSPARENCY—Select to change the transparency level of the OSD 
background.
MENU TIMEOUT—Allows you...

46Using Your Projector
SCREEN SETTINGS—Select and press   to activate screen settings. The screen 
settings menu consists of the following options:
CAPTURE SCREEN—Select and press   to capture the screen display, the 
following message appears on the screen.
 
NOTE: To capture a full image, ensure the input signal that is 
connected to the projector is 1024 x 768 resolution.
SCREEN—Select Dell to use the Dell logo as wallpaper. Select Captured to 
set the captured image as wallpaper.
RESET—Select and...

Using Your Projector47
POWER SETTINGS—Select and press   to activate power settings. The power 
settings menu consists of the following options:
POWER SAVING—Select Off to disable Power Saving mode. By default, the 
projector is set to enter power saving mode after 120 minutes of no activity. 
A warning message appears on screen showing a 60-second countdown 
before switching to power saving mode. Press any key buttons during 
countdown period to stop power saving mode.
You can also set a different delay...

48Using Your Projector
PASSWORD—When Password Protect is enabled, a Password Protect screen 
requesting you to enter a password will be displayed when the power plug is 
inserted into the electrical outlet and the power for the projector is first 
turned on. By default, this function is disabled. You can enable this feature, 
by selecting Enabled. If the password has been set before, key in the 
password first and select the function. This password security feature will 
be activated the next time you...

Using Your Projector49
2If you have entered an incorrect password, you will be given 
another 2 chances. After the three invalid attempts, the projector 
will automatically turn off.
 NOTE: If you forget your password, contact DELL™ or a qualified 
service personnel.
3
To disable the password function, select Off to disable the 
function.
4To delete the password, select Delete. 

50Using Your Projector
CHANGE PASSWORD—Key in the original password, then enter the new 
password and confirm the new password again.
CLOSED CAPTION—Select On to enable close caption and activate the closed 
caption menu. Select an appropriate closed captions option: CC1, CC2, CC3, and 
CC4.