Dell S300w Projector Users Guide

Using Your Projector51
 NOTE: Closed caption option is available for NTSC only.
TEST PATTERN—Test Pattern is used to test focus and resolution.
You can enable or disable the Te s t  Pa t t e r n by selecting Off, 1 or 2. You can also 
invoke the Te s t  Pa t t e r n  1 by pressing and holding down   and   buttons on the 
control panel simultaneously for 2 seconds. You can also invoke the test pattern 2 
by pressing and holding down   and   buttons on the control panel 
simultaneously for 2 seconds....

52Using Your Projector
Wireless Networking Installation
 NOTE: Your computer must have the following minimum system requirements:
Operating System:
•Windows
Microsoft Windows 2000 with service pack 4 or later, Windows XP Home or 
Professional Service pack 2 32-bit(recommended), Windows Vista 32-bit, and 
Windows 7 Home or Professional 32-bit or 64-bit
•MAC 
MacBook and above, MacOS 10.5 and above
Minimum Hardware:
aIntel Pentium III-800 MHZ (or greater) 
b256MB of RAM required, 512 MB or more...

Using Your Projector53
In order to use your projector wirelessly, you need to complete the steps below:
1
Install the wireless antenna. See Installing the Antenna on page 10.
2Enable wireless connection on the projector. See WIRELESS / NETWORK 
on page 43.
3Set the Input Select menu then select the Multiple Display to Wireless display. 
See INPUT SELECT on page 35. The 
Wireless Guide Screen shown below 
appears:.
4Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP 
ADDRESS
. You will need these...

54Using Your Projector
 NOTE: 
• Your computer must have wireless network function to detect the 
connection.
• When you connect to the 
S300w network, you will lose wireless connectivity 
with other wireless networks.
6Open your internet browser. You will be automatically directed to the S300w 
We b  M a n a g e m e n t
 web page.
 NOTE: If the web page does not load automatically, enter the IP address noted 
from the projector’s screen in the browser’s address bar.
7
The S300w Web Management page...

Using Your Projector55
8Select the appropriate operating system, then click Download.
9Click Run to proceed with the 
one-time installation of the 
software.
 NOTE: You may choose to 
save the file and install it at 
latter time. To do this, click 
Save.
 
NOTE: The following warning messages may appear, select Run and Allow 
respectively. 

56Using Your Projector
10The installation software will launch. Follow the on-screen instructions to 
complete setup.
S300w Wireless Application Software
Once the installation is complete, S300w Wireless Application software will 
launch and will search for the projector automatically. The screen below appears.
Login
To communicate with your projector, enter the Login Code provided for in Step 4 
of Wireless Networking Installation, then click OK.
 
NOTE: If IP Address is not detected, enter the IP...

Using Your Projector57
Understanding the Buttons
After a successful login, the following screen appears.
Projecting the Presentation
• To project the presenation, click any of the projection buttons  .
• To pause the presentation, click  . The icon turns green.
• To continue the presentation, click   again.
• To stop the presentation, click  .
Item Description
1Status BarDisplays IP and LOGIN CODE information.
Menu  Click to activate the application menu.
Minimize button Click to minimize the...

58Using Your Projector
 NOTE: The following information is for wireless data presentation mode only. 
Image display could be slow or not displayed smoothly if displaying a video clip 
or animation, refer to the frame rate table below for reference.
Frame Rate of Wireless Presentation
 NOTE: 
1The percentage of screen variation is based on 1024 x 768.  Example, display a 320 
x 240 video clip on 1024 x 768 desktop, the screen variation is 9.8%.
2Actuate frame rate could be different depending on factors,...

Using Your Projector59
SEARCH FOR PROJECTOR—Click to search and connect to wireless projector..
MAKE APPLICATION TOKEN—Click to make application token. See Make 
Application Token on page 79.
INFO—Click to display system information.
ABOUT—Click to display the application version.
EXIT—Click to close the application. 

60Using Your Projector
Managing the Projector From Web 
Management
Configuring the Network Setting
If the projector is connected to a network, you can access the projector using a web 
browser. For configuring the network setting, refer to WIRELESS / NETWORK 
on page 43.
Accessing Web Management
Use Internet Explorer 5.0 and above or Firefox 1.5 and above and enter the IP 
address. You can now access Web Management and manage the projector from a 
remote location.
Home Page
• Access the Web Management...