Dell P2011h Users Guide

   
    AUTO ADJUST   Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use 
with your particular setup. 
Auto Adjustment allows the monitor to self - adjust to the incoming video signal. After using Auto Adjustment, you can further tune 
your monitor by using the Pixel Clock and Phase controls under Displays Settings.  
The following dialog appears on a black screen as the monitor automatically adjusts to the current input:...

INPUT SOURCE    Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor.
  
 
 
Auto S elect Select Auto Select to scan for available input signals.
VGA  
Select VGA input when you are using the analog (VGA) connector. Press   to select the VGA input source.
DVI - D
Select DVI - D input when you are using the Digital (DVI) connector. Press   to select the DVI input source.
Color Settings
Use the Color Settings to adjust the color setting mode and color...

When you select  Video , you can choose  Movie, Game, Sports,  or  Nature :  
l Movie : Loads color settings ideal for movies. This is the default preset mode.   
l Game : Loads color settings ideal for games.   
l Sports : Loads color settings ideal for sports.   
l Nature : Loads color settings ideal for nature.       
 
   
 
Hue  
This feature can shift color of video image to green or purple. This is used to adjust the desired flesh tone color. Use   or 
adjust the hue from 0 to 100 .
Press   to...

 
Display Setting submenu for DVI - D input    
 
 
  
Wide Mode    Adjust the image ratio as 4:3 or full screen.
  
Horizontal Position  
Use the   and   buttons to adjust image left and right. Minimum is 0 ( - ). Maximum is 100 (+).  
NOTE:   When using a DVI source, the Horizontal Position setting is not available.  
  
Vertical Position  
Use the   and   buttons to adjust image up and down. Minimum is 0 ( - ). Maximum is 100 (+).  
NOTE:   When using a DVI source, the Vertical Position setting is not...

Back to Contents Page   
Setting Up Your Monitor   
 
Setting the display resolution to 1600 X 900 (maximum)  
For maximum display performance while using the Microsoft Windows operating systems, set the display resolution to 1600 X 900 pixels by performing the 
following steps:  
In Windows XP:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Move the slider - bar to the right by pressing and holding the left - mouse button and adjust the screen resolution...

 
Information in this document is subject to change without notice.  
 
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  Dell  and the  DELL  logo are trademarks of Dell Inc;   Microsoft  and  Windows  are either trademarks or registered trademarks of Microsoft Corporation in 
the United States and/or other countries ,  Intel  is a registered trademark of Intel Corporation in the U.S. and other...

Back to Contents Page    
 
Setting Up the Monitor   
 
   Attaching the Stand  
   Connecting the Monitor  
   Organizing the Cables  
   Attaching the Soundbar (Optional)  
   Removing the Stand    
   Wall Mounting (Optional)    
Attaching the Stand  
To attach the monitor stand:  
1. Remove the cover and place the monitor on it.   
2. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.   
3. Press the stand till it snaps into its place.   
Connecting Your Monitor...