Dell P2011h Users Guide

Back to Contents Page    
 
Appendix   
 
  Safety Instructions  
  FCC Notice (U.S. Only) and Other Regulatory Information   
  Contacting Dell  
   
WARNING: Safety Instructions  
For information on safety instructions, see the  Product Information Guide .   
FCC Notices (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at: http://www.dell.com/regulatory_compliance.  
Contacting Dell  
For customers in the...

Back to Contents Page    
Help on PowerNap Installation  
To install PowerNap succesfully, follow these steps: -  
Back to Contents Page   Windows XP, Windows Vista ®
,  Windows ®
  7
2. Install Entech API   Install
Install  

Back to Contents Page    
Setting Up Your Monitor   
 
 
1. Go to  http://support.dell.com ,  enter your service tag, and download the latest driver for your graphics card.   
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to  1600 X 900  again.  
Back to Contents Page  NOTE:  If you are unable to set the resolution to 1600 x 900, please contact Dell™ to inquire about a Graphics Adapter that supports these resolutions.    

Back to Contents Page    
Setting Up Your Monitor   
 
 
In Windows XP:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Select  Advanced .  
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5. Refer to the graphic card provider website for updated driver (for example,  http://www.ATI.com  OR  http://www.NVIDIA.com  ).  
6. After installing the drivers for your Graphics Adapter,...

Back to Contents Page    
 
Operating the Monitor   
 
   Using the Front Panel Controls  
   Using the On - Screen Display (OSD) Menu  
   PowerNap Software  
   Setting the Maximum Resolution  
   Using the Dell Soundbar (Optional)  
   Using the Tilt, Swivel, and Vertical Extension  
   Rotating the monitor  
   Adjusting the Rotation Display Settings of Your System  
Using the Front Panel Controls  
Use the control buttons on the front of the monitor to adjust the characteristics of the image being...

Using the On - Screen Display (OSD) Menu  
 
Accessing the Menu System  
Main Menu for Analog (VGA) Input  
 
or  
Main Menu for Digital (DVI - D) Input  
 
    5
 
 
Power   
indicator)   Use the Power button to turn the monitor on and off.  
The  Blue  LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power 
save mode.   
NOTE:   If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The...

Brightness / Contrast   Use t his menu to activate Brightness/Contrast adjustment.
 
 
Brightness   Brightness adjusts the luminance of the backlight.   
Press the   button to increase brightness and Press the   button to decrease brightness (min 0 ~ max 100).   
   
NOTE: Brightness control will be greyed out during Screen dim in PowerNap option when screen saver is activated.
 
Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.  
Press the   button to...