Dell P2010h Users Guide

Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor 
installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see  Operating the Monitor .  
Universal...

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and 
do not affect the display quality or usability.For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at:  support.dell.com .  
Maintenance Guidelines  
Cleaning Your Monitor  
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:  
l To clean your antistatic...

Back to Contents Page    
 
Appendix   
 
   Safety Instructions  
   FCC Notice (U.S. Only) and Other Regulatory Information   
   Contacting Dell  
   
WARNING: Safety Instructions  
For information on safety instructions, see the  Product Information Guide .   
FCC Notices (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at  www.dell.com
egulatory_compliance .  
Contacting Dell  
For customers in the United...

Back to Contents Page    
Setting Up Your Monitor   
 
 
1. Go to  http://support.dell.com ,  enter your service tag, and download the latest driver for your graphics card.   
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to  1600x900  again.  
Back to Contents Page  NOTE:  If you are unable to set the resolution to 1600x900, please contact Dell™ to inquire about a Graphics Adapter that supports these resolutions.    

Back to Contents Page    
Setting Up Your Monitor   
 
 
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Select  Advanced .  
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5. Refer to the graphic card provider website for updated driver (for example,  http://www.ATI.com  OR  http://www.NVIDIA.com  ).  
6. After installing the drivers for your Graphics Adapter, attempt to set the...

Back to Contents Page    
 
Operating the Monitor   
 
   Using the Front Panel Controls  
   Using the On - Screen Display (OSD) Menu  
   Setting the Maximum Resolution  
   Using the Dell Soundbar (Optional)  
   Using the Tilt, Swivel, and Vertical Extension  
   Rotating the monitor  
   Adjusting the Rotation Display Settings of Your System  
Using the Front Panel  
Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these...

Using the On - Screen Display (OSD) Menu  
 
Accessing the Menu System  
1.  Push the   button to launch the OSD menu and display the main menu.   
Main Menu for analog (VGA) Input    
 
or  
Main Menu for digital (DVI) Input  
 
or  
Main Menu for display (DP) Input  5  
 
Power   
indicator)   Use the Power button to turn the monitor on and off.  
The  Blue  LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.  
   
  NOTE:   If you change the settings and...

 
2.   Push the   and  buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the 
following table for a complete list of all the options available for the monitor.    
3.   Push the   button once to activate the highlighted option.   
4.   Push   and   button to select the desired parameter.   
5.   Push   to enter the slide bar and then use the     and   buttons,  according to the indicators on the menu, to make your changes.    
6....

    
  NOTE:  In most cases, Auto Adjust produces the best image for your configuration.  
NOTE:   Auto Adjust  option is only available when you are using the analog (VGA) connector.  
  Input Source   Use the  Input Source  menu to select between different video signals that may be connected to your monitor.
 
 
Auto S elect
Push    to select the  Auto source , the monitor will Auto detc the analog siganl. 
VGA  
Select  VGA input  when you are using the analog (VGA) connector. Push    to select the...

l Cool : Decreases the color temperature. The screen appears cooler with a blue tint.   
l Custom (RGB) : Allows you to manually adjust the color settings. Press the and buttons to adjust the three colors (R, G, B) 
values and create your own preset color mode.   
 
When you select  Video , you can choose  Movie, Game, Sports,  or  Nature  preset:  
l Movie : Loads color settings ideal for movies. This is the default preset mode.   
l Game : Loads color settings ideal for game.   
l Sports : Loads color...