Dell P2010h Users Guide

 
Notes, Notices, and Cautions  
 
Information in this document is subject to change without notice.  
   
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.  
Trademarks used in this text:  Dell  and the  DELL  logo are trademarks of Dell Inc;   Microsoft  and  Windows  are either trademarks or registered trademarks of Microsoft Corporation in 
the United States and/or other countries.ENERGY STAR is a registered trademark of the...

Back to Contents Page    
   
About Your Monitor   
 
Package Contents    
Your monitor ships with the components shown below. Ensure that you have received all the components and  contact Dell  if something is missing.  Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Plug and Play Capability
Universal Serial Bus (USB) Interface
LCD Monitor Quality and Pixel Policy
Maintenance Guidelines
  NOTE:  Some items may be optional and may not ship with your Monitor. Some...

   
Product Features  
The  P2010H  flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include:   
■  20 - inch (508 mm) viewable area display (Measured diagonally) .   
■  1600 x 900  resolution, plus full - screen support for lower resolutions.   
■  Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side - to - side.   
■  Tilt, swivel, vertical extension and rotate adjustment capability....

   
Back View  
     
Front View   Front panel controls    
Label   Description  
1   Preset Modes (default, but configurable)
2   Brightness & Contrast (default, but configurable)
3   Menu
4   Exit
5   Power (with power light indicator)
Back view Back view with monitor stand
Label   Description   Use  
1   VESA mounting holes   (100 mm x 100 mm  -  
behind attached base plate) Wall mount monitor using VESA compatible wall mount kit (100 mm x 100 mm)   
2   Stand removal button    Release stand from...

Label  Card View  
 
Side View    NOTE:  Monitor shipped with label card fully inserted in USB compartment. Pull out the label card to access the barcode serial number label and regulatory rating label.
Back View with label card pulled out   
Front View with label card pulled out   
Label   Description   Use  
1   Regulatory label  Lists the regulatory approvals.
2   Barcode serial number label T o contact Dell for technical support.
   

   
Bottom View    
   
Monitor Specifications  
Flat Panel Specifications    
Left view   R ight view  
Label Description Use
1 USB downstream ports Connect your USB devices.
2 Label card  Provide  clean monitor back view when reference to labels is not required. 
Bottom view    Bottom view with monitor stand  
Label Description   Use  
1 AC power cord connector Connect the power cable 
2 DC power  connector  for Dell Soundbar. Connect the power cord for the soundbar (optional)
3 DisplayPort connector...

*[P2010H] color gamut (typical) is based on CIE1976 ( 83% ) and CIE1931 (72%) test standards.   
Resolution  Specifications  
Supported Video Modes  
Preset Display Modes  
Electrical  Specifications  
Physical  Characteristics  Screen dimensions 20 inches (20 - inch viewable image size)
Preset display area: 442.8(H) X 249.1(V)
Horizontal 442.8(H) mm (17.4 inches)
Vertical 249.1(V) mm (9.8 inches)
Pixel pitch 0.277 mm
Viewing angle 160° (verticalyfW\SLFDO

Environmental  Characteristics  
Power Management Modes  
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in 
use. This is referred to as  Power Save Mode *. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes 
functioning. The following table shows the power consumption and signaling of this automatic power saving feature:   
The OSD will...

 
Activate the computer and the monitor to gain access to the  OSD.  
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.  
Pin Assignments  
VGA Connector  
 
 
  
   
  NOTE:  This monitor is  ENERGY STAR ®
- compliant as well as TCO 03 power management compatible.  
Pin 
Number 15 - pin Side of the Co nnected Signal Cable
1   Video - Red  
2   Video - Green
3   Video - Blue
4   GND
5   Self - test
6   GND - R
7   GND - G
8   GND - B
9   Computer...

DisplayPort Connector  
 Pin 
Number 24 - pin Side of th e C o nnected  Signal Cable
1   TMDS RX2 -
2   TMDS RX2+
3   TMDS Ground
4   Floating
5   Floating
6   DDC Clock
7   DDC Data
8   Floating
9   TMDS RX1 -
10   TMDS RX1+
11   TMDS Ground
12   Floating
13   Floating
14   +5V/+3.3V power
15   Self test 
16   Hot Plug Detect
17   TMDS RX0 -
18   TMDS RX0+
19   TMDS Ground
20   Floating
21   Floating
22   TMDS Ground
23   TMDS Clock+
24   TMDS Clock -
Pin 
Number 20 - pin Side of the Connected Signal...