Dell M6500 Service Manual

							5.  Pull the FCM  card  away  from  the computer.
Replacing the FCM Card
To replace the FCM  card, perform  the above  steps in reverse  order.
Back to  Contents Page 
						

							Back to  Contents Page
Memory
Dell  Precision™ Workstation M6500  Service Manual
WARNING: Before  working  inside  your computer, read  the safety information that shipped with your
computer. For  additional  safety best practices  information,  see  the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
Removing the Memory Module(s)
NOTE:  You  may need  to  install Adobe® Flash®  Player  from   Adobe.com in order  to  view  the illustrations below.
1 .  Follow the procedures in  Before  Working Inside Your  Computer
.
2 .  To remove the memory modules A  and  B, remove the  battery
 and  the access  panel.
To remove the memory modules C  and  D, remove the  battery
, hinge  cover,  and   keyboard.
3 .  Carefully  spread apart the securing clips on each  end  of the memory module connector  until the memory module pops
up. 
						

							4.  Remove the memory module from  the connector.
Replacing the Memory Module(s)
To replace the memory module(s), perform  the above  steps in reverse  order.
Back to  Contents Page 
						

							Back to  Contents Page
Camera
Dell  Precision™ Workstation M6500  Service Manual
WARNING: Before  working  inside  your computer, read  the safety information that shipped with your
computer. For  additional  safety best practices  information,  see  the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
Removing the Camera
NOTE:  You  may need  to  install Adobe® Flash®  Player  from   Adobe.com in order  to  view  the illustrations below.
1 .  Follow the procedures in  Before  Working Inside Your  Computer
.
2 .  Remove the  battery
.
3 .  Remove the  access  panel
.
4 .  Remove the  hinge  cover
.
5 .  Remove the  keyboard
.
6 .  Remove the  display  assembly
.
7 .  Remove the  display  bezel
.
8 .  Remove the  display  panel
.
9 .  Disconnect the camera cable  from  the camera. 
						

							10. Remove the screws that  secure the camera to  the display  assembly.
11 . Remove the camera from  the display  assembly. 
						

							Replacing the Camera
To replace the camera, perform  the above  steps in reverse  order.
Back to  Contents Page 
						

							Back to  Contents Page
PCMCIA Card Cage
Dell  Precision™ Workstation M6500  Service Manual
WARNING: Before  working  inside  your computer, read  the safety information that shipped with your
computer. For  additional  safety best practices  information,  see  the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
Removing the PCMCIA Card Cage
NOTE:  You  may need  to  install Adobe® Flash®  Player  from   Adobe.com in order  to  view  the illustrations below.
1 .  Follow the procedures in  Before  Working Inside Your  Computer
.
2 .  Remove the  battery
.
3 .  Remove the  access  panel
.
4 .  Remove the  hard drive
.
5 .  Remove the  secondary hard drive
.
6 .  Remove the  hinge  cover
.
7 .  Remove the  keyboard
.
8 .  Remove the  display  assembly
.
9 .  Remove the  palm rest
.
10 . Release the card -cage  cable  tab. 
						

							11. Disconnect the card  cage  cable  from  the system  board.
12 . Remove the screws that  secure the card  cage  to  the computer. 
						

							13. Remove the card  cage  from  the computer.
Replacing the PCMCIA Card Cage
To replace the PCMCIA  card  cage, perform  the above  steps in reverse  order. 
						

							Back to  Contents Page