dell latitude x200 User Manual

Cooling Fan: Dell Latitude X200 Service Manual
 
1 cooling fan connector
2 cooling fan cable
3 cooling fan
4 M2 x 3-mm screws (4)
5 system board connector
8.  Remove the tape that secures the cooling fan cable to the fan. 
NOTICE: Do not pull on the cooling fan cable. Pull from the cooling fan 
connector to disconnect the cable. 
9.  Disconnect the cooling fan cable from the system board connector. 
file:///F|/Service%20Manuals/Dell/Latitude/x200/fan.htm (2 of 3) [2/28\
/2004 8:24:04 AM] 

Cooling Fan: Dell Latitude X200 Service Manual
10.  Lift the cooling fan up and out of the bottom case. 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/x200/fan.htm (3 of 3) [2/28\
/2004 8:24:04 AM] 

System Board: Dell Latitude X200 Service Manual
Back to Contents Page 
System Board 
Dell™ Latitude™ X200 Service Manual
Removing the System Board 
NOTICE: Disconnect the computer and any attached devices from electrical 
outlets. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
touching an unpainted metal surface on the computer. 
NOTICE: Read Preparing to Work Inside the Computer before performing the 
following procedure. 
1.  Remove the 
battery. 
2.  Remove the...

System Board: Dell Latitude X200 Service Manual
 
1 system board
2 M2 x 4-mm screws (4)
3 status light (LED) cable
4 ZIF connector
11.  Disconnect the 
left and right speakers from their system board connectors. 
12.  Disconnect the 
reserve battery connector from the system board connector. 
13.  Lift the ZIF connector, and remove the status light (LED) cable from i\
ts ZIF  connector on the system board. 
14.  Lift the system board up and out of the bottom case....

System Board: Dell Latitude X200 Service Manual
15.  Remove the modem daughter card, and set it aside to install in the replacement 
system board. 
Replacing the System Board 
1.  Install the modem daughter card that you removed from the old system board 
in the replacement system board. 
2.  Place the system board in the bottom case. 
NOTE: Route cables so that they will not be crimped or pinched when the 
complete assembly is put back together. 
3.  Reconnect the status light (LED) cable to the system...

Modem Daughter Card: Dell Latitude X200 Service Manual
Back to Contents Page 
Modem Daughter Card 
Dell™ Latitude™ X200 Service Manual
Removing the Modem Daughter Card 
NOTICE: Disconnect the computer and any attached devices from electrical 
outlets. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
touching an unpainted metal surface on the computer. 
NOTICE: Read Preparing to Work Inside the Computer before performing the 
following procedure. 
1.  Remove the 
battery. 
2....

Modem Daughter Card: Dell Latitude X200 Service Manual
NOTICE: Do not pull on the modem cable. Pull from the modem connector to 
disconnect the cable. 
11.  Disconnect the modem cable from the modem daughter card. 
 
1 modem daughter card
2 modem connector
3 modem cable
4 pull tab
5 M2 x 4-mm screw
Replacing the Modem Daughter Card 
1.  Connect the modem cable to the modem. 
file:///F|/Service%20Manuals/Dell/Latitude/x200/modem.htm (2 of 3) [2/\
28/2004 8:24:05 AM] 

Modem Daughter Card: Dell Latitude X200 Service Manual
NOTICE: The connectors are keyed for correct insertion; do not force the 
connections. 
2.  Align the modem with the screw hole and press the modem into the connect\
or  on the system board. 
3.  Use the screw hole to align the card, and press the card into its connec\
tor on  the system board. 
4.  Install the M2 x 4-mm screw that secures the modem to the system board. \
Back to Contents Page...

Battery Latches: Dell Latitude X200 Service Manual
Back to Contents Page 
Battery Latches 
Dell™ Latitude™ X200 Service Manual
Removing the Battery Latches 
NOTICE: Disconnect the computer and any attached devices from electrical 
outlets. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
touching an unpainted metal surface on the computer. 
NOTICE: Read Preparing to Work Inside the Computer before performing the 
following procedure. 
1.  Remove the 
battery. 
2.  Remove the...

Battery Latches: Dell Latitude X200 Service Manual
 
1 battery lock latch
2 snap tabs (3 per latch 
button)
3 battery latch release
4 spring
5 bottom case
Replacing the Battery Latches 
1.  Snap in the new latch button from behind the bottom case, making certain\
 that 
the snap tabs are fully engaged in the latch. 
NOTE: The battery latch release has a spring and should be installed on the 
right side of the bottom case. 
2.  Ensure that the newly installed latch moves smoothly and freely when pus\
hed...