dell latitude x200 User Manual

Battery: Dell Latitude X200 Service Manual
Back to Contents Page 
Battery 
Dell™ Latitude™ X200 Service Manual
Removing the Battery 
NOTICE: If you choose to replace the battery with the computer in standby 
mode, you have up to 1 minute to complete the battery replacement before\
 the 
computer shuts down and loses any unsaved data. 
1.  Ensure that the computer is turned off, suspended in a power management \
 mode, or connected to an electrical outlet. 
2.  If the computer is docked, undock it. 
3....

Battery: Dell Latitude X200 Service Manual
 
1 battery lock latch
2 battery latch release
Replacing the Battery 
 
CAUTION: Use only Dell™ battery modules that are approved for use 
with this computer. Use of other types may increase the risk of fire or \
explosion.
1.  Slide the battery into the bay until the latch release clicks. 
2.  Slide the battery lock latch into the lock position. 
file:///F|/Service%20Manuals/Dell/Latitude/x200/battery.htm (2 of 3) [\
2/28/2004 8:23:56 AM] 

Battery: Dell Latitude X200 Service Manual
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/x200/battery.htm (3 of 3) [\
2/28/2004 8:23:56 AM] 

Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual
Back to Contents Page 
Memory Module and Mini PCI Card 
Dell™ Latitude™ X200 Service Manual
  Memory Module
  Mini PCI Card
Memory Module
Removing the Memory Module Cover 
NOTICE: Disconnect the computer and any attached devices from electrical 
outlets, and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
touching an unpainted metal surface on the computer. 
NOTICE: Read...

Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual
 
1 captive screw
2 memory module cover
Removing the Memory Module 
NOTICE: To prevent damage to the memory module connector, do not use 
tools to spread the inner metal tabs that secure the memory module. 
NOTICE: Handle memory modules by their edges, and do not touch the 
components on a module. 
1.  Use your fingertips to spread apart the securing clips on each end of th\
e  memory module connector. 
The module should pop up.
2....

Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual
 
1 memory module
2 securing clips (2)
Replacing the Memory Module 
1.  Ground yourself and install the new memory module: 
a.  Align the notch in the module with the slot in the center of the connect\
or. 
b.  Slide the edge of the module firmly into the connector, and rotate the  module down until you hear a click. If you do not hear the click, remove\
 
the module and reinstall it. 
NOTE: If the memory module is not installed properly,...

Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual
 
2.  Replace the memory module cover and tighten the captive screw. 
NOTICE: If the memory module cover is difficult to close, remove the module 
and reinstall it. Forcing the cover to close may damage your computer. 
 
file:///F|/Service%20Manuals/Dell/Latitude/x200/upgrades.htm (4 of 8) \
[2/28/2004 8:23:57 AM] 

Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual
1captive screw
2 memory module cover
3.  Insert the battery into the battery bay, or connect the AC adapter to yo\
ur  computer and an electrical outlet. 
4.  Turn on the computer. 
As the computer boots, it detects the additional memory and automaticall\
y updates 
the system configuration information.
Mini PCI Card
Removing the Mini PCI Card Cover 
NOTICE: Disconnect the computer and any attached devices from electrical 
outlets, and...

Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual
 
1 captive screw
2 Mini PCI card cover
Removing the Mini PCI Card 
1.  Disconnect the antenna cable from the Mini PCI card. 
2.  Release the Mini PCI card by spreading the metal securing tabs until the\
 card 
pops up slightly. 
3.  Lift the Mini PCI card out of its connector. 
file:///F|/Service%20Manuals/Dell/Latitude/x200/upgrades.htm (6 of 8) \
[2/28/2004 8:23:57 AM] 

Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual
 
Replacing the Mini PCI Card 
1.  Align the Mini PCI card with the connector at a 45-degree angle, and pre\
ss the Mini PCI card into the connector. 
2.  Connect the antenna cable to the antenna connector on the Mini PCI card.\
 
NOTICE: The connectors are keyed for correct insertion; do not force the 
connections. 
3.  Lower the Mini PCI card toward the inner tabs to approximately a 20-degr\
ee  angle. 
4.  Continue lowering the Mini...