dell latitude v710 v740 User Manual
Here you can view all the pages of manual dell latitude v710 v740 User Manual. The Dell manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\
al
9. Disconnect the bottom flex cable connector from the inverter connector o\
n the system board by pulling on the attached pull tab away from the inverter connect\
or.
1 top flex cable connector
2 display panel connector
3 pull tab
4 pull tab
5 inverter connector on
system board
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/display.htm (7 of 1\
0) [2/28/2004 8:22:14 AM]](http://img.usermanuals.tech/thumb/19/48103/w300_dell-latitude-v710-v740-service-manual-50.png "Page 51
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\
al
9. Disconnect the bottom flex cable connector from the inverter connector o\
n the system board by pulling on the attached pull tab away from the inverter connect\
or.
1 top flex cable connector
2 display panel connector
3 pull tab
4 pull tab
5 inverter connector on
system board
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/display.htm (7 of 1\
0) [2/28/2004 8:22:14 AM]")
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\ al 9. Disconnect the bottom flex cable connector from the inverter connector o\ n the system board by pulling on the attached pull tab away from the inverter connect\ or. 1 top flex cable connector 2 display panel connector 3 pull tab 4 pull tab 5 inverter connector on system board file:///F|/Service%20Manuals/Dell/Latitude/v710-740/display.htm (7 of 1\ 0) [2/28/2004 8:22:14 AM]
Page 52
![Page 52
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\
al
6bottom flex cable
connector
10. Remove the tape that secures the display panel connector and the tape th\
at secures the middle of the display-feed flex cable to the display panel.
11. Pull the top flex cable connector down and away to remove it from the di\
splay panel connector.
Replacing the Display Panel
1. Reconnect the top flex cable connector to the display panel connector.
2. Reconnect the bottom flex cable...](http://img.usermanuals.tech/thumb/19/48103/w300_dell-latitude-v710-v740-service-manual-51.png "Page 52
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\
al
6bottom flex cable
connector
10. Remove the tape that secures the display panel connector and the tape th\
at secures the middle of the display-feed flex cable to the display panel.
11. Pull the top flex cable connector down and away to remove it from the di\
splay panel connector.
Replacing the Display Panel
1. Reconnect the top flex cable connector to the display panel connector.
2. Reconnect the bottom flex cable...")
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\ al 6bottom flex cable connector 10. Remove the tape that secures the display panel connector and the tape th\ at secures the middle of the display-feed flex cable to the display panel. 11. Pull the top flex cable connector down and away to remove it from the di\ splay panel connector. Replacing the Display Panel 1. Reconnect the top flex cable connector to the display panel connector. 2. Reconnect the bottom flex cable...
Page 53
![Page 53
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\
al
3. Remove the display bezel.
4. Remove the two M2.5 x 5-mm screws that secure the display latch and brac\
ket to the top cover.
5. Lift the display latch, bracket, and spring up and out of the top cover.\
1 spring
2 spring hook (display
latch)
3 M2.5 x 5-mm screws (2)
4 display latch
5 bracket
6 spring hook (top cover)
Replacing the Display Latch
1. Attach one end of the spring to the spring hook on the left edge of...](http://img.usermanuals.tech/thumb/19/48103/w300_dell-latitude-v710-v740-service-manual-52.png "Page 53
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\
al
3. Remove the display bezel.
4. Remove the two M2.5 x 5-mm screws that secure the display latch and brac\
ket to the top cover.
5. Lift the display latch, bracket, and spring up and out of the top cover.\
1 spring
2 spring hook (display
latch)
3 M2.5 x 5-mm screws (2)
4 display latch
5 bracket
6 spring hook (top cover)
Replacing the Display Latch
1. Attach one end of the spring to the spring hook on the left edge of...")
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\ al 3. Remove the display bezel. 4. Remove the two M2.5 x 5-mm screws that secure the display latch and brac\ ket to the top cover. 5. Lift the display latch, bracket, and spring up and out of the top cover.\ 1 spring 2 spring hook (display latch) 3 M2.5 x 5-mm screws (2) 4 display latch 5 bracket 6 spring hook (top cover) Replacing the Display Latch 1. Attach one end of the spring to the spring hook on the left edge of...
Page 54
![Page 54
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\
al
3. Replace the two M2.5 x 5-mm screws that secure the display latch and bra\
cket to the top cover.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/display.htm (10 of \
10) [2/28/2004 8:22:14 AM]](http://img.usermanuals.tech/thumb/19/48103/w300_dell-latitude-v710-v740-service-manual-53.png "Page 54
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\
al
3. Replace the two M2.5 x 5-mm screws that secure the display latch and bra\
cket to the top cover.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/display.htm (10 of \
10) [2/28/2004 8:22:14 AM]")
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manu\ al 3. Replace the two M2.5 x 5-mm screws that secure the display latch and bra\ cket to the top cover. Back to Contents Page file:///F|/Service%20Manuals/Dell/Latitude/v710-740/display.htm (10 of \ 10) [2/28/2004 8:22:14 AM]
Page 55
![Page 55
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
Back to Contents Page
EMI Shield, Video Board, and Palm Rest
Dell™ Latitude™ V710/V740 Service Manual
EMI Shield
Video Board
Palm Rest
EMI Shield
NOTICE: Disconnect the computer and any attached devices from electrical outlets\
, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\
ching
an unpainted metal surface on the computer.
NOTICE: Read...](http://img.usermanuals.tech/thumb/19/48103/w300_dell-latitude-v710-v740-service-manual-54.png "Page 55
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
Back to Contents Page
EMI Shield, Video Board, and Palm Rest
Dell™ Latitude™ V710/V740 Service Manual
EMI Shield
Video Board
Palm Rest
EMI Shield
NOTICE: Disconnect the computer and any attached devices from electrical outlets\
, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\
ching
an unpainted metal surface on the computer.
NOTICE: Read...")
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \ Manual Back to Contents Page EMI Shield, Video Board, and Palm Rest Dell™ Latitude™ V710/V740 Service Manual EMI Shield Video Board Palm Rest EMI Shield NOTICE: Disconnect the computer and any attached devices from electrical outlets\ , and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\ ching an unpainted metal surface on the computer. NOTICE: Read...
Page 56
![Page 56
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
1 EMI shield
2 M2.5 x 12-mm screws
(3)
Video Board
Removing the Video Board
NOTICE: Disconnect the computer and any attached devices from electrical outlets\
, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\
ching
an unpainted metal surface on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the following...](http://img.usermanuals.tech/thumb/19/48103/w300_dell-latitude-v710-v740-service-manual-55.png "Page 56
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
1 EMI shield
2 M2.5 x 12-mm screws
(3)
Video Board
Removing the Video Board
NOTICE: Disconnect the computer and any attached devices from electrical outlets\
, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\
ching
an unpainted metal surface on the computer.
NOTICE: Read Preparing to Work Inside the Computer before performing the following...")
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \ Manual 1 EMI shield 2 M2.5 x 12-mm screws (3) Video Board Removing the Video Board NOTICE: Disconnect the computer and any attached devices from electrical outlets\ , and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\ ching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the following...
Page 57
![Page 57
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
l For V710, the screw is M2.5 x 5 mm.
l For V740, the screw is M2.5 x 8mm.
4. Pull the video board out of the bottom case:
l For V710, pull the video board by the edges toward the front of the comp\
uter.
l For V740, pull the video board by the pull tab toward the front of the c\
omputer.
V710 Video Board
1 M2.5 x 5-mm screw (1)
2 V710 video board
V740 Video Board...](http://img.usermanuals.tech/thumb/19/48103/w300_dell-latitude-v710-v740-service-manual-56.png "Page 57
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
l For V710, the screw is M2.5 x 5 mm.
l For V740, the screw is M2.5 x 8mm.
4. Pull the video board out of the bottom case:
l For V710, pull the video board by the edges toward the front of the comp\
uter.
l For V740, pull the video board by the pull tab toward the front of the c\
omputer.
V710 Video Board
1 M2.5 x 5-mm screw (1)
2 V710 video board
V740 Video Board...")
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \ Manual l For V710, the screw is M2.5 x 5 mm. l For V740, the screw is M2.5 x 8mm. 4. Pull the video board out of the bottom case: l For V710, pull the video board by the edges toward the front of the comp\ uter. l For V740, pull the video board by the pull tab toward the front of the c\ omputer. V710 Video Board 1 M2.5 x 5-mm screw (1) 2 V710 video board V740 Video Board...
Page 58
![Page 58
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
1 V740 video board
2 M2.5 x 8-mm screw (1)
3 pull tab
Replacing the Video Board
1. Align the top right corner of the video board with the guide on the syst\
em board, and
slide the top edge of the video board under the palm rest.
V710 Video Board
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/palmrest.htm (4 of \
12) [2/28/2004 8:22:16 AM]](http://img.usermanuals.tech/thumb/19/48103/w300_dell-latitude-v710-v740-service-manual-57.png "Page 58
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
1 V740 video board
2 M2.5 x 8-mm screw (1)
3 pull tab
Replacing the Video Board
1. Align the top right corner of the video board with the guide on the syst\
em board, and
slide the top edge of the video board under the palm rest.
V710 Video Board
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/palmrest.htm (4 of \
12) [2/28/2004 8:22:16 AM]")
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \ Manual 1 V740 video board 2 M2.5 x 8-mm screw (1) 3 pull tab Replacing the Video Board 1. Align the top right corner of the video board with the guide on the syst\ em board, and slide the top edge of the video board under the palm rest. V710 Video Board file:///F|/Service%20Manuals/Dell/Latitude/v710-740/palmrest.htm (4 of \ 12) [2/28/2004 8:22:16 AM]
Page 59
![Page 59
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
1 M2.5 x 5-mm screw (1)
2 palm rest
3 top right corner of the
V710 video board
4 guide
V740 Video Board
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/palmrest.htm (5 of \
12) [2/28/2004 8:22:16 AM]](http://img.usermanuals.tech/thumb/19/48103/w300_dell-latitude-v710-v740-service-manual-58.png "Page 59
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
1 M2.5 x 5-mm screw (1)
2 palm rest
3 top right corner of the
V710 video board
4 guide
V740 Video Board
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/palmrest.htm (5 of \
12) [2/28/2004 8:22:16 AM]")
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \ Manual 1 M2.5 x 5-mm screw (1) 2 palm rest 3 top right corner of the V710 video board 4 guide V740 Video Board file:///F|/Service%20Manuals/Dell/Latitude/v710-740/palmrest.htm (5 of \ 12) [2/28/2004 8:22:16 AM]
Page 60
![Page 60
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
1 M2.5 x 8-mm screw (1)
2 palm rest
3 top right corner of the
V740 video board
4 guide
NOTICE: For V740 only, before you connect the video board to the system board, e\
nsure
that you route the power- board flex cable under the memory module.
2. Lay the video board flat on the system board, and connect the video boar\
d connector to the interface connector on the system board.
V710 Video Board Connector...](http://img.usermanuals.tech/thumb/19/48103/w300_dell-latitude-v710-v740-service-manual-59.png "Page 60
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \
Manual
1 M2.5 x 8-mm screw (1)
2 palm rest
3 top right corner of the
V740 video board
4 guide
NOTICE: For V740 only, before you connect the video board to the system board, e\
nsure
that you route the power- board flex cable under the memory module.
2. Lay the video board flat on the system board, and connect the video boar\
d connector to the interface connector on the system board.
V710 Video Board Connector...")
EMI Shield, Video Board, and Palm Rest: Dell Latitude V710/V740 Service \ Manual 1 M2.5 x 8-mm screw (1) 2 palm rest 3 top right corner of the V740 video board 4 guide NOTICE: For V740 only, before you connect the video board to the system board, e\ nsure that you route the power- board flex cable under the memory module. 2. Lay the video board flat on the system board, and connect the video boar\ d connector to the interface connector on the system board. V710 Video Board Connector...