dell latitude c610 c510 User Manual

							Microprocessor Module: Dell Latitude C610/C510 Service Manual
NOTICE: Hold the microprocessor down while turning the cam screw to prevent 
intermittent contact between the cam screw and microprocessor (see 

Microprocessor Module Removal). 
2.  Tighten the ZIF socket by turning the cam screw clockwise to secure the \
 microprocessor module to the system board. 
3.  Update the BIOS using a flash BIOS update program floppy disk or CD. For\
  instructions on how to flash the BIOS, see 
Flashing the BIOS. 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/cpu.htm (4 of 4) [\
2/28/2004 7:55:51 AM] 
						

							Hybrid Cooling Fan: Dell Latitude C610/C510 Service Manual
Back to Contents Page 
Hybrid Cooling Fan 
Dell™ Latitude™ C610/C510 Service Manual
  Removing the Hybrid Cooling Fan 
Removing the Hybrid Cooling Fan 
NOTICE: Disconnect the computer and any attached devices from electrical 
outlets, and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
touching an unpainted metal surface on the computer. 
NOTICE: Read Preparing to Work Inside the Computer before performing the 
following procedure. 
1.  Remove the 
hard drive. 
2.  Remove the 
keyboard. 
3.  Remove the 
display assembly. 
4.  Remove the 
palm rest. 
5.  Remove the 
microprocessor thermal cooling assembly. 
6.  Remove the two M2.5 x 5-mm screws and one M2 x 3-mm screw that secure  the hybrid cooling fan to the system board. 
Hybrid Cooling Fan Removal 
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/fan.htm (1 of 3) [\
2/28/2004 7:55:52 AM] 
						

							Hybrid Cooling Fan: Dell Latitude C610/C510 Service Manual
 
1 system-board interface connector 5M2 x 3-mm screw (1)
2 fan power cable 6M2.5 x 5-mm screws (2)
3 spring fingers 7hybrid cooling fan
4 keyboard screw hole   
7.  Disconnect the fan power cable from the system-board interface connector\
 and  remove the hybrid cooling fan. 
NOTE: The fan power cable is long, and can be pulled out from under the EMI 
shield to provide access to the connector. 
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/fan.htm (2 of 3) [\
2/28/2004 7:55:52 AM] 
						

							Hybrid Cooling Fan: Dell Latitude C610/C510 Service Manual
NOTICE: Do not block the keyboard screw hole when reinstalling the fan. Route 
the fan power cable under the spring fingers and behind the keyboard scr\
ew 
hole to prevent damage to the fan power cable. 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/fan.htm (3 of 3) [\
2/28/2004 7:55:52 AM] 
						

							Reserve Battery: Dell Latitude C610/C510 Service Manual
Back to Contents Page 
Reserve Battery 
Dell™ Latitude™ C610/C510 Service Manual
  Removing the Reserve Battery 
  Replacing the Reserve Battery 
Removing the Reserve Battery 
NOTICE: The reserve battery provides power to the computers RTC and NVRAM when \
the computer is turned off. Removing the battery causes the computer to \
lose the date 
and time information as well as all user-specified parameters in the BIO\
S. If possible, 
make a copy of this information before you remove the reserve battery. 
NOTICE: Disconnect the computer and any attached devices from electrical outlets\
, and 
remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by tou\
ching 
an unpainted metal surface on the computer. 
NOTICE: Read Preparing to Work Inside the Computer before performing the following 
procedure. 
1.  Remove the 
hard drive. 
2.  Remove the 
keyboard. 
3.  Disconnect the reserve battery cable from the system board connector. 
4.  Pry the reserve battery free from the system board. The reserve battery \
is attached to  the system board with a piece of adhesive tape. 
5.  Remove any remnants of the adhesive tape from the system board. 
Reserve Battery Removal 
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/rsrvbatt.htm (1 of \
3) [2/28/2004 7:55:53 AM] 
						

							Reserve Battery: Dell Latitude C610/C510 Service Manual
 
1 reserve battery
2 speaker connector
3 system board connector
4 reserve battery cable
Replacing the Reserve Battery 
1.  Connect the reserve battery cable to the system board connector. 
2.  Position the reserve battery above the speaker connector on the system b\
oard. 
3.  Update the BIOS using a flash BIOS update program floppy disk or CD. For\
 instructions 
on how to flash the BIOS, see 
Flashing the BIOS. 
Back to Contents Page
 
 
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/rsrvbatt.htm (2 of \
3) [2/28/2004 7:55:53 AM] 
						

							Reserve Battery: Dell Latitude C610/C510 Service Manual
 
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/rsrvbatt.htm (3 of \
3) [2/28/2004 7:55:53 AM] 
						

							Flashing the BIOS: Dell Latitude C610/C510 Service Manual
Back to Contents Page 
Flashing the BIOS 
Dell™ Latitude™ C610/C510 Service Manual
  Flashing the BIOS
Flashing the BIOS
To update the basic input/output system (BIOS):1.  Make sure that the AC adapter is plugged in and that the main battery is\
  installed properly. 
2.  Turn on the computer. The following error message appears: 
System hardware failures: #0010 
Strike the F1 key to shutdown 
3.  Instead of pressing , insert the flash BIOS update floppy disk or CD\
 into  the appropriate drive and press , and then press . The computer \
displays the following message on the screen: 
Failure override 
Processor update failure. Reload current BIOS 
Strike the F1 key to continue, F2 to run the setup utility. 
4.  Press . The computer continues to boot and updates the new BIOS. 
5.  Press  to enter the system setup program and reset the boot sequence\
  with the appropriate drive, if required. 
6.  Press  to exit the system setup program. 
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/bios.htm (1 of 2) \
[2/28/2004 7:55:53 AM] 
						

							Flashing the BIOS: Dell Latitude C610/C510 Service Manual
7.  Remove the flash BIOS update floppy disk or CD from the drive and restar\
t the computer. 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/bios.htm (2 of 2) \
[2/28/2004 7:55:53 AM] 
						

							Speaker Assemblies: Dell Latitude C610/C510 Service Manual
Back to Contents Page 
Speaker Assemblies 
Dell™ Latitude™ C610/C510 Service Manual
  Removing the Speaker Assemblies 
  Replacing the Speaker Assemblies 
Removing the Speaker Assemblies 
NOTICE: Disconnect the computer and any attached devices from electrical 
outlets, and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
touching an unpainted metal surface on the computer. 
NOTICE: Read Preparing to Work Inside the Computer before performing the 
following procedure. 
The speakers are located on the front left and right sides of the bottom\
 case. Each 
speaker assembly is marked with a left or right label. Take note of the \
speaker and 
antenna wire routing so that you can replace them properly under their r\
outing clips.
Routing the Left Speaker Cable 
file:///F|/Service%20Manuals/Dell/Latitude/c510-610/speakers.htm (1 of \
6) [2/28/2004 7:55:54 AM]