dell inspiron 8200 User Manual

Display: Dell Inspiron 8200
2.  Detach the display flex cable from the strain relief and the graphics card. 
3.  Remove the 
display bezel. 
4.  Remove the M2.5 x 4-mm screw that secures the plastic flex-cable mountin\
g  bracket to the top cover. 
5.  Remove the six M2 x 3-mm screws (three on each side) from the right an\
d left  sides of the panel. 
6.  Lift the display panel and flex cable out of the top cover. 
7.  Disconnect the flex cable from the two connectors (one ZIF and one stan\
dard...

Display: Dell Inspiron 8200
 
1 ZIF connector
2 standard connector
Replacing the Display Panel 
HINT: Use a magnetic screwdriver to reassemble the display panel in the 
display. 
1.  Connect the flex cable to the two connectors on the back of the display \
panel. 
2.  Place the display panel in the top cover, taking care that the flex cabl\
e is in  place and is not crushed or crimped. 
3.  Reinstall the M2.5 x 4-mm screw that secures the flex-cable mounting bra\
cket  to the top cover. 
4.  Starting on...

Display: Dell Inspiron 8200
 
1.  Remove the 
hinge cover. 
2.  Detach the 
display flex cable from the strain relief and the graphics card. 
3.  Remove the 
display bezel. 
4.  Remove the 
display panel from the top cover. 
5.  Remove the display latch by disengaging the latch and captive spring. 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Inspiron/8200/display.htm (10 of 10)\
 [2/28/2004 7:40:53 AM] 

Microprocessor Module: Dell Inspiron 8200
Back to Contents Page 
Microprocessor Module 
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching unpainted metal on the computer. 
 
Removing the Microprocessor Module 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the 
keyboard. 
3.  Remove the...

Microprocessor Module: Dell Inspiron 8200
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the 
heat transfer areas on the microprocessor thermal-cooling assembly. The \
oils in 
your skin reduce the heat transfer capability of the thermal pads. 
4.  Remove the 
microprocessor thermal-cooling assembly. 
NOTICE: When removing the microprocessor module, pull the module straight 
up. Do not bend the pins. 
5.  Remove the microprocessor module. 
NOTICE: To avoid damage to the...

Microprocessor Module: Dell Inspiron 8200
 
1 cam screw
2 perpendicular 
screwdriver
3 processor die (do not 
touch)
a.  Loosen the cam screw that secures the microprocessor module. The location of the screw and the rotation direction may vary with the socke\
t 
manufacturer; look for small icons indicating open and locked positions.\
 
b.  Use the microprocessor extraction tool to remove the microprocessor  module. 
Replacing the Microprocessor Module 
NOTICE: If you received a flash BIOS update program...

Microprocessor Module: Dell Inspiron 8200
NOTICE: Proper seating of the microprocessor module does not require force. 
NOTICE: A microprocessor module that is not properly seated can result in an 
intermittent connection and subsequent failures. 
1.  Align the pin-1 triangle on the microprocessor with the pin-1 triangle i\
n the  socket, insert the microprocessor into the socket, and move the micropro\
cessor 
around slightly until you feel it settle into the socket. 
When the microprocessor module is...

Microprocessor Module: Dell Inspiron 8200
 
4.  Close the microprocessor retaining clip. 
5.  To latch the clip, insert a flat-blade scribe into the latch mechanism a\
nd pivot  the top of the scribe away from the clip. 
Back to Contents Page
 
 
 
file:///F|/Service%20Manuals/Dell/Inspiron/8200/cpu.htm (5 of 5) [2/28\
/2004 7:40:54 AM] 

Video Graphics Board: Dell Inspiron 8200
Back to Contents Page 
Video Graphics Board 
Dell™ Inspiron™ 8200
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching unpainted metal on the computer. 
 
1 M2.5 x 8-mm screws (3)
Removing the Video Graphics Board 
file:///F|/Service%20Manuals/Dell/Inspiron/8200/vidbd.htm (1 of 2) [2/\
28/2004 7:40:54 AM] 

Video Graphics Board: Dell Inspiron 8200
NOTE: The video graphics board may have a flexible shield attached to it with \
an adhesive. The shield prevents electromagnetic interference with other\
 
electronic devices, such as cellular phones. Do not exchange or reuse th\
e shield. 
Newer versions of the board may not require the shield; if a shield is r\
equired, it 
is already attached to the replacement board. 
1.  Follow the instructions in 
Preparing to Work Inside the Computer. 
2.  Remove the...