dell inspiron 8000 User Manual

Removing and Replacing Parts : Dell Inspiron 8100 
3.  Reinstall the M2.5 x 4-mm screw that secures the flex-cable mounting\
 bracket to the top cover. 
4.  Starting on the left side, use a magnetic screwdriver to reinstall t\
he six M2 x 3- mm screws that secure the display panel in the top cover. 
5.  Reinstall the display assembly bezel. 
Display Latch Assembly
 
1.  Remove the 
hinge cover. 
2.  Remove the screw securing the flex cable to its strain relief, and t\
hen use the  pull loop to remove the...

Removing and Replacing Parts : Dell Inspiron 8100 
NOTICE: When reconnecting the flex cable, press down on both ends of the 
connector, not in the middle. Pressing the middle of the connector can d\
amage 
fragile components. 
 
3.  Remove the 
display assembly bezel. 
4.  Remove the display panel from the top cover. 
5.  Remove the display latch by unsnapping the latch and captive spring.\
 
NOTICE: When replacing the display assembly latch, it may help to flex the 
cover slightly to allow more space...

Removing and Replacing Parts : Dell Inspiron 8100 
 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching an unpainted metal surface on the computer. 
Removing the Microprocessor Thermal Cooling 
Assembly 
file:///F|/Service%20Manuals/Dell/Inspiron/8000/remove.htm (30 of 56) \
[2/28/2004 7:32:58 AM] 

Removing and Replacing Parts : Dell Inspiron 8100 
 
1.  Follow the instructions in 
Preparing to Work Inside the Computer. 
2.  Remove the 
keyboard assembly. 
3.  Remove the 
hinge cover. 
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the 
heat transfer areas on the thermal cooling assembly. The oils in your sk\
in 
reduce the heat transfer capability of the thermal pads. 
4.  Insert a pry stick into the latch mechanism at the left side of the \
microprocessor  retaining clip...

Removing and Replacing Parts : Dell Inspiron 8100 
 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching an unpainted metal surface on the computer. 
Removing the Microprocessor Module 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the 
keyboard assembly. 
3.  Remove the 
hinge cover. 
NOTICE: To ensure...

Removing and Replacing Parts : Dell Inspiron 8100 
NOTICE: When removing the microprocessor module, pull the module straight 
up. Do not bend the pins. 
5.  Remove the microprocessor module. 
NOTICE: To avoid damaging the microprocessor when removing the cam lock 
screw, hold the screwdriver so that it is perpendicular to the microproc\
essor.  a.  Loosen the microprocessor socket cam lock screw. The location of the\
  screw and the rotation direction may vary with the socket manufacturer; \
look for...

Removing and Replacing Parts : Dell Inspiron 8100 
NOTICE: After replacing the microprocessor module, update the BIOS using a 
flash BIOS update program floppy disk or CD that came with the replaceme\
nt 
microprocessor. 
NOTICE: If the computer is running Microsoft® Windows® Millennium Edition \
(Me), you need to download the operating system update utility for Win\
dows Me 
from http://support.dell.com and install it before you upgrade the BIOS. 
NOTICE: Proper seating of the microprocessor module...

Removing and Replacing Parts : Dell Inspiron 8100 
 
Video Card
file:///F|/Service%20Manuals/Dell/Inspiron/8000/remove.htm (35 of 56) \
[2/28/2004 7:32:58 AM] 

Removing and Replacing Parts : Dell Inspiron 8100 
 
NOTICE: Disconnect the computer and attached devices from electrical outlets 
and remove any installed batteries. 
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by 
periodically touching an unpainted metal surface on the computer. 
Removing the Video Card 
1.  Follow the instructions in Preparing to Work Inside the Computer. 
2.  Remove the 
keyboard assembly. 
3.  Remove the 
hinge cover. 
4.  Detach the display flex cable...

Removing and Replacing Parts : Dell Inspiron 8100 
NOTICE: When reconnecting the flex cable, press down on both ends of the 
connector, not in the middle. Pressing the middle of the connector can d\
amage 
fragile components. 
Replacing the Video Card 
1.  Align the three screw holes and press down firmly on the top of the \
connector to seat the card in its connector. 
NOTICE: Make sure the card is correctly and firmly seated before continuing. 
Failure to do so will cause intermittent video failures....