DELL inspiron 4100 User Manual
Have a look at the manual DELL inspiron 4100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Battery and Module Bay Latches: Dell Inspiron 4150 Back to Contents Page Battery and Module Bay Latches Dell™ Inspiron™ 4150 Removing the Battery and Module Bay Latches NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the following procedure. 1. Remove the hard drive. 2. Remove the keyboard. 3. Remove the display. 4. Remove the palm rest. 5. Remove the system board. 6. Remove the latch button by using a plastic scribe to push on the snap ta\ bs until the latch button is released from the bottom case. To prevent the latch assembly from coming loose, apply pressure to the l\ atch and spring while removing the latch button. file:///F|/Service%20Manuals/Dell/Inspiron/4150/baylatch.htm (1 of 3) \ [2/28/2004 7:29:50 AM]
Battery and Module Bay Latches: Dell Inspiron 4150 1 bumps (2 per latch) 6snap tabs (2 per latch button) 2 slider 7holding feature (2) 3 spring 8upper latch assembly (2) 4 bottom case 9wear rib 5 latch buttons (2) Replacing the Battery and Module Bay Latches 1. If you are replacing the upper latch assembly: a. Slide the spring onto the slider, and reinstall the latch in the holding\ features on the inside of the bottom case. file:///F|/Service%20Manuals/Dell/Inspiron/4150/baylatch.htm (2 of 3) \ [2/28/2004 7:29:50 AM]
Battery and Module Bay Latches: Dell Inspiron 4150 b. Ensure that the slider is inserted into the hole, that the side of the l\ atch with the two bumps is facing the back of the case, and that the side wit\ h the wear rib is facing the front of the case. HINT: The latch will not function properly if the slider is oriented incorrect\ ly. 2. Snap in the new latch button from behind the bottom case, making certain\ that the snap tabs are fully engaged in the latch. To prevent the latch assembly from coming loose, apply pressure to the l\ atch and spring while installing the latch button. 3. Ensure that the newly installed latch moves smoothly and freely when pus\ hed and released. Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/4150/baylatch.htm (3 of 3) \ [2/28/2004 7:29:50 AM]