DELL inspiron 4100 User Manual
Have a look at the manual DELL inspiron 4100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Memory Modules, Mini PCI Card, and Modem: Dell Inspiron 4150 1 M2.5 x 12-mm screw (1) 2 captive screws (2) Removing the Memory Modules NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the following procedure. 1. Remove the memory module cover. file:///F|/Service%20Manuals/Dell/Inspiron/4150/upgrades.htm (2 of 8) \ [2/28/2004 7:29:41 AM]
Memory Modules, Mini PCI Card, and Modem: Dell Inspiron 4150 NOTICE: To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module. 2. Use your fingertips to carefully spread apart the inner tabs on each end\ of the memory module connector. The module pops up. 1 JDIM 1 connector 2 JDIM 2 connector 3 keying tab 4 keying notch on memory module file:///F|/Service%20Manuals/Dell/Inspiron/4150/upgrades.htm (3 of 8) \ [2/28/2004 7:29:41 AM]
Memory Modules, Mini PCI Card, and Modem: Dell Inspiron 4150 5inner tabs (2 per connector) 3. Lift the memory module out of its connector. Replacing Memory Modules 1. If you only have one memory module, install it in the connector labeled \ JDIM1 on the system board. Install a second memory module in the connector lab\ eled JDIM2. HINT: Memory modules are keyed, or designed to fit into their connectors, in only one direction. NOTICE: The memory module must be inserted at a 45-degree angle to avoid damaging the connector. 2. Align the notch in the memory module edge connector with the keying tab \ in the connector on the system board. 3. Slide the edge connector of the module firmly into the connector at a 45\ -degree angle, and rotate the module down until you hear a click. If you do not \ hear the click, remove the module and reinstall it. 4. Replace the cover and tighten the two captive screws. Mini PCI Card You must remove the Mini PCI card before the system board can be removed\ . Removing the Mini PCI Card NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. file:///F|/Service%20Manuals/Dell/Inspiron/4150/upgrades.htm (4 of 8) \ [2/28/2004 7:29:41 AM]
Memory Modules, Mini PCI Card, and Modem: Dell Inspiron 4150 NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the following procedure. 1. Remove the memory module cover. 2. Disconnect the Mini PCI card from any attached cables. 3. Release the Mini PCI card by spreading the metal securing tabs until the\ card pops up slightly. 4. Lift the Mini PCI card out of its connector. NOTICE: To avoid damaging the Mini PCI card, never place cables on top of or under the card. file:///F|/Service%20Manuals/Dell/Inspiron/4150/upgrades.htm (5 of 8) \ [2/28/2004 7:29:41 AM]
Memory Modules, Mini PCI Card, and Modem: Dell Inspiron 4150 1antenna connectors on card (2) 2 antenna cables (2) Replacing the Mini PCI Card 1. Align the Mini PCI card with the connector at a 45-degree angle, and pre\ ss the Mini PCI card into the connector until you hear a click. NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card. 2. Connect the antenna cables to the Mini PCI card. 3. Replace the cover, and tighten the screws. Modem Removing the Modem NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the following procedure. 1. Remove the memory module cover. 2. Remove the two M2 x 3-mm screws that secure the modem to the system board. file:///F|/Service%20Manuals/Dell/Inspiron/4150/upgrades.htm (6 of 8) \ [2/28/2004 7:29:41 AM]
Memory Modules, Mini PCI Card, and Modem: Dell Inspiron 4150 NOTICE: Do not pull on the modem cable. Pull from the modem connector to disconnect the cable. 3. Pull straight up on the attached pull-tab to lift the modem out of its c\ onnector on the system board and disconnect the modem cable. 1 M2 x 3-mm screws (2) 2 modem connector 3 modem cable 4 pull-tab Replacing the Modem 1. Connect the modem cable to the modem. file:///F|/Service%20Manuals/Dell/Inspiron/4150/upgrades.htm (7 of 8) \ [2/28/2004 7:29:41 AM]
Memory Modules, Mini PCI Card, and Modem: Dell Inspiron 4150 NOTICE: The connectors are keyed for correct insertion; do not force the connections. 2. Align the modem with the screw holes on the system board and press down on the pull-tab to seat the modem in the connector. NOTICE: Pressing down on the modem anywhere other than on the pull-tab can break the modem. 3. Install the two M2 x 3-mm screws that secure the modem to the system boa\ rd. 4. Replace the cover, and tighten the screws. Back to Contents Page file:///F|/Service%20Manuals/Dell/Inspiron/4150/upgrades.htm (8 of 8) \ [2/28/2004 7:29:41 AM]
Keyboard: Dell Inspiron 4150 Back to Contents Page Keyboard Dell™ Inspiron™ 4150 Removing the Keyboard NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read Preparing to Work Inside the Computer before performing the following procedure. 1. Remove the hard drive. 2. Turn the computer over, and remove the five M2.5 x 12-mm screws labeled \ circle K. file:///F|/Service%20Manuals/Dell/Inspiron/4150/keyboard.htm (1 of 6) \ [2/28/2004 7:29:42 AM]
Keyboard: Dell Inspiron 4150 1 M2.5 x 12-mm screws (5) 3. Turn the computer over and open the display. NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time- consuming to replace. Be careful when removing and handling the keyboard\ . 4. Remove the center control cover: a. Use a small, flat-blade screwdriver or plastic scribe to lift the right \ edge of the center control cover and pry it loose from the bottom case. b. Lift the center control cover up and away from the bottom case. file:///F|/Service%20Manuals/Dell/Inspiron/4150/keyboard.htm (2 of 6) \ [2/28/2004 7:29:42 AM]
Keyboard: Dell Inspiron 4150 5. To release the keyboard from the palm rest, use a small, flat-blade scre\ wdriver or plastic scribe to pull up on the right edge of the blank key on the k\ eyboard. file:///F|/Service%20Manuals/Dell/Inspiron/4150/keyboard.htm (3 of 6) \ [2/28/2004 7:29:42 AM]