Dell E198wfp Users Guide

 After placing   the monitor panel on soft cloth  or cushion,  complete  the following steps to  remove the stand.
1. Place  the monitor on a  table.
2. Lift the stand  away  from  the monitor while  pressing the stand  release  button.
Back to  Contents Page
 
 

Back to  Contents Page
Setting Up Your Monitor
Dell™ E198WFP  Flat Panel Monitor  Users Guide
  Connecting  Your  Monitor
  Using the Front Panel
   Using the OSD Menu
  Setting  the Optimal  Resolution
  Using the Dell Soundbar (Optional)
Connecting Your Monitor
CAUTION:  Before  you begin  any  of  the procedures in this  section, follow the  safety instructions.
or
 

1.Turn off your  computer  and  disconnect the power cable.
2. Connect either  the white DVI or the blue VGA cable  to  the connectors on the computer  and  the monitor.
3. Connect the power cable.
4. Turn on your  monitor and  computer. If  you do not see an image,  push the input select button and  ensure the correct input source is selected. If  you still do not see an
image,  see 
Troubleshooting your  monitor
.
Using the Front Panel
Use  the buttons on the front of the monitor to  adjust  the image...

  or     
  or     
 
OSD menu /  select The  Menu button is used to  open and  exit  the on-screen display  (OSD),  and  exit  from  menus  and  sub -menus. See 
Using
the OSD Menu.
Down (-) and Up  (+)Use  these buttons to  adjust  (decrease/increase ranges)  items  in the OSD menu.
Power Button and Indicator Use  the
 power button to  turn  the monitor on and  off.
The  Blue  light  indicates  the monitor is on and  fully functional. An amber light  indicates  power save mode.
 
Using the OSD Menu...

1.  Push the Menu button to  open the OSD menu  and  display  the main menu.
Main  Menu for  Analog (VGA)  Input  Main  Menu for  Digital  (DVI) Input
or
 

or
 
NOTE: Positioning  and  Image Settings are only  available  when  you are using  the analog  (VGA) connector.
2 .  Push the  - and   + buttons to  move  between  the setting  options.  As you move  from  one  icon to  another,  the option name is highlighted.  See the table below  for a  complete  list
of all the options available  for the monitor.
3 .  Push the MENU button once  to  activate the highlighted option.  
4 .  Push - and  + button to  select the desired parameter.
5 .  Push MENU to...

Contrast  adjusts the degree of difference between  darkness  and  lightness on the monitor screen.
Push the + button to  increase  the contrast  and  push the  - button to  decrease the contrast  (min  0 ~ max 100).
Positioning:
Horizontal
Vertical Positioning  moves the viewing area around  on the monitor screen.
When  making  changes to  either  the Horizontal  or Vertical  settings, no changes occur to  the size of the viewing area.  The  image
shifts
 in response  to  your  selection.
Minimum  is 0...

 
 
 Pixel Clock(Coarse)
 
Phase (Fine) If  satisfactory results  are not obtained  using  the Phase adjustment, use Pixel  Clock  (Coarse)  and  then  use Phase (fine), again.
NOTE:  This function may change  the width of the display  image.  Use  the Horizontal  function of the Position menu  to  center the
display  image on the screen.
NOTE:  When  using   DVI source,  the Image Settings option is not available.
Color
Settings
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Blue Preset
Red Preset...

As soon as choose Graphics,you can  choose Normal Preset,Multimedia Preset,Gaming Preset, Red Preset,Blue  Preset or User
Preset;
Select Gaming Preset for playing games in your  computer.Select Multimedia Preset to  view  media applications  such as photo,clip.......Select Red Preset for a  warm color.Select Blue  Preset for a  cool  color.
You  can  adjust  the monitor color  using  User  Preset, R, G, B.Normal  Preset mean color  temperature  6500K.  
There are three video  modes:Theater Preset ,Sports...

Select Blue  Preset for a  bluish tint. This color  setting  is used for text based applications  (spreadsheets, programming, text
editors, etc.).
Select Red Preset for a  reddish  tint.This  color  setting  is used for color -intensive  applications  (photograph image editing,
multimedia, movies,  etc.).
Select Normal Preset for default color  settings. This setting  is also  the “sRGB”  standard  default color  space.User  Preset:  Use  the plus and  minus buttons to  increase  or decrease each  of the...