Dell 3008wfp Users Guide

  Hue  
    This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color.   
Use   and   buttons to adjust the hue from 0 to 100.  
 makes video image shade into green ish  
 makes video image shade into purplish   
NOTE:   Hue  adjustment only available for video input.  
  Saturation  
    This feature can adjust the color saturation of the video image.   
Use   and   buttons to adjust the saturation from 0 to 100.  
 makes video image looks...

 
Display Reset   Reset the image to the original factory setting.  
 
Exit Menu  
Push   to exit the OSD main menu.  
  OTHER 
SETTINGS  
     
   
 
 
Back  
Push   to go back to the main menu.  
 
Language   Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, or Japanese).  
  Menu 
Transparency   This function is used to adjust the OSD background from opaque to transparent.  
  Menu Timer   OSD Hold Time: Sets the length of time the OSD will remain...

Reset      
 
Exit Menu  
Push   to exit the OSD main menu.  
  PBP 
SETTINGS  
    This function brings up a window displaying image from another input source. Thus you can watch 2 images from different sources at 
the same time.  
   
 
   
 
 
    Main source is VGA or DisplayPort or Component input.)  
   
 
   
Picture by Picture (PBP) submenu when Picture by Picture (PBP) ON (Second  source is DVI or HDMI or Composite or S - Video.
 
 
 
     

OSD Warning Messagess     
 
NOTE:  When using DVI source, the contrast adjustment is not available.  
 
Back   Push   to go back to the main menu.  
 
Mode   Use   and   buttons to browse and   to select Picture by Picture (PBP) On or Off.  
 
PBP Source   Select an input signal for Picture by Picture (PBP). (DVI - 1/DVI - 2/HDMI/Composite/S - Video).  
Use   and   buttons to browse and   to select.  
 
Preset Modes   You can choose different color presets for different viewing modes.  
Desktop mode is...

   
   
   
See  Solving Problems  for more information.  
Setting the Optimal Resolution  
To set the optimal resolution for the monitor:  
Windows XP:  
1. Right - click on the desktop and select  Properties .   
2. Select the  Settings  tab.   
3. Set the screen resolution to 1920 x 1200/2560 x 1600.   
4. Click  OK .   
Windows Vista or Windows 7:  
1. Right - click on the desktop and select  Personalization .   
2. Click Change Display Settings .   
3. Move the slider - bar to the right by pressing...

Using the Dell Soundbar (Optional)  
The Dell Soundbar is a stereo two channel system adaptable to mount on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to 
adjust the overall system level, a blue LED for power indication, and two audio headset jacks.  
 
Using the Tilt, Swivel, and Vertical Extension  
Tilt/Swivel  
With the built - in stand, you can tilt and/or swivel the monitor for the most comfortable viewing angle.  
 
Vertical Extension  
The stand extends...

 
Back to Contents Page    

Back to Contents Page   
Setting Up Your Monitor   
 
Important instructions to set the display resolution to 1920 x 1200 (VGA input 
source)/2560 x 1600(DVI/Displayport input sources) (Optimal)  
For optimal display performance while using the Microsoft Windows ®  operating systems, set the display resolution to  1920 x 1200/2560 x 1600  pixels by 
performing the following steps:  
In Windows XP:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Move the...

 
Information in this document is subject to change without notice.  
2007 -  
Reproduction in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  Dell  and the Dell logo are trademarks of Dell Inc;  Microsoft, Windows,  and  Windows NT  are registered trademarks of Microsoft Corporation;   
Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions.   
Other trademarks and trade names may be...

Back to Contents Page    
 
Setting Up the Monitor   
 
   Connecting the Monitor  
   Organizing Your Cables  
   Attaching the Soundbar (optional)  
   Removing the Stand    
   Attaching the Stand
Connecting Your Monitor  
To connect your monitor to the computer perform the following steps/instructions:  
l Turn off your computer and disconnect the power cable.   
l Connect either the white (digital DVI - D) or the blue (analog VGA) display connector cable to the corresponding video port on the back...