Dell 3008wfp Users Guide

 
Notes, Notices, and Cautions  
   
   
   
 
Information in this document is subject to change without notice.  
2007 -  
Reproduction in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  Dell  and the Dell logo are trademarks of Dell Inc;  Microsoft, Windows,  and  Windows NT  are registered trademarks of Microsoft Corporation;  
Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain...

Back to Contents Page    
 
About Your Monitor   
 
Product Features  
The  3008WFP  flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include:   
■  30 - inch (756.228 mm) viewable area display.   
■  2560 x 1600  resolution, plus full - screen support for lower resolutions.   
■  Wide viewing angle to allow viewing from a sitting or standing position, or moving side - to - side.   
■  Tilt, swivel and vertical extension...

Back View  
Side View  3 OSD Menu/Select 
4 Brightness & Contrast/Down ( - )
5 Auto - adjust/Up (+) 
6 Power button (with power light indicator)
Back view Back View with monitor stand
Label Description Use
1 VESA mounting holes (100mm)  
(Behind attached base plate)   To mount the monitor.  
   
2  Security lock slot To help secure your monitor.
3 Barcode serial number label To contact Dell for technical support.
4 Dell Soundbar mounting brackets (2) To attach the optional Dell Soundbar.
5 Regulatory...

Bottom View    
   
Bottom view Bottom view with monitor stand
Label Description Use
1 AC power cord connector Connect the power cord to wall outlet.
2 DC power connector for Dell 
Soundbar Connect the power cord for the Soundbar (optional).
3 Audio connectors  Connect the HDMI 2.0 channel or 5.1 channel audio 
output devices.   
Connect the front left/right channel output to the green 
connector.  Use this connector for 2.0/2.1 channel audio 
connection.  
Connect the rear left/right channel output to...

Pin Assignments  
VGA Connector  
 
 
 Pin 
Number 15 - pin Side of the Connected Signal Cable
1 Video - Red  
2 Video - Green
3 Video - Blue
4 GND
5 Self - test
6 GND - R
7 GND - G
8 GND - B
9 +5V
10 DDC - GND
11 GND
12 DDC - SDA
13 H - sync
14 V - sync
15 DDC - SCL
NOTE:  Pin 1 is at the top left.
Pin 
Number 24 - pin Side of the Connected Signal 
Cable
1 T.M.D.S. Data 2 -
2 T.M.D.S. Data 2+
3 T.M.D.S. Data 2/4 Shield
4 T.M.D.S. Data 4 -
5 NT.M.D.S. Data 4+
6 DDC Clock
7 DDC Data
8 No Connect
9...

 
20 -  
 
 
19 -  
 
  11 T.M.D.S. Data 1/3 Shield
12 T.M.D.S. Data 3 -
13 T.M.D.S. Data 3+
14 +5V Power
15 Self Test
16 Hot Plug Detect
17 T.M.D.S. Data 0 -
18 T.M.D.S. Data 0+
19 T.M.D.S. Data 0/5 Shield
20 T.M.D.S. Data 5 -
21 T.M.D.S. Data 5+
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock +
24 T.M.D.S. Clock  -
Pin   
Number  20 - pin Side of the Connected Signal Cable
1 ML Lane 3(n)
2 GND
3 ML Lane 3(p)
4 ML Lane 2(n)
5 GND
6 ML Lane 2(p)
7 ML Lane 1(n)
8 GND
9 ML Lane 1(p)
10 ML Lane 0(n)
11 GND
12 ML...

S - video Connector   
         
Composite Video Connector  
 
Luma Composite Chroma  
Component Video Connector  
 
   1 T.M.D.S. Data 2 -
2 T.M.D.S. Data 2 Shield
3 T.M.D.S. Data 2+ 
4 T.M.D.S. Data 1+
5 T.M.D.S. Data 1 Shield 
6 T.M.D.S. Data 1 -
7 T.M.D.S. Data 0+
8 T.M.D.S. Data 0 Shield 
9 T.M.D.S. Data 0 -
10 T.M.D.S. Clock +
11 T.M.D.S. Clock Shield 
12 T.M.D.S. Clock  -  
13 CEC
14 Reserved(N.C. on device) 
15 SCL
16 SDA
17 DDC/CEC Ground 
18 +5V Power 
19 Hot Plug Detect 
Pin 
Number 5 - pin...

Universal Serial Bus (USB) Interface  
This section gives you information about the USB ports that are available on the left side of your monitor.  
USB Upstream Connector  
   
USB Downstream Connector  
     
USB Ports    
l 1 upstream  -   rear   
l 4 downstream  -   2 on rear; 2 on left side    NOTE:  This monitor supports High - Speed Certified USB 2.0 interface.  
Transfer speed   Data Rate   Power Consumption
High speed  480 Mbps  2.5W (Max., each portyf
Full speed  12 Mbps  2.5W (Max., each...

Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data 
Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more 
information about changing the monitor settings, see  Operating the Monitor .  
Card Reader...