DELL 2355dn User Manual

60
4Select the printer you want to assign an MAC address to. The printer’s MAC address can 
be found on the Configuration page for the printer.
5When you finish setting the IP address for the printer, exit the program.
Installing Dell Software for Network Printing
When you connect your printer to the network, you must first configure the TCP/IP settings 
for the printer. After assigning and verifying the TCP/IP settings, you are ready to install the 
Dell software on each network printer.
You can install...

61
4If you want to install the drivers on this computer for network operation, select Local 
Installation
, and then click Next.
If you want to install the Dell software on remote computers or network servers on the 
same network, select 
Remote Installation. The domain administrator’s ID and password 
are required. Select the client computer(s) in the same domain on a network and then 
click 
Next.
 NOTE: Both server computer and client computer should be one of the following OS: 
Windows XP, Windows...

62
If you do not see your printer in the list, click Refresh to refresh the list or click Add 
Printer
 to add your printer to the network. To add the printer to the network, enter the 
port name and an existing IP address for the printer. 
If you want to install the printer on a server, select the 
I am setting up this printer on a 
server
 check box. 
6The screen displays the printer drivers installed on your computer.
You can change the printer name, set the printer to be shared on the network, and...

63
7Select Custom Installation. Click Next.
If you select 
Typical Installation, go to step 9.
8Select the components to be installed, and you can also change the destination folder. 
Click 
Next.
9When the printer installation is complete, you may print a test page. Click Finis h to 
complete the installation and close the wizard. You are now ready to print.
 

64
 NOTE: For information about installing the wireless network interface card and configuring the 
network parameters, refer to Wireless Network Quick Install Guide.
 

65
Uninstalling Software
You should remove the printer drivers if you are upgrading the software or if your driver 
installation fails. You can remove the software using the Installing Software in Microsoft® 
Windows® Operating System CD or the Windows uninstall option.
 NOTE: Close all programs before uninstalling software, and then restart your computer after 
uninstalling the software.
1
From the Start menu, select Programs  Dell Printers   Dell 2355dn Laser MFP   
Dell MFP Software Uninstall
....

66
Using the Dell Toner Management System
The Printer Status Monitor displays the status of the printer that is connected to the local 
network. Printer Ready, Printer Offline, Error-Check Printer, and the toner level or Toner Low 
alerts will for your printer.
Printer Status Monitor
The Printer Status Monitor screen launches when you send a print job to the printer. This 
only appears on the computer screen. Depending on the remaining toner level, the launched 
Printer Status Monitor screen is...

67
Printer Settings Utility
By using the Printer Settings Utility window, you can set up fax system data options, and 
create and edit Phonebook entries from your computer. 
When you install the software, the 
Printer Settings Utility is automatically installed. 
For information about installing the software, see Installing Software in Microsoft® 
Wind ows ® Opera ting Syste m.
To open the Printer Settings Utility:
1From the Start menu, select Programs   Dell Printers   Dell 2355dn Laser MFP   
Printer...

68
The Directory Section
Click the Phonebook or Address Book section and the Setting button to create and edit 
Phonebook or Emailbook entries.
Retrieve the Phonebook 
entries from the printer 
to the Printer Settings 
Utility.
Downloads the 
Phonebook entries from 
the Printer Settings 
Utility to the printer.Phonebook entries
Deletes a selected 
Phonebook entry.
Allows you to edit a
selected Phonebook
entry.
Modify a selected 
Phonebook entry.
 

69
The Fax Setting Section
Click each item under Fax Setting to setup the fax configuration. The printer setup contains 
the printer ID and printer fax number. You can select 
Printer Setup, Toll Save, and Default 
Output Options
.
.
The Setting Section
Click the Setting section and select the power save from the drop-down list.
You can select 
Po w e r  S a v e, To n e r  S a v e, and Emulation Type.
The Layout Section
Click the Layout section and select the orientation from the drop-down list.
You can...