DELL 2330dn User Manual
Have a look at the manual DELL 2330dn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
4. Locate the glass printhead lens, which is located within the recessed area in the top of the printer. 5 . Gently wipe the printhead lens with a clean, dry, lint-free cloth. 6 . Install the imaging drum kit with the toner cartridge by aligning the blue arrow guides of the imaging drum kit with the blue arrows found in the printer and pushing the imaging drum into the printer as far as it will go. The imaging drum kit clicks into place when correctly installed. 7 . Close the front cover. 8 . Turn the printer back on. Cleaning the Exterior of the Printer 1. Make sure that the printer is turned off and unplugged from the wall outlet. 2 . Remove paper from the paper support and paper exit tray. 3 . Dampen a clean, lint-free cloth with water. 4 . Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper exit tray. 5 . Make sure the paper support and paper exit tray are dry before beginning a new print job. NOTICE: Not using a clean, dry, lint-free cloth may result in damage to the printhead lens. CAUTION: To avoid the risk of electric shock, unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding. NOTICE: Do not use household cleaners or detergents, as they may damage the finish of the printer. NOTICE: Using a damp cloth to clean the interior may cause damage to your printer. Damage to the printer caused by not following the correct instructions for cleaning will not be covered under warranty.
Operator Panel Menus Menu List Paper Menu Reports Network/Ports Settings Menu List 1. From the menu list, use the Arrow buttons to scroll the main menu. 2 . Press the Select button . 3 . Press the Right Arrow button until the heading you want appears on the display, and then press the Select button . 4 . Use the Arrow buttons to scroll through the available menu items. 5 . When the setting you want appears on the display, press the Select button to save the setting. Paper Menu Main Menu Paper Menu Reports Network/Ports Settings Main Menu Mode Main Menu Mode Main Menu Paper Menu Default Source Tray * MP Feeder Manual Paper Manual Env Configure MP Cassette* Manual NOTE: The Cassette setting configures the multipurpose feeder as an automatic paper source.
Substitute SizeOff Statement/A5 Letter/A4 All Listed* Custom Types Custom Type (where x represents 1–6) Recycled Size/Type Tray MP Feeder Manual Paper Manual Envelope Duplex Paper Texture Plain* Card Stock Transparency Labels Bond Letterhead Preprinted Colored Paper Envelope Rough Envelope Light Paper Heavy Paper Rough/Cotton Recycled Custom Type (where x represents 1–6) Paper Weight Plain* Card Stock Transparency Labels Bond Letterhead Preprinted Colored Paper Envelope Rough Envelope Light Paper Heavy Paper
1. From the menu list, use the Arrow buttons to scroll the Paper menu. 2 . Press the Select button . 3 . Press the Right Arrow button until the heading you want appears on the display, and then press the Select button . 4 . Use the Arrow buttons to scroll through the available menu items. 5 . When the setting you want appears on the display, press the Select button to save the setting. *Factory default setting Rough/Cotton Recycled Custom Type (where x represents 1–6) Paper Loading Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Recycled Custom Type (where x represents 1–6) Universal Setup Units of Measure Portrait Width Portrait Height Feed Direction Paper Mode Main Menu From this menu:You can: Default Source Set a default paper source for all print jobs. Tray * MP Feeder Manual Paper Manual Env NOTE: The items on the default source varies depending on the device type and the attachments and/or supplies installed on it. Size and Type settings are configured for each of the listed Default Source option under Tray Configuration. Configure MP Determine when the printer selects paper from the multipurpose feeder and the mode of operation of the multipurpose feeder. Cassette*—Treats the multipurpose feeder like any other tray. If a print job requests a size or type that is only loaded in the multipurpose feeder, the printer pulls print media from the multipurpose feeder for the job.
*Factory default setting Manual—Treats the multipurpose feeder like a manual feed tray. Load Manual appears when a single sheet of print media needs to be inserted into the multipurpose feeder. NOTE: The Cassette setting configures the multipurpose feeder as an automatic paper source. Substitute Size Substitute a specified paper size if the requested paper size is not available. Off Statement/A5 Letter/A4 All Listed* Custom Types Specify the type of print media associated with each Custom Type available in the Paper Type menu. Custom Type (where x represents 1–6) Recycled Size/Type From this menu: You can: Tray Size Identify the default size for each source. A4* (non-US) A5 A6 JIS B5 Letter* (US) Legal Executive Folio Statement Universal NOTE: For more information, see Universal Setup . Tray Type Identify the type of print media loaded in each source. Plain* Card Stock Transparency Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Recycled Custom Type (where x represents 1–6) MP Feeder Size Identify the size of print media loaded in the multipurpose feeder. A4* (non-US) A5 A6 JIS B5 Letter* (US) Legal
Executive Folio Statement Universal NOTE: For more information, see Universal Setup . 7 3/4 Envelope 9 Envelope 10 Envelope B5 Envelope C5 Envelope DL Envelope Other Envelope MP Feeder Type Identify the type of print media loaded in the multipurpose feeder. Plain Card Stock Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Envelope Rough Envelope Light Paper Heavy Paper Rough/Cotton Custom Type (where x represents 1–6) NOTE: Custom Type 6 is the default paper type. Manual Paper Size Identify the size of print media loaded manually in the multipurpose feeder. A4* (non-US) A5 A6 JIS B5 Letter* (US) Legal Executive Folio Statement Universal NOTE: For more information, see Universal Setup . Manual Paper Type Identify the type of print media loaded manually in the multipurpose feeder. Plain* Card Stock Transparency Recycled Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton
*Factory default setting Custom Type (where x represents 1–6) Duplex Size Identify the size of print media loaded for integrated duplex printing. A4* Folio Duplex Type Identify the type of print media loaded for integrated duplex printing. Plain* Recycled Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type (where x represents 1–6) Manual Envelope Size Identify the envelope size being manually loaded. 7 3/4 Envelope 9 Envelope 10 Envelope* (US) B5 Envelope C5 Envelope DL Envelope* (non-US) Other Envelope Manual Envelope Type Identify the envelope type being manually loaded. Envelope* Rough Envelope Custom Type (where x represents 1–6) Paper Texture From this menu: You can: Plain Card Stock Transparency Labels Bond Letterhead Preprinted Colored Paper Envelope Rough Envelope Light Paper Heavy Paper Specify the relative texture of the print media loaded in a specific tray. Normal* Rough Smooth
*Factory default setting Rough/Cotton Recycled Custom Type (where x represents 1–6) Paper Weight From this menu: You can: *Factory default setting Plain Card Stock Transparency Labels Bond Letterhead Preprinted Colored Paper Envelope Rough Envelope Light Paper Heavy Paper Rough/Cotton Recycled Custom Type (where x represents 1–6) Identify the relative weight of the print media loaded in a specific tray and ensures that the toner adheres properly to the printed page. Light Heavy Normal* Paper Loading From this menu: You can: *Factory default setting Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Recycled Custom Type (where x represents 1–6) Determine whether 2-sided printing occurs for all jobs specifying a print media type. Duplex Off*
Reports Universal Setup From this menu:You can: *Factory default setting Units of Measure Specify the height, width, and feed direction of the Universal Paper Size. Inches* (US) Millimeters* (non-US) Portrait Width Set the portrait width of the universal media. 3–48 inches 76–1219 mm NOTE: If the width exceeds the maximum, the printer uses the maximum width allowed. NOTE: 12 inches is the US factory default setting. Inches can be increased in 0.01 -inch increments. NOTE: 305 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Portrait Height Set the portrait height of the universal media. 3–48 inches 76–1219 mm NOTE: If the height exceeds the maximum, the printer uses the maximum height allowed. NOTE: 19 inches is the US factory default setting. Inches can be increased in 0.01 -inch increments. NOTE: 483 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Feed Direction Specify the feed direction of the Universal Paper Size. Short Edge* Long Edge NOTE: Feed Direction only appears if the longest edge of the media is shorter than the Maximum Physical Width of the printer. Mode Mode Main Menu Reports Menu Settings Page Device Statistics Network Setup Page Profiles List Print Fonts Print Directory
1. From the menu list, use the Arrow buttons to scroll the Reports menu. 2 . Press the Select button . 3 . Press the Right Arrow button until the heading you want appears on the display, and then press the Select button . 4 . Use the Arrow buttons to scroll through the available menu items. 5 . When the setting you want appears on the display, press the Select button to save the setting. Asset Report From this menu: You can: Menu Settings Page Display information relating to: Current settings for each of the menu items for all menus Cartridge information List of installed options and features Device Statistics View information relating to: Job Information Supply Information Printer USB Direct NOTE: The details presented on this page vary for every device type. Network Setup Page List important print server information (e.g., hardware addresses, firmware revision level, protocol settings, etc.). The page displays specific details about the devices: Standard Network Card Integrated Network Option Settings TCP/IP IPv6 NOTE: The Compi: field that appears on this screen always displays in English, regardless of the value of the devices Display. Profiles List View profiles stored in the printer. Print Fonts Print a sample of all the fonts available for the printer language currently set in the printer. PCL Fonts PostScript Fonts Print Directory View a list of resources that are stored in the user area of the flash and disk options. NOTE: The Print Directory Page appears only when a non-defective flash option or a non-defective disk option is installed and formatted. Asset Report Manage the printers asset information (e.g., serial number, model name, etc.).