DELL 2330d User Manual

1.  From the menu  list, use the  Arrow buttons   to  scroll to  the Quality menu.
2 .  Press  the  Select button 
.
3 .  Press  the  Right Arrow  button 
 until the heading you want  appears on the display, and  then  press  the  Select button 
.
4 .  Use  the  Arrow buttons 
  to  scroll through the available  menu  items.
5 .  When  the setting  you want  appears on the display, press  the  Select button 
 to  save the setting.
Pixel  Boost
Toner Darkness
Enhance Fine Lines
Gray Correction
Brightness...

Use  the Utilities menu  to  troubleshoot printer problems.1.  From the menu  list, use the  Arrow buttons 
  to  scroll to  the Utilities menu.
2 .  Press  the  Select button 
.
3 .  Press  the  Right Arrow  button 
 until the heading you want  appears on the display, and  then  press  the  Select button 
.
4 .  Use  the  Arrow buttons 
  to  scroll through the available  menu  items.
5 .  When  the setting  you want  appears on the display, press  the  Select button 
 to  save the setting.
* Factory...

1.  From the menu  list, use the  Arrow buttons   to  scroll to  the PostScript menu.
2 .  Press  the  Select button 
.
3 .  Press  the  Right Arrow  button 
 until the heading you want  appears on the display, and  then  press  the  Select button 
.
4 .  Use  the  Arrow buttons 
  to  scroll through the available  menu  items.
5 .  When  the setting  you want  appears on the display, press  the  Select button 
 to  save the setting.
1 .  From the menu  list, use the  Arrow buttons 
  to  scroll to  the...

Font SourceSpecify the set  of fonts  used by the Font Name  menu  item.
Resident*
All
Font Name Identify a  specific  font and  the option where it  is stored.
Range:  R0* – R90
Symbol  Set Specify the symbol  set  for each  font name.
Default: 10U  PC-8
PCL  Emulation  Settings
Point  Size
NOTE:
 Only

 for PostScript
emulation and  typographic  fonts. Change the point  size for scalable  typographic  fonts.
1.00  – 1008.00  in increments of 0.25
12.00*
Pitch Assign  the font pitch  for scalable...

*Factory default setting 
 

Administrative Support
  Using the Embedded Web Server
  Locking the Operator Panel Menus Using the Embedded Web Server
  Creating an Administrative  Password
Using the Embedded Web Server
If  the printer is installed  on a  network,  the Embedded Web Server is available  for a  range of functions:
Configuring  printer settings
Checking the status of the printer supplies
Configuring  network settings
Creating a  password for certain  menus
Viewing reports
Restoring  the factory default settings
Viewing...

5.  Click   Submit  to  save the PIN.
To change  the PIN, click  Reset Form .
Creating an Administrative Password
Creating an administrative  password allows  a  system  support person to  password-protect printer settings.
To prevent  a  user  from  changing a  printer setting, the operator  panel should be locked and  an administrative  password should
be set. For  more  information, see Locking the Operator Panel Menus Using the Embedded Web Server
.
1 .  Open a  Web browser.
2 .  In the address bar,...

Installing Optional Hardware
  Installing the 550-Sheet Optional  Drawer
  Installing an Optional  Memory Card
Installing the 550-Sheet Optional Drawer
An optional  drawer attaches  under the printer. A  drawer consists of two parts:  a  tray  and  a  support unit. Your  printer supports
one  optional  drawer that  holds up  to  550 sheets  of paper.
1.  Turn the printer off.
2 .  Unpack the drawer,  and  remove any packing material.
3 .  Place  the drawer in the location you have  chosen  for your...

a.  Click   Start® Control  Panel .
b.  Double -click   Printers and Other  Hardware .
c .  Double -click   Printers and Faxes .
7 .  Right-click  the  Dell  2330d/2330dn Laser Printer  icon.
8 .  Click   Properties .
9 .  Click   Install Options .
10 . Click   Ask Printer .
11 . Click   OK.
12 . Click   OK,  and  then  close  the Printers folder.
Installing an Optional Memory Card
The  system  board has  one  connector  for an optional  memory card. The  printer can  support up  to  160 MB  for a...

4.  Unpack the memory card.
Avoid  touching the connection  points along the edge  of the card.
5 .  Align the notches on the bottom  of the card  with the notches on the connector.
6 .  Push the memory card  firmly into the connector  until the latches on both  ends of the connector   snap into place.
It may require some  force  to  fully seat  the card.
7 .  Ensure  that  each  latch  fits over the notch on each  end  of the card.
8 .  Close  the side  cover.
9 .  Turn the printer back  on.
10 . In...