DELL 2155cn User Manual

Dell Printer Configuration Web Tool229
Va l u e s :
E-Mail Alert
Purpose:
To configure detailed settings for the E-Mail Alert. This page can also be 
displayed by clicking the E-Mail Alert in the left frame.
Va l u e s :
Host NameSets the host name of the server computer.
WorkgroupSets the workgroup.
Maximum SessionsSets the maximum number of sessions.
Unicode SupportSets whether to notify the host name and workgroup name in 
Unicode characters during SMB transmission.
Auto Master ModeSets whether to...

230Dell Printer Configuration Web Tool
SMTP Login 
UserSets the SMTP login user. Up to 63 alphanumeric 
characters, periods, hyphens, underscores, and at 
symbols (@) can be used. If specifying more than 
one address, separate them using commas.
SMTP Login 
PasswordSets the SMTP account password using up to 31 
alphanumeric characters.
Re-enter SMTP 
Login PasswordConfirms the set SMTP account password.
POP3 Server 
Address
*1Sets the POP3 server address in IP address format 
of aaa.bbb.ccc.ddd or as a...

Dell Printer Configuration Web Tool231
Bonjour (mDNS)
Purpose:
To configure the detailed settings of Bonjour.
E-Mail Alert 
SettingsE-Mail List 1Sets acceptable e-mail 
addresses for the E-Mail Alert 
feature using up to 255 
alphanumeric characters.
Select Alerts for 
List 1Supplies AlertsSelect the check box to receive 
an E-Mail Alert for 
consumables.
Paper Handling 
AlertsSelect the check box to receive 
an E-Mail Alert for paper 
handling.
Service CallSelect the check box to receive 
an E-Mail...

232Dell Printer Configuration Web Tool
SNMP
Purpose:
To configure the detailed settings of SNMP.
Va l u e s :
SNMP v1/v2c
Purpose:
To edit the detailed settings of SNMP v1/v2 protocol.
To enter this page, click Edit SNMP v1/v2 Properties in the SNMP page.
Va l u e s :
Printer NameSets the printer name up to 63 alphanumeric characters and symbol 
sets. The original setting will remain valid if no input is made.
SNMP 
ConfigurationEnable SNMP 
v1/v2c 
ProtocolSelect the check box to enable the SNMP v1/v2c...

Dell Printer Configuration Web Tool233
Re-enter 
Community 
Name (Read 
only)
*1
Enters the community name to access (read only) 
data again to confirm it.
Community 
Name 
(Read/Write)
*1
Sets the community name to access (read and write) 
data using up to 31 alphanumeric characters.
The original setting will remain valid if no input is 
made. Characters entered for community name in 
the previous settings will not be displayed on the 
screen. The default Read/Write Community is 
private.
Re-enter...

234Dell Printer Configuration Web Tool
SNMP v3
Purpose:
To edit the detailed settings of SNMP v3 protocol.
To enter this page, click Edit SNMP v3 Properties in the SNMP page.
Va l u e s :
Trap 
Notification 1-4Trap Address 
Ty p e
Trap Address 
Port Number
NotifySelect the check boxes to notify trap occurrence. In 
this case, specify the IP address and IP socket in the 
following format:
IPv4
Specify the IP address and IP socket in the 
nnn.nnn.nnn.nnn:mmmmm format. Each section of 
nnn is a variable...

Dell Printer Configuration Web Tool235
Scan To PC
Purpose:
To specify the client when scanning data.
Va l u e s :
LLTD
Purpose:
To specify the maximum number of devices.
Administrator 
AccountAccount 
EnabledSelect the check box to enable the administrator 
account.
User NameEnters the user name of the administrator account.
Authentication 
PasswordSets the authentication password of the 
administrator account using 8 to 32 alphanumeric 
characters.
Re-enter 
Authentication 
PasswordConfirms the set...

236Dell Printer Configuration Web Tool
Va l u e s :
Wireless LAN
 NOTE: Wireless LAN feature is available only when the printer is connected 
using the wireless network.
Purpose:
To configure the detailed setting for the wireless network. 
To use the wireless adapter, be sure to disconnect the network cable.
 NOTE: Once wireless LAN is activated, wired LAN protocol will be disabled.
Va l u e s :
Maximum number of 
deviceSets the maximum number of device from 64 to 1,024.
Wireless 
SettingsSSIDSets the...

Dell Printer Configuration Web Tool237
Security 
SettingsEncryptionSelect the security method from the list.
No SecuritySets No Security to configure 
the wireless setting without 
specifying a security method 
from WEP, WPA-PSK, and 
WPA-Enterprise.
WEPSets the WEP to use through 
the wireless network.
WPA-
PSK(WPA2-
PSK)
*1, 2
Sets the WPA-PSK to use 
through the wireless network.
WEP EncryptionSelect the WEP key code from either Hex or Ascii.
WEP Key 1Sets the WEP key set used through the wireless...

238Dell Printer Configuration Web Tool
 NOTE: The optional wireless adapter supports WEP, WPA-PSK-TKIP, WPA-
PSK-AES, and WPA-PSK-AES.
Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) for the network feature and reboot 
the printer. You can also initialize NVRAM of the printer from Reset Defaults 
in the Printer Settings menu.
Va l u e s :
Security
The Security tab includes Set Password, LDAP Server, LDAP User 
Mapping, SSL/TLS, IPsec, 802.1x and IP Filter (IPv4).
Set Password
Purpose:...