DELL 2155cn User Manual

Dell Printer Configuration Web Tool219
SMB Port StatusDisplays the port status.
Host NameDisplays the host name.
WorkgroupDisplays the workgroup.
Maximum 
SessionsDisplays the maximum number of sessions.
Unicode 
SupportDisplays whether to notify the host name and 
workgroup name in Unicode characters during 
SMB transmission.
Auto Master 
ModeDisplays whether to enable the Auto Master Mode.
Encrypt 
PasswordDisplays whether to encrypt the password during 
SMB transmission.
Job Time-OutDisplays the job...

220Dell Printer Configuration Web Tool
E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP (Simple Mail Transfer 
Protocol/Post Office Protocol) used for the e-mail feature and E-Mail Alerts 
feature. In this page, you can only verify the settings of items. If you want to 
change the settings, go to the pages in the Print Server Settings tab.
Va l u e s :
SMB Client Connection 
Time-OutDisplays the connection time-out period.
SSL/TLS HTTP - 
SSL/TLS 
CommunicationDisplays the...

Dell Printer Configuration Web Tool221
E-Mail Server 
SettingsPort StatusDisplays the port status.
Primary SMTP 
GatewayDisplays the primary SMTP (Simple Mail Transfer 
Protocol) gateway.
SMTP Port 
NumberDisplays the SMTP port number.
E-Mail Send 
AuthenticationDisplays the authentication method for outgoing e-
mail.
POP3 Server 
AddressDisplays the POP3 (Post Office Protocol 3) server 
address.
POP3 Port 
NumberDisplays the POP3 port number.
Reply AddressDisplays the IP address of servers connected...

222Dell Printer Configuration Web Tool
Print Server Settings
The Print Server Settings tab includes the Basic Information, Port Settings, 
TCP/IP, SMB, E-Mail Alert, Bonjour (mDNS), SNMP, Scan to PC, LLTD, 
Wireless LAN, and Reset Print Server pages.
Basic Information
Purpose:
To configure basic information of the printer.
Va l u e s :
 NOTE: The Auto Refresh feature is effective for the contents of the top frame, 
Printer Status page, Job List page, and Completed Jobs page.
Port Settings
Purpose:
To...

Dell Printer Configuration Web Tool223
Ethernet*1Ethernet 
SettingsAutoDetects the Ethernet 
transmission rate and the duplex 
settings automatically.
10BASE-T Half-
DuplexSelects 10Base-T Half-Duplex 
as the default value.
10BASE-T Full-
DuplexSelects 10Base-T Full-Duplex 
as the default value.
100BASE-TX 
Half-DuplexSelects 100Base-TX Half-
Duplex as the default value.
100BASE-TX 
Full-DuplexSelects 100Base-TX Full-
Duplex as the default value.
1000BASE-T 
Full-DuplexSelects 1000Base-T Full-
Duplex as...

224Dell Printer Configuration Web Tool
 NOTE: The settings in the Port Settings page will be valid only when the printer 
is rebooted. When you change or configure the settings, click the Apply New 
Settings button to apply the new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer. 
Va l u e s :
TCP/IP 
SettingsIP ModeSets the IP mode.
Host NameSets the host name.
IPv4 IP Address 
ModeSets the method for acquiring the IP 
address. 
Manual IP...

Dell Printer Configuration Web Tool225
IPv6 Enable 
Stateless 
AddressSelect the check box to enable the stateless 
address.
Use Manual 
AddressSelect the check box to set the IP address 
manually.
Manual 
AddressSets the IP address. To specify an IPv6 
address, enter the address followed by a 
slash (/) and then 64. For details, consult 
your system administrator.
Manual 
Gateway 
AddressSets the gateway address.
DNS DNS Domain 
NameSets the DNS domain name.
IPv4 Get DNS 
Server Address 
from DHCPAllows...

226Dell Printer Configuration Web Tool
WINS WINS ModeAllows you to enable or disable the automatic setting of the 
primary and secondary WINS server addresses via DHCP.
WINS 
Primary 
ServerManually sets the primary WINS server address in 
xxx.xxx.xxx.xxx format when WINS Mode is not selected.
WINS 
Secondary 
ServerManually sets the secondary (backup) WINS server address 
in xxx.xxx.xxx.xxx format when WINS Mode is not 
selected.
LPD Connection 
Time-OutSets the connection time-out period from 1 to...

Dell Printer Configuration Web Tool227
To configure the IP Filter feature, enter an IP address to be filtered in the 
Address field and the Subnet Mask in the Address Mask field. Enter a numeric 
value between 0 and 255 in each field. * is appended to the current value.
IP Filter Setup Procedure
You can set up to a maximum of five items and the first item set takes priority. 
When setting multiple filters, enter the shortest address first followed by a 
slightly longer address, a longer address and so...

228Dell Printer Configuration Web Tool
1Click the first column of the Access List row 1.
2Enter 192.168.100.10 in the Address field and 

255.255.255.255 in the Address Mask field.
3Select Reject.
4Click the first column of the Access List row 2.
5Enter 0.0.0.0 in the Address field and 0.0.0.0 in the Address 
Mask
 field.
6Select Permit.
7Click Apply New Settings.
Enabling and Disabling Printing from Network Addresses
You can enable printing from the 192.168 network address and disable 
printing from the...