DELL 2130cn User Manual

To configure the IP Filter feature, enter an IP address to be filtered in the Address field and the Subnet Mask in the Address Mask field. Enter a numeric value 
between 0 and 255 in each field. * is appended to the current value.  
Setup Procedure  
You can set up to a maximum of five items and the first item takes priority. Enter the shortest address first before proceeding to the next longer address when 
setting multiple filters.  
The following section explains how the  IP Filter (IPv4)  operates....

Purpose:  
To configure detailed settings for NetWare.  
Values:  
   
E - Mail Alert  
Purpose:  
To configure detailed settings for E - Mail Alert. This page can also be displayed by clicking  E - Mail Alert  in the Left Frame.  
Values:  NetWare   Device 
Name * 1
  Specifies the printer name up to 47 alphanumeric characters.  
For PServer Mode, set the Print Server Name (Print Server Object Name). The original setting remains valid if no input is made.  
Active Mode   Displays the current mode for...

   
SNMP  
Purpose:  
To configure the detailed settings of SNMP.  
Values:  
   
SNMP v1/v2c  
Purpose:  
To edit the detailed settings of SNMP v1/v2c protocol.  
To enter this page, click  Edit SNMP v1/v2c Properties   in the  SNMP  page.  
Values:  
   
SNMP v3  
Purpose:  
To edit the detailed settings of SNMP v3 protocol.  
To enter this page, click  Edit SNMP v3 Properties   in the  SNMP  page.  
Values:  * 1
 Available when  POP before SMTP   for   E - Mail Send Authentication  is selected....

   
Other Features   
The  Other Features  tab includes  Set Password ,  SSL/TLS ,  IPsec ,  802.1x , and  Reset Print Server  pages.  
   
Set Password  
Purpose:  
To set or change the password that is required to access the printers setup parameters from the  Dell Printer Configuration Web Tool .  
Set the password of the operator panel from  Panel Lock  in the  Printer Settings . This page can also be displayed by clicking  Set Password  in the Left Frame.  
Values:  
   
SSL/TLS  
Purpose:  
To...

   
802.1x  
Purpose:  
To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer.  
Values:  
   
Reset Print Server  
Purpose:  
To initialize NVRAM (non - volatile RAM) for the network feature and reboot the printer. You can also initialize the printers NVRAM from  Reset Defaults  in the 
Printer Settings  menu.  
Values:  
   
Copy Printer Settings  
The  Copy Printer Settings  menu includes the  Copy Printer Settings  and  Copy Printer Settings Report  pages....

Purpose:  
To verify the histories of copying.  
   
Print Volume    NOTE:  The history is cleared by turning off the printer. The  Print Volume  menu includes the  Print Volume  and  Dell ColorTrack  pages.  
   
Print Volume   
Purpose:  
To verify the number of printed pages. This page can also be displayed by clicking  Print Volume  in the Left Frame.  
Values:  
   
Dell ColorTrack   
Purpose:  
To specify which users have access to color printing and to limit print volume per user.  
Values:...

   
Print User Settings (Delete User)   
Purpose:  
To delete the user entries registered on the  Edit Print User Registration  page. The following items are in the dialog box that appears when you click the 
Delete User  button on the  Edit Print User Registration  page.  
Values:  
   
Tray Settings  
Use the  Tray Settings  menu to set the paper size and type of paper loaded in the trays.  
Values:  
Back to Contents Page  
    Password   Displays the password associated with the user name in...

Back to Contents Page    
 Installing Optional Modules   
   Installing the Optional 250 - Sheet Feeder   
   Installing a Duplexer   
   Installing a Memory   
   Installing the Network Protocol Adapter   
   Installing and Configuring the Wireless Printer Adapter   
 
You can make the printer more functional by installing the options. This chapter describes how to install the printers options such as the duplexer and optional 
250 - sheet feeder.  
Installing the Optional 250 - Sheet Feeder...

 
   
7. Insert the standard 250 - sheet tray into the printer, and push until it stops.   
 
 
   
8. Reconnect all cables including the power cable into the back of the printer and turn on the printer.   
 
   
9. Print a printer settings page to verify the optional 250 - sheet feeder is installed correctly.   
 
   
When Using the Operator Panel   
a.   Press  Menu  button.   
 
b.   Press   button until  Report/List  appears, and then press    (Set)  button.   
 
c.   Printer Setting  is displayed....

c.   Press   button until the installed tray appears, and then press    (Set)  button.   
 
d.   Press   button until  Paper Type  appears, and then press    (Set)  button.   
 
e.   Press    button until the paper type for the installed tray appears, and then press    (Set)  button.   
 
f.   Confirm that the selected paper type is marked with an asterisk(*), and then press  Menu  button.   
 
     
11. If you installed the optional 250 - sheet feeder after installing the printer driver, update your...