DELL 2130cn User Manual

2. Remove all packaging from the duplexer.   
 
     
3. Push the side button and open the front cover.   
 
 
   
4. Remove the connector cap.   
 
 
   
5. Install the duplexer into the inside of the front cover.   
 
 
 
    NOTE:  Ensure that the duplexer is parallel to the front cover when action is being carried out.
NOTE:  Align the groove on the right tip of the duplexer to the projection on the front cover. Align the arrow mark on the left tip of the duplexer to 
the arrow mark on the front...

6. Fasten the duplexer by pushing firmly with your thumbs.   
 
 
   
7. Close the front cover.   
 
 
   
8. Turn on the printer.   
 
     
9. Print a printer settings page to verify that the duplexer is installed correctly.   
 
   
When Using the Operator Panel   
a.   Press  Menu  button.   
 
b.   Press   button until  Report/List  appears, and then press    (Set)  button.   
 
c.   Printer Setting  is displayed .  Press    (Set)  button.   
 
The printer settings page is printed.  
d.   Verify...

   
10. If you installed the duplexer after installing the printer driver, update your driver by following the instructions for each operating system. If the printer is 
on a network, update the driver for each client.   
 
   
For Windows Vista/Vista x64   
a.   Click  Start ®   Control Panel ®   Hardware and Sound ®   Printers .   
 
b.   Right - click the printer icon of the Dell 2130cn Color Laser Printer and select  Properties .   
 
c.   Click the  Options  tab, and then select  Get Information...

 
   
3. Remove the control board cover.   
 
 
   
4. With the connector of the memory toward the slot, insert the memory vertically into the slot.   
 
 
   
5. Push the memory into the slot firmly.   
 
 
   
6. Install the control board cover.   
  NOTE:  Take off the below edge of the control board cover by turning the control board cover on hinge in the above edge. Next, remove the control 
board cover by pulling it from the printer.
NOTE:  Ensure that the memory is firmly fixed in the slot and...

 
   
7. Close the control board cover and turn the screw clockwise.   
 
 
   
8. Turn on the printer.   
 
     
9. Print a printer settings page to verify that the memory is installed correctly.   
 
   
When Using the Operator Panel   
a.   Press  Menu  button.   
 
b.   Press   button until  Report/List  appears, and then press    (Set)  button.   
 
c.   Printer Setting  is displayed .  Press    (Set)  button.   
 
The printer settings page is printed.  
d.   Verify  Memory Capacity  listed in the...

a.   Click  Start ®   Control Panel ®   Hardware and Sound ®   Printers .   
 
b.   Right - click the printer icon of the Dell 2130cn Color Laser Printer and select  Properties .   
 
c.   Click the  Options  tab, and then select  Get Information from Printer .   
 
d.   Click  Apply , and then click  OK .   
 
e.   Close the  Printers  dialog box.   
 
   
For Windows Server 2008/Server 2008 x64   
a.   Click  Start ®   Control Panel ®   Printers .   
 
b.   Right - click the printer icon of the Dell...

   
1. Ensure that the printer is turned off and all the cables are unplugged including the power cable from the rear of the printer.   
 
     
2. Turn the screw on the control board cover in a counter - clockwise direction and open the cover.   
 
 
   
3. Remove the control board cover.   
 
 
   
4. Insert the network protocol adapter by aligning the two rectangular slots and the circular hole and ensure that it snaps into place.   
 
 
   
5. Install the control board cover.   
 
 
   
6. Close the...

 
   
7. Reconnect all cables including the power cable into the back of the printer and turn on the printer.   
 
     
8. Print a printer settings page to verify that the network protocol adapter is installed correctly.   
 
   
When Using the Operator Panel   
a.   Press  Menu  button.   
 
b.   Press   button until  Report/List  appears, and then press    (Set)  button.   
 
c.   Printer Setting  is displayed .  Press    (Set)  button.  
The printer settings page is printed.   
 
d.   Verify  Network...

Contents of Box  
 
   
Before Installing the Wireless Printer Adapter  
To install the Dell Wireless Printer Adapter, follow one of the methods;  
Either  
   
Video instructions (Recommended)   
   
1. Insert the Drivers and Utilities CD. The setup_assist.exe file launches automatically.   
 
     
2. Click the  How to Install Options  button on the  Easy Setup Navigator  window and follow on screen instructions.   
 
Or  
   
Paper instructions   
Refer to  Installing and Configuring the Wireless...

Installing the Wireless Printer Adapter  
   
1. Ensure that the printer is turned off and unplug all cables including the power cable from the rear of the printer.   
 
 
   
2. Use a USB cable and temporarily connect the square end to the back of your printer and the other end to your computer.   
 
   
3. Remove the cap from the wireless printer adapter socket.   
 
 
   
4. Insert the wireless printer adapter into the wireless printer adapter socket with adjusting two pins and a hook of the wireless...