DELL 1355cnw User Manual

Understanding the Printer Menus379
 NOTE: This item is displayed only when the printer is connected with a wireless 
network.
Reset Wireless (Dell 1355cnw Multifunction Color Printer only)
Purpose:
To initialize wireless network settings. After executing this function and 
rebooting the printer, all wireless network settings are reset to their default 
values.
 NOTE: This item is displayed only when the printer is connected with a wireless 
network.
TCP/IP
Purpose:
To configure TCP/IP settings. The...

380Understanding the Printer Menus
Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the 
printer is turned off and then on.
Va l u e s :
IPv4 Get IP 
AddressAutoIP*Automatically sets the IP address.
BOOTPUses BOOTP to set the IP address.
RARPUses RARP to set the IP address.
DHCPUses DHCP to set the IP address.
Pa n e lEnables the IP address entered on the operator 
panel.
IP AddressManually sets the IP address allocated to the printer.
Subnet MaskManually sets the...

Understanding the Printer Menus381
Initialize NVM
Purpose:
To initialize wired network data stored in NVM (non-volatile memory). After 
executing this function and rebooting the printer, all wired network settings 
are reset to their default values.
Fax Settings
Use the Fax Settings menu to configure the basic fax settings. 
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Receive Mode
Purpose:
To select the default fax receiving mode.
Va l u e s :
LLTD DisableDisables the...

382Understanding the Printer Menus
Auto Rec Fax
Purpose:
To set the interval at which the printer goes into the fax receive mode after 
receiving an incoming call. The interval can be specified within the range of 0 
to 255 seconds. The default is 0 second.
Auto Rec TEL/FAX
Purpose:
To set the interval at which the printer goes into the fax receive mode after 
the external telephone receives an incoming call. The interval can be 
specified within the range of 0 to 255 seconds. The default is 6 seconds....

Understanding the Printer Menus383
Ring Tone Volume
Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a 
telephone call through the internal speaker when Receive Mode is set to 
Telephone/Fax.
Va l u e s :
Line Type
Purpose:
To select the line type.
Va l u e s :
Tone/Pulse
Purpose:
To  s e l e c t  t h e  d i a l i n g  t y p e .
Va l u e s :
OffTurns off the volume of the line monitor.
LowSets the volume of the line monitor.
Medium*
High
OffTurns off the volume of the...

384Understanding the Printer Menus
Resend Delay
Purpose:
To specify the interval between transmission attempts within the range of 3 to 
255 seconds. The default is 8 seconds.
Redial Attempts
Purpose:
To specify the number of redial attempts to make when the destination fax 
number is busy, within the range of 0 to 9. If you enter 0, the printer will not 
redial. The default is 3.
Redial Delay
Purpose:
To specify the interval between redial attempts within the range of 1 to 15 
minutes. The default is 1...

Understanding the Printer Menus385
To receive a fax by pressing a remote receive code on the external telephone 
after picking up the handset of the telephone.
Va l u e s :
Remote Rcv Tone
Purpose:
To specify the remote receive code in two digits to start Remote Receive. 
Fax Header
Purpose:
To print the information of sender on the header of faxes.
Va l u e s :
Company Name
Purpose:
To set the name of sender to be printed on the header of faxes. Up to 30 
alphanumeric characters can be entered.
Fax...

386Understanding the Printer Menus
Va l u e s :
DRPD Pattern
Purpose:
To provide a separate number for faxing with a distinctive ring pattern.
Va l u e s :
Off*Does not attach a cover page to faxes.
OnAttaches a cover page to faxes.
 

Understanding the Printer Menus387
Pa t t e r n  1 - 7DRPD is a service provided by some telephone companies. DRPD 
Patterns are specified by your telephone company. The patterns 
provided with your printer are shown below:
Ask your telephone company which pattern you need to select to 
use this service. For example, Pattern 7 is the New Zealand 
FaxAbility distinctive ringing pattern: rings for 400ms, stops for 
800ms, rings for 400ms and stops for 1400ms. This pattern is 
repeated over and over again....

388Understanding the Printer Menus
Forward Settings
Purpose:
To set whether to forward incoming faxes to a specified destination.
Va l u e s :
Fax Fwd Number
Purpose:
To enter the fax number of the destination to which incoming faxes will be 
forwarded.
Prefix Dial
Purpose:
To select whether to set a prefix dial number.
Va l u e s :
Prefix Dial Num
Purpose:
To set a prefix dial number of up to five digits. This number dials before any 
auto dial number is started. It is useful for accessing the Private...