Land Rover Defender 90 110 Workshop Book 6 Supplement Rover
Have a look at the manual Land Rover Defender 90 110 Workshop Book 6 Supplement Rover online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 364 Land Rover manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
n 42$B DEFENDER ELECTRICAL EQUIPMENT I86 I ALTERNATOR Service Repair No. 86.10.02 24% 4. ,: .. Remove and refit 1. Disconnect the battery. 2. Remove the air cleaner, see operation 19.10.01. 3. Remove the intercooler top hose assembly to the inlet manifold. 4. Remove the intercooler bottom hose assembly to the compressor housing. 5. Slacken the adjustment strap pivot bolt. 6. Remove the adjustment strap clamp bolt. 7. Remove the alternator two pivot bolts. 8. Release the drive belt from the alternator pulley. Note, to renew the drive belt, the power assisted steering pump and air conditioning compressor drive belts must first be removed. 9. Disconnect the electrical leads and remove the alternator. Refitting 10. Connect the electrical leads to the alternator before placing it in position on the common bracket. 11. Secure the alternator with the two pivot bolts and nuts, but leave slack at this stage. 12. Fit the adjustment strap clamp bolt and leave slack. 13. Fit the drive belt to the pulleys. 14. Tension the drive belt by levering the altemator away from the engine, taking care not to damage the alternator, and then tighten the adjustment strap c!amp bok. The tensicn is correct when the belt can be deflected 12mm (0.5ins.I at the the mid-point of the longest run between the pulleys. 15. Tighten the adjustment strap pivot bolt and the altemator two pivot nuts and bolts. 17. Reconnect the battery, run the engine and recheck the fan drive belt tension. 97