Daewoo Frs 2021 Service Manual

CO DE:W SB S1-3
4. DIAGRAM
 4 -1 . W IR IN G  D IA G RAM  
- 41 -
 

 4-2. CIRCUIT WIRING DIAGRAM Main PCB
- 42 -  
 
 
 
 
 

Front PCB
- 43 -
 
 

 4-3. AIR FLOW DIAGRAM
- 44 -
Freezer 
Compartment
 
Refrigerator  
Compartment  
 

 4-4. REFRIGRANT CYCLE DIAGRAM
- 45 -
 
Welding Points    
5 %   
7 points  
 
 35 %   
5 points 
 
Flow of Refrigeration Cycle
 

5. DISASSSEMBLY AND ASSEMBLY
5-1. Replacing Freezer Parts
1) Exchanging F-lights
* Remove screw cap with a small tip (-) driver on the
  bottom of light cover
* Pull down the light cover smoothly to remove.
* Replacing F-lights.
  - Assembling order is the reverse of disassembling.
- 46 -
 

2) Ice Cubes Maker & Ice Cubes Case
3) Drying Case & Meat Case
4) Front Cover
* Pull forward Ice case and lift up a little to remove then pull Ice cub\
es maker.
* Pull forward and lift up a little like Ice case.
  - Fruit case, vegetable case and chilled case
    in Refrigerator  are the same way.
* At first remove the screw caps with a (-) driver.
* Unscrew three screws with a (+) dirver.
* Assembling order is the reverse of disassembling. In order to assemble\
,
  match front cover to the cabinet...

5) Freezer (Refrigerator) Pockets
6) F-Louver Parts Disassembling.
* Hold the middle and pull up slightly.
   (Assembling order is the reverse of disassembling.)
   - Ref Pockets are the same way.
* Open the door fully and remove the shelves.
* Remove screw cap on the bottom of light cover and
   unscrew two screws with a (+) driver to separate
   the light cover.  [Refer to 1) Exchanging F-lights]
* Seperate F-lights housing & Heater housing
   (Eva front cover) from the interior side terminals.
*...

7) Front Control Pannel
냉동실 MOTER HOUSING
SENSOR  HOUSING
* Separate sensor housing
   on the top of  F-louber C.
* Hold the bottom nose of cover and pull
   forward out smoothly.
* Insert a flat tip driver into the left down groove of panel frame and \
snap it out smoothly.
* Remove housing from F-PCB and screws on the board to change for a new \
one.
* Assembling is the reverse order of disassembling.
* Separate Moter Housing and remove three screws.
* In order to disassemble F-louver C, separate hook...

5-2. Replacing Refrigerator Parts
1) Deodorizer 
2) Top R-Light
* Turn deodorizer counterclockwise.
   (Assembling is the reverse order of disassembling.)
* Like F-lights, remove two screw caps at the bottom
   of light cover with a (-) driver.
* Unscrew two screws with a (+) driver.
* Pull down R-light cover a little to separate the hook
   and pull out forward smoothly.
* Replacing the bulb.
   (Assembling is the reverse order of disassembling.)
- 50 -