Daewoo Dwd Fd1411 Instruction Manual
Have a look at the manual Daewoo Dwd Fd1411 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Daewoo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 4. FUNCTION • Recommended programmes according to the laundry type • Pre Wash : If the laundry is heavily soiled, “Pre Wash” program is recommended. Pre Wash is available in Cotton and Synthetic programmes. • Rinse+ : Used to introduce an additional rinse, which may assist in removing traces of detergent residue. • Eco : By selecting Eco function, the water temperature is lowered and washing time is increased. So you can economise your consumption of heating energy. Fabric Type First check if laundry is machine washable.(white cotton, linen towel and sheets..) Colourfast garments (shirts, night dresses, pyjamas..) and lightly soiled white cottons (underwear..)60˚C (95˚C)Pre Wash Rinse+ Crease CareRating 40˚C (COLD, 30°C, 60°C)Pre Wash Rinse+ Crease CareRating Laundry type is the same as Cotton.60˚CPre Wash Rinse+ Crease CareRating Proper Temp.OptionMaximum Load Programme Cotton Eco Polyamide, Acrylic, Polyester40˚C (COLD, 30°C, 60°C)Pre Wash Rinse+ Crease CareLess than 1.5kg Synthetic Delicate laundry easily damaged (silk, curtains..)Cold (30°C, 40°C)Rinse+ Crease CareLess than 1.0kg Delicate Machine washable woollens with pure new wool only.Cold (30°C, 40°C)Rinse+ Crease CareLess than 1.0kg Wool “Hand wash” marked delicate and wool laundryCold (30˚C)Rinse+ Crease CareLess than 1.0kg Hand Wash Coloured laundry which is lightly soiled.30˚C (Cold, 40˚C)Rinse+ Crease CareLess than 1.0kg Quick 30
12 * COTTON PROGRAMME Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • ‘COLD’, ‘30’, ‘40’, ‘60’ and ‘95’ ˚C washing temperatures are selectable with the cotton programme. • ‘Prewash’, ‘Rinse+’, and ‘Crease Care’ wash options are selectable with this programme. Caution! • If you select washing temperature ‘95’ ˚C, some cold water is supplied before the drain of main wash. This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water instead of directly draining it. Therefore this is not a malfuction. (Be careful with the draining water, since it can be still hot although the temperature is lowered.) Put the laundry in to the drum. Then close the door. • In the detergent compartment, put the powder into the main wash and pre-wash sections. Softener should be be poured into the middle section of the compartment and be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. Select the ‘Cotton’ programme using the programme selection dial. • (If you press the Start/Hold button after pressing the power button without selecting a programme, the ‘Cotton’ program is selected as default program. • Water temperature ‘40’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected automatically. • If you want to change the water temperature, spin velocity or add wash options (Rinse+, Crease Care), press each button. Press Start/Hold button. • The washing machine will start operating by locking the door and supplying water. 1 2 3 4
13 * ECO PROGRAM Put the laundry in the drum. Then close the door. • In the detergent compartment, put the powder into the main wash and pre-wash sections. Softener should be poured into the middle section of the compartment and be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. Select the ‘Eco’ programme using the programme selection dial. • Water temperature ‘60’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected automatically. • If you want to change the spin velocity or add wash options (Rinse+, Crease Care), press each button. Press Start/Hold button. • The washing machine will start operating by locking the door and supplying 1 2 3 4 Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘60’ ˚C washing temperature is selectable with the Eco programme. • Only ‘Rinse+’ and ‘Crease Care’ of all wash options are selectable with this programme.
14 * SYNTHETIC PROGRAM Put the laundry in the drum. Then close the door. • In the detergent compartment, put the powder into the main wash and pre-wash sections. Softener should be poured into the middle section of the compartment and be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. Select the ‘Synthetic’ programme using the programme selection dial. • Water temperature ‘40’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected automatically. • If you want to change the water temperature, the spin velocity or add wash options (Prewash, Rinse+, Crease Care), press each button. Press Start/Hold button. • The washing machine will start operating by locking the door and supplying water. 1 2 3 4 Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘30’, ‘40’ and ‘60’ ˚C washing temperatures are selectable with the Synthetic programme. • 1400rpm of spin velocity is NOT selectable with Synthetic program • ‘Prewash’, ‘Rinse+’, and ‘Crease Care’ wash options are selectable with this programme. • The appropriate amount of laundry for Synthetic program is below 1.5kg.
15 * DELICATE PROGRAM Put the laundry in the drum. Then close the door. • In the detergent compartment, put the powder into the main wash section. Softener should be poured into the middle section of the compartment and be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. Select the ‘Delicate’ programme using the programme selection dial. • Water temperature ‘Cold’, spin ‘400’ rpm and rinse ‘2’ times are selected automatically. • If you want to change the spin velocity or add wash options (Rinse+, Crease Care), press each button. Press Start/Hold button. • The washing machine will start operating by locking the door and supplying water. 1 2 3 4 Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘Cold’, ‘30’°C and ‘40’°C washing temperature is selectable with the Delicate programe. • Only Rinse+ and Crease Care wash options are selectable with this option but 1000rpm and 1400rpm of spin velocity is NOT selectable with Delicate program. • The appropriate amount of laundry for Delicate program is below 1.0kg.
16 * WOOL PROGRAM Put the laundry in the drum. Then close the door. • In the detergent compartment, put the powder into the main wash section. Softener should be poured into the middle section of the compartment and be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. Select the ‘Wool’ programme using the programme selection dial. • Watertemperature ‘Cold’, spin ‘400’ rpm and rinse ‘2’ times are selected automatically. • If you want to change the spin velocity or add wash options (Rinse+, Crease Care), press each button. Press Start/Hold button. • The washing machine will start operating by locking the door and supplying water. 1 2 3 4 Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only the ‘Cold’, ‘30’°C and ‘40’°Cwater temperature is available with the Wool programme. • 1000rpm and 1400rpm of spin velocity is NOT selectable with the Wool programme in order to protect the clothing from damage. • Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with this programme. • The appropriate amount of laundry for the Wool programme is below 1.0kg. • Use only special detergent for wool. (Do not use more than the recommended amount of detergent for woollens as this may lead to too much lather in the wash.)
17 * HAND WASH Put the laundry in the drum. Then close the door. • In the detergent compartment, put the powder into the main wash section. Softener should be poured into the middle section of the compartment and be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. Select the ‘Hand Wash’ programme using the programme selection dial. • Water temperature ‘Cold’, spin ‘400’ rpm and rinse ‘3’ times are selected automatically. • If you want to change the water temperature, spin velocity or add wash options (Rinse+, Crease Care), press each button. Press Start/Hold button. • The washing machine will start operating by locking the door and supplying water. 1 2 3 4 Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘Cold’ and ‘30’ ˚C washing temperatures are available with the Hand Wash programme. • 1000rpm and 1400rpm of spin velocity is NOT selectable with this programme. • Only ‘Rinse+’ and ‘Crease Care’ wash options may be chosen with this programme. • Use Hand Wash programme for the laundry that is marked ‘Hand wash’ in the care label.
18 * QUICK 30 * SPIN ONLY Put the laundry in the drum. Then close the door. Press the Power button. • The LED shows only “--” and all Program Lights turn on. Select the spin speed by pressing Spin button. Press the Start/Pause button. • The washing machine will start operating by locking the door. 1 2 3 4 Put the laundry in the drum. Then close the door. • In the detergent compartment, put the powder into the main wash section. Softener should be poured into the middle section of the compartment and be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. Select the ‘Quick’ programme using the programme selection dial. • Water temperature ‘30’ ˚C, spin ‘800’ rpm and rinse ‘2’ times are selected automatically. • If you want to change the water temperature, spin velocity or add wash options (Rinse+, Crease Care), press each button. Press Start/Hold button. • The washing machine will start operating by locking the door and supplying 1 2 3 4 Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘Cold’, ‘30’ ˚C and ‘40’ ˚C washing temperatures are available with the Quick 30 programme. • Only ‘Rinse+’ and ‘Crease Care’ wash options are may be chosen with this programme.
19 MAINTENANCE Proper care of your washing machine can extend its life. This section explains how to care for your machine properly and safely. Cleaning your machine Winter storage or moving care Install and store your machine where it will not be subject to freezing temperatures as any water left n hoses, etc. may damage it. If you wish to store/move your machine during freezing weather, please take note of the following: Non-use or vacation care Operate your washing machine only when you are at home. If you are on vacation or your machine is not being used for an extended period of time, you should: • Unplug the power supply cord or turn off eletrical power to the washer. • Disconnect the water supply. This helps avoid accidental flooding (due to a water pressure surge) while you are away. Wipe up detergent, bleach, and other spills with a soft, damp cloth or sponge as they occur. Occasionally wipe the outside of the washer to keep its it looking like new.Clean interior with 250ml of chlorine bleach mixed with 500ml of detergent. Run washer through a complete cycle. Repeat this process if necessary. Exterior Interior • Disconnect from mains. • Disconnect and drain water inlet hoses. • Run the washing machine on a drain and spin setting (see page 10) for 1 minute. • Unplug the power supply cord.• Flush water pipes and hoses. • Reconnect water inlet hoses. • Reconnect to water supply. • Reconnect power supply cord. To winterize washer To use washer again Check all pockets for sharp or metal objects eg. keys, pins, clips, money, etc. as they may damage the interior of your machine. If any such items are found please do not rest/leave them on top of the machine.
20 HOW TO CLEAN THE FILTER Cleaning the water inlet filter • Clean the filter when water leaks from the water inlet. Cleaning the drain filter • This drain filter is used to screen foreign bodies such as threads, coins, pins, buttons etc.. • If the drain filter is not cleaned regularly (after every ten washes), drainage problems could arise. CAUTION: Be careful when draining if the water is hot. Cleaning the detergent case *After a while detergent and fabric softeners leave a deposit in the drawer: - It should be cleaned from time to time with a jet of running water. - If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out. - To facilitate cleaning, the upper part of the fabric softener compartment can be removed. *Detergent can also accumulate inside the recess which should be cleaned occasionally with a brush. *Once you have finished cleaning, replace the case and run a rinse cycle without laundry. 1Pull the power plug out before cleaning it.2Turn off the water supply to the washer and separate the inlet hose.3Pull the inlet filter out.4Remove the dirt from the inlet filter with a brush. 1. Open the lower cover(1) by using a coin. Remove the cap hose(2) to pull out the hose.2. Unplug the cap hose(2), allowing the water to flow out. At this time use a vessel to prevent water flowing on to the floor. When water does not flow any more, turn the pump filter(3) open to the left.3. Remove any foreign material from the pump filter(3). After cleaning, turn the pump filter clockwise and insert the cap hose(2) to the original place. Close the lower cover. 1 100 232 3