Daewoo Dwd Fd1411 Instruction Manual
Have a look at the manual Daewoo Dwd Fd1411 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Daewoo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
INSTRUCTION MANUAL DWD-FD1411 Washing Machine Instruction Manual CONTENTSPage A NOTE TO YOU Thank you for buying a DAEWOO appliance. DAEWOO washing machines are easy to use, save time, and help you manage your home better. This manual contains valuable information about how to operate and maintain your machine properly and safely. Please read it carefully. Economic wash system Using artificial intelligence, the washer uses minimum energy and water by selecting optimal water level and washing time. Low noise system The washing machine minimises the washing and spinning noises by sensing the amount of laundry. Child-Lock The Child-Lock system has been used to prevent children from pressing any buttons to change the programme during operation. PARTS AND FEATURES .................................................................................................................2 WASHING MACHINE SAFETY ........................................................................................................3 INSTALLATION INSTRUCTIONS ....................................................................................................4 INLET HOSE CONNECTION ...........................................................................................................5 ELECTRICAL REQUIREMENTS .....................................................................................................6 OPERATING YOUR WASHING MACHINE .....................................................................................7 THE FUNCTIONS OF THE CONTROL PANEL ...............................................................................9 WASHING PROCEDURE AND PROGRAME SELECTION ..........................................................10 MAINTENANCE .............................................................................................................................19 HOW TO CLEAN THE FILTER ......................................................................................................20 REMOVING STAINS ......................................................................................................................21 TROUBLE SHOOTING ..................................................................................................................22 SPECIFICATION ............................................................................................................................23
2 PARTS AND FEATURES The parts and features of your washer are illustrated on the page. Become familiar with all parts and features before using your washer. Accessories NOTE The drawings in the book may vary from your model model. They are designed to show the different features of all models covered by this book, therefore your model may not include all the features that are available. Hose drain Inlet hose Manual Cap holder ADJUSTABLE LEGS CONTROL PANEL DOOR DETERGENT COMPARTMENT INLET HOSE PUMP COVER POWER CORD HOSE DRAIN
3 Save these instructions Your safety is important to us. To reduce the risk of fire, electrical shock, or injury when using your machine adhere to the following basic precautions. Understanding your responsibilities • Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same wash. Hazardous fumes can form. • Unplug power supply cord before attempting to service your machine. • Do not wash fibreglass material. Small particles can stick to fabrics washed in subsequent loads and cause skin irritation. • Do not spray water on the control panel of the washer. It could cause fire or an electric shock. • In case of the dual valve model, with only the cold water inlet valve, connected and the water temperature selected as hot or warm, there may be water leakage from unconnected water inlet valve. • This appliance must be earthed. • Flammable fluids (dry-cleaning solvents, etc) should not be used or stored in or near your machine. Do not add flammable fluids to your wash. These substances give off vapours that can create a fire hazard or explosion. • Do not attempt to open the machine door after a cycle has started. • Do not tamper with the controls. • The appliance is not intended for use by young children or without supervision. • If the supply cord is damaged, it must be replaced by the manufacturer, or its service agent or a similarly qualified person in order to avoid a hazard. • If the appliance is connected to the power supply via an extension lead, it should not be positioned where it could be splashed by, or susceptible to, water.Please ... • Have only a qualified person install, repair, or replace parts on washer. • Ensure your washing machine is regularly maintained/serviced. • Position your washing machine where it will be protected from the weather and keep it where the temperature will not fall below freezing. • Do not install your machine at a place of extremely high humidity. It could cause an electric shock or a short circuit. • Your washing machine must be connected to the correct outlet, electrical supply, water supply, and drain supply. WASHING MACHINE SAFETY Read all instructions before using your machine
4 Removing transit bolts 1. Before operating the washer, remove the transit bolts(3ea) along with the rubber. • If the bolts are not removed, it may cause heavy vibration, noise and malfunction.2. Unscrew the 3 bolts with the 10mm hex wrench or spanner or cross-tip screwdriver. Keep the 3 bolts for a later time. • When the appliance is transported, transit bolts will be re-used. 3. Close the holes with the cap holders supplied. Location of washer • Check location where the machine will be installed. Make sure you have everything necessary for correct installation. • Do not place or store your washing machine below 0°C (32°F) to avoid any damage from freezing. • Never place/store laundry products on top of the machine. • Install the washer on the horizontal solid floor. If the washer is installed on an uneven floor, it could make considerable noise, vibrate severely and cause a malfunction. If the machine is not level, adjust the legs up or down for horizontal installation. • Ventilation openings must not be obstructed by carpeting when the machine is installed on a carpeted floor. • Leave some space (right & left : 2cm, rear : 10cm). • In case of built-in installation, the distance between top of the washer and bottom of upper plate should be at least 3mm. INSTALLATION INSTRUCTIONS Laundry Tub Washer approx. 2cmDrain Hose
5 The machine should be connected to the water mains using the the new hose sets supplied. NEVER reuse old hoses. If using only one water tap or if there is only one water inlet valve, connect the inlet hose to the cold water inlet valve. Caution: Be careful not to confuse hot water inlet and cold water inlet. For Ordinary Tap For Screw-Shaped Tap INLET HOSE CONNECTION 1Pull down the collar of the inlet hose to separate it from the water tap adapter.2Loosen the four screws properly in order to fit into water tap.3Fit the water tap adapter into the water tap and tighten the four screws evenly while pushing up the adapter so that the rubber packing can stick to the water tap tightly. 4Remove the tape, and screw tightly connector B into connector A.5Connect the inlet hose to the water tap adapter by pulling down the collar of the hose end.6Connect the inlet hose adapter of the hose to the water inlet of the washer by turning it clockwise until it is tight. • Please check the rubber packing is present inside the inlet hose adapter of the hose. 1Connect the inlet hose to the water tap by screwing the connector tightly.2Connect the connector- inlet supplied if necessary.3Connect the inlet hose adapter to the water inlet of the machine and turn it until tight. *Check the packing in the inlet TAPE Raccorclement B Raccorclement A Connector Connector Rubber Packing Hose ConnectorRubber Packing Hose Connector inlet Connector
6 ELECTRICAL REQUIREMENTS • An electrical earth is required on this machine • If it does not fit the outlet, have a proper outlet installed by a qualified electrician.• Don’t earth to a gas pipe. • Don’t change the power supply cord plug. • Check with a qualified electrician if you are not sure the machine is properly earthed. WARNING Recommended earthing method Electrical shock hazard : Failure to follow these instructions could result in death or serious injury. For your personal safety, this machine must be earthed. It is fitted with a supply lead (A) attached to an earthed plug (B). To prevent electric shock occurring, this machine must be plugged into the relevant earthed power socket (C). It is the personal responsibility and obligation of the customer to ensure that this is in place before the washing machine is installed.C B A Drain system • Never forget to install drain hose before operating your machine. • Open the packing box, and there is a drain hose inside the drum. • Connect the drain hose to the drain outlet at the back side of the machine. • The top of the washing machine must be at least 60cm high but no higher than 100cm from floor level. • When installing the drain hose to tub(sink), secure it tightly with string or a plastic strap. • Proper securing of the drain hose will protect the floor from flooding. • When the drain hose is too long, do not force it back into the machine as this will cause excessive noise. Level adjustment 1If the washer is installed on an unsuitable floor, it could make considerable noise, vibrate and cause a malfunction.
7 OPERATING YOUR WASHING MACHINE 2Adjust the level of the washing machine using the adjustable legs. • Please check if there is any gap between the four adjustable legs and the floor. • Turn the adjustable legs. adjust the level of the machine and make sure that is stable. • Adjust the fixing nuts tightly so that the washer maintains the adjustment. 3Make it sure that the washing machine does not move when you press down the four corners of the washers top plate. adjustable legFixing Nut NOTE There should be no instability of the machine when all the adjustable legs have been correctly balanced. To obtain the best washing results, you must operate your machine properly. This section gives you this important information. • Close zippers, snaps, and hooks to avoid snagging other items. Remove pin, buckles, and other hard objects to avoid scratching the machine interior. • Empty pockets and pull them inside out.• Turn down cuffs and turn synthetic garments inside out to avoid damaging the fibres. • Tie strings and sashes to avoid tangling. • Treat spots and stains. (See “Removing stains” on page 21) Preparing clothes for washing
8 • For best cleaning and wrinkle-free results, put clothes into the machine loosely so that they move easily in the water. • Load machine properly and select correct load size setting. Overloading and selecting a setting too small for the wash load can : - Cause poor cleaning - Increase wrinkling - Create excessive lint - Wear out items faster (because of damage to fibres)• Mix large and small items in each load. Load evenly to maintain washer balance. An unbalanced load can make the washer vibrate during spin. • Reduce wash time when using a small load size setting. Loads with only a few small items needs less wash time. • Use a large load size setting to reduce wrinkling with permanent press clothes and some synthetic garments. These items should have more room to move in the water than heavy items. (towels, jeans) Loading 1Detergent compartment2Adding fabric softener • If desired, pour liquid fabric softener into the dispenser using the amount recommended by the manufacturers. • Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener which could stain clothes. • Do not open the detergent case when water is supplied. • Avoid pouring fabric softener directly on the clothes. 3Please use only the powder detergent for the front loader washing machine. • Please use the proper amount of detergent in conformity with the instruction of the detergent manufacturer. • A use of a large amount of detergent more than the recommended amount can cause many soapsuds and the overload to the motor. In addition to, this will deteriorate the washing and rinse performance. Adding detergent • Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. • Separate dark colours from light colours, colourfast items from non-colourfast items. Sorting Soil (Heavy, Normal, Light) Separate clothes according to amount of soil. Colour (White, Lights, Darks) Separate white clothes from coloured clothes. Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately. Main wash Pre wash Fabric softener
9 Press this switch to turn the power on or off. Operation and temporary stop is repeated as it is pressed. When you want to change program in operating; press the “Start/Hold” button #Select the program that you want to change #press the “Start/Hold” button again. You can select the course you want, and each lamp is turned on when that course is selected.For the more detailed information, please refer to the page 11~18. It can be used to adjust temperature of water according to types of the load to be washed.As the button is pressed, temperature of water is selected by Cold #30˚C #40˚C #60˚C #95˚C By pressing the spin button, the spin speed can be chosen. Rinse Hold• Is selected by pressing the spin button repeatedly. This function leaves clothes in the machine; suspended in the water after a rinse without entering into spin. • To proceed through to a drain or spin, after the Rinse Hold function is completed, use spin button. Spin only• If you want only spin, you can operate spin only. (See page 18.) Crease Care• If you want to prevent crease, select this button with spin speed. Rinse+• Is used to add a rinse, which may assist in removing traces of detergent residue. • By selecting Rinse+ function, the rinse time and the rinse water are increased. Pre-Wash• The washer operates one additional wash and spin before the main wash. • If the laundry is heavily soiled, Pre-Wash course is effective. • Pre-Wash is available in Cotton and Synthetic programs. All courses have pre-set washing times, but Time Save decreases it to 10 minutes. Each time this button is pressed the watch icon is repeated on and off. When it is on, the Time Save function is set. Time Save is available in Cotton, Eco and Synthetic programs. It can be used to pre-engage time for wash. Use this function when you want to protect any accident occurring from handling of washer by a child.During an operation of washer, press ‘Time Save’ and ‘Time Delay’ buttons simultaneously. In Child Lock mode, no button functions except Power button. In Child Lock mode, press ‘Time Save’ and ‘Time Delay’ buttons simultaneously like setting Child Lock and Child Lock is cancelled. To change to the desirde program, while in Child Lock mode; 1. Press both the Time save and Time delay buttons together once again. 2. Press the Start/Hold button. 3. Select the desired program and press the Start/Hold button again. THE FUNCTIONS OF THE CONTROL PANEL * The Child Lock will be cancelled when power is off. Change the desired program
10 1. COTTON IS AUTOMATICALLY SELECTED WHEN THE POWER BUTTON IS PRESSED. • Press the Power button to start. • Press the Start/Hold button • Initial cycle: - Programme : Cotton - Wash : main wash - Rinse : 3 times - Spin : 800 rpm - Water temperature : 40˚C WASHING PROCEDURE AND PROGRAMME SELECTION 2. MANUAL SELECTION • Press the Power button to start • Select the cycle you want by turning the programme dial and pressing each button. • Press the Start/Hold button. 3. TIME DELAYED WASHING • A washing cycle may be programmed to finish up to 12 hours later. For example, should you wish to delay the wash so that it will finish in eight hours time: - Press the Time Delay Button * Each pressing of the button advances time delay by one hour. • Now the timer is set. • If you want to check the selected programme, press the “Start/Hold” button again. • Preparing washing before starting “Time Delay”; - Load laundry and close the door - Place the detergent and fabric softener in the detergent compartment. • To cancel the time delay, press the Power button. ajust to 8 select the program or manual