Daewoo Dt 42a1 Users Manual

							AV 2AV 1L -
O I D U A - R
O E D I V - S O E
D I V
AV 3
• N.B. :  Video input can be via scart cable S-Video lead or yellow phono jack.
The red and white plugs are for left and right audio to accompany
the yellow video lead or to be used with the S-Video lead to produce sound.
32
Watching a DVD ImageWatching a DVD Image
•  Component Input is
set to 480i/576i and
480p/576p mode.
•  Connect the cable
from the DVD Video
output (Y, Pb/Cb,
Pr/Cr) to the
Component Input at
the back of PDP, and
connect the cable
from DVD audio
output (Left, Right)
to the Audio Input at
the back of PDP.
Watching a 
DVD Image
Connect a DVD Player to the PDP.
• Prepare the AV cable.
•  Connect the DVD(Output) to the PDP(Component or Video Input) as shown 
below.
• When connecting to an external AV source, be sure to match the colours.
•  If using the scart cable for connection, put the ferrite core to the middle of 
the cable for preventing EMI.
1
DVD Video AudioS-Video Video/Audio
Ferrite Core
Press the Power Buttons
• Turn the PDP and the DVD ON.
2
Video/Audio
DVD DVD
 
						

							AV1 AV2
AV(S)3
Component 1   Component 2
33
NOTES:
1)  Y/Cb/Cr, which stands for component video DVD player’s
output can also be written as Y/B-Y/R-Y, Y/Pb/Pr depending on
the kinds of DVD model.
2)  The way of connecting the DVD to the PDP is as follows:
Y  Y Cb  Pb, B-Y, Cr  Pr, R-Y
3)  The DVD output can be Video, S-Video or Component Video
depending on the DVD model. There are various output
modes, so be sure to check when you purchase it.
4)  When connecting S-Video and Video simultaneously, only SVideo
will be displayed on the screen as it takes precedence.
Input Select
•  Select [Component 1 or Component 2,
AV1(Scart), AV2(Scart) or AV3(S-Video)] by
pressing the [COMPONENT ] or [AV ] button of
the remote control or the “INPUT SELECT” in
keypad of the PDP unit.
•  Each time you press the [COMPONENT ] or
[AV ] button, a different input mode appears.
The sequence is as follows:
3
Select the Desired Title and Function
•  Select the desired title and function by
using the remote control of the DVD.
4
COMPONENT
AV
• [COMPONENT] button
• [AV] button
  
						

							AV 2AV 1L - O I D
U A - R
O E
D I V - S
O E D I V
AV 3
34
Watching a VCR ImageWatching a VCR Image
•  Video can use either
the video terminal or
the S-video terminal.
Watching a
VCR Image
Connect a VCR to the PDP.
• Prepare the AV cable.
• Connect the Video(Output) to PDP(Video Input) as shown below.
•  If using the scart cable for connection, put the ferrite core to the middle of 
the cable for preventing EMI.
1
S-Video Video/Audio
Ferrite Core
Press the Power Buttons
Turn the PDP and the VCR ON.
2
Video/Audio
VCR
 
						

							AV1 AV2
AV(S)3
AV
35
NOTES:
1)  When connecting a VCR the S-Video terminal provides a better
image than the Video terminal.
2)  When connecting to the Video terminal, connect 3 colour AV
cables (video, left audio, right audio) to the PDP; for the SVideo
terminal, connect the Audio terminal (Left, Right) in the
same way, and connect the S-Video cable (sold separately).
3)  When connecting the Video terminal and the S-Video
simultaneously, the S-Video terminal is selected. This can be
checked by the [Recall] button of the remote control.
Input Select
•  Select [AV 1(Scart), AV 2(Scart) or AV 3(S-
Video)] by pressing the [AV ] button of the 
remote control or the “INPUT SELECT” in 
keypad of the PDP unit. 
•  Each time you press the [AV ] button, different 
input modes appear. 
The sequence is as follows:
3
Select the Desired Title and Function
*  Select the desired title and function
by using the remote control of the VCR.
4
  
						

							AV 2AV 1
L
- O I D U A
- R
O E D I V
- S
O E D I V
AV 3
36
Watching a Camcorder/Game Console ImageWatching a Camcorder/Game Console Image
•  Enjoy images recorded by
camcorder or the game 
console after connecting 
to the
Watching a
Camcorder/Game
Console Image
Connect a Camcorder/Game Console to the PDP.
• Prepare the AV cable.
• Connect the Video(Output) to the PDP(Video Input) as shown below.
• When connecting to an external AV source, be sure to match the colours.
•  If using the scart cable for connection, put the ferrite core to the middle of 
the cable for preventing EMI.
1
S-Video Video/Audio
Ferrite Core
Press the Power Buttons
•  Turn the PDP and the
Camcorder/Game Console ON.
2
Video/Audio
Game Console/Camcorder
 
						

							AV1 AV2
AV(S)3
AV
37
NOTES:
1)  When connecting the device, the S-Video terminal provides a
better image than the Video terminal.
2)  When connecting to the Video terminal, connect 3 colour AV
cables (video, left audio, right audio) to the PDP; for the SVideo
terminal, connect the Audio terminal (Left, Right) in the
same way, and connect the S-Video cable(sold separately).
3)   If connecting via component video, refer to “Watching a DVD
Image” on page 32-33.
Input Select
•  Select [AV 1(Scart), AV 2(Scart) or AV 3]
by pressing the [AV ] button of the
Remote Control or the “INPUT SELECT”
in keypad of the PDP unit.
•  Each time you press the [AV ] button,
different input modes appear. 
The sequence is as follows:
3
Select Function
•  Select the function by using the remote 
control of camcorder or game console.
4
  
						

							38
Connecting PC(15pin D-sub)Connecting PC(15pin D-sub)
•  This product
supports resolutions
of VGA, SVGA, XGA.
•  Before connecting a
PC to the PDP, be
sure to adjust the
resolution of the PC.
Connecting PC
Before Connecting to the PDP, Set the
Resolution of the PC.
•  Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen 
of the PC.
• Choose the SETTINGS tab in the DISPLAY menu.
• In the SETTINGS menu, select 640 x 480 or 800 x 600.1
Audio
Connect the PC to the PDP.
•  Prepare the PC cable (D-sub 15pin) and
the PC audio cable.
•  Connect the PC(Output) to the
PDP(Input) as shown below.
2
15 PIN D-sub
PC
 
						

							PC/DVI
PCDVI
• N.B. :  You cannot select PC or DVI if the
picture in picture mode is on.
39
NOTES:
1) The resolution of the PC monitor is the best at 640 x 480 ( VGA).
2)  If there is a [Vertical Frequency]setting menu in the [Display] 
menu of the PC, adjust the frequency to 60Hz.
3)  If the PC resolution is too high, it may be hard to read letters.
Select a suitable resolution.
4)  If the picture don’t fit with the size or position of the screen,
select the [Auto] function in the Screen Menu in order to make
fit automatically. Also, you can adjust the position of the picture
with [H.position] and [V.position] functions manually.
Press the Power Buttons.
• Turn on the PDP and the PC.
3
Input Select
•  Select [PC] by pressing the [PC/DVI] button
of the remote control or PDP unit.
•  Each time you press the [PC/DVI] button, 
a different input mode appears. 
The sequence is as follows:
4
Enjoy Dynamic Ultra Screen Monitor by
Using PC’s Keyboard or Mouse.
5
  
						

							DVI-D INPUT
40
Connecting PC(DVI)Connecting PC(DVI)
•  This product supports
resolution of VGA, SVGA,
XGA.
•  Before connecting a PC to
the PDP, be sure to adjust 
the resolution of PC.
•  This product is supported 
by Plug and Play only at 
DVI.
Connecting PC
Before Connecting to the PDP, Set the Resolution of 
the PC.
•  Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen
of the PC.
• Choose the SETTINGS tab in the DISPLAY menu.
• In the SETTINGS menu, select 640 x 480 or 800 x 600.1
Audio
Connect the PC to the PDP.
•  Prepare the DVI cable and the PC audio cable.
•  Connect the PC(Output) to the PDP(Input) as 
shown below.
2
DVI
PC
 
						

							PC/DVI
PCDVI
• N.B. :  You cannot select PC or DVI if the picture in 
picture mode is on.
41
NOTES:
1) The resolution of the PC monitor is the best at 640 x 480 ( VGA).
2)  If there is a [Vertical Frequency]setting menu in the [Display]
menu of the PC, adjust the frequency to 60Hz.
3)  If the PC resolution is too high, it may be hard to read letters.
Select a suitable resolution.
4) DVI input port receives only digital signal.
5)  Depending on the graphic card when plugged or unplugged the
DVI connection the screen may not display correctly.
Restart the computer if this happens.
Press the Power Buttons.
• Turn on the PDP and the PC.
3
Input Select
•  Select [DVI] by pressing the [PC/DVI button 
of the remote control or the Input button on 
the PDP unit.
•  Each time you press the [PC/DVI] button, 
a different input mode appears. 
The sequence is as follows:
4
Enjoy Dynamic Ultra Screen Monitor by 
Using PC’s Keyboard or Mouse.
5