Daewoo Dt 42a1 Users Manual

AV 2AV 1L -
O I D U A - R
O E D I V - S O E
D I V
AV 3
• N.B. :  Video input can be via scart cable S-Video lead or yellow phono jack.
The red and white plugs are for left and right audio to accompany
the yellow video lead or to be used with the S-Video lead to produce sound.
32
Watching a DVD ImageWatching a DVD Image
•  Component Input is
set to 480i/576i and
480p/576p mode.
•  Connect the cable
from the DVD Video
output (Y, Pb/Cb,
Pr/Cr) to the
Component Input at
the back of PDP, and
connect the...

AV1 AV2
AV(S)3
Component 1   Component 2
33
NOTES:
1)  Y/Cb/Cr, which stands for component video DVD player’s
output can also be written as Y/B-Y/R-Y, Y/Pb/Pr depending on
the kinds of DVD model.
2)  The way of connecting the DVD to the PDP is as follows:
Y  Y Cb  Pb, B-Y, Cr  Pr, R-Y
3)  The DVD output can be Video, S-Video or Component Video
depending on the DVD model. There are various output
modes, so be sure to check when you purchase it.
4)  When connecting S-Video and Video simultaneously, only...

AV 2AV 1L - O I D
U A - R
O E
D I V - S
O E D I V
AV 3
34
Watching a VCR ImageWatching a VCR Image
•  Video can use either
the video terminal or
the S-video terminal.
Watching a
VCR Image
Connect a VCR to the PDP.
• Prepare the AV cable.
• Connect the Video(Output) to PDP(Video Input) as shown below.
•  If using the scart cable for connection, put the ferrite core to the middle of 
the cable for preventing EMI.
1
S-Video Video/Audio
Ferrite Core
Press the Power Buttons
Turn the PDP and the VCR ON.
2...

AV1 AV2
AV(S)3
AV
35
NOTES:
1)  When connecting a VCR the S-Video terminal provides a better
image than the Video terminal.
2)  When connecting to the Video terminal, connect 3 colour AV
cables (video, left audio, right audio) to the PDP; for the SVideo
terminal, connect the Audio terminal (Left, Right) in the
same way, and connect the S-Video cable (sold separately).
3)  When connecting the Video terminal and the S-Video
simultaneously, the S-Video terminal is selected. This can be
checked by the...

AV 2AV 1
L
- O I D U A
- R
O E D I V
- S
O E D I V
AV 3
36
Watching a Camcorder/Game Console ImageWatching a Camcorder/Game Console Image
•  Enjoy images recorded by
camcorder or the game 
console after connecting 
to the
Watching a
Camcorder/Game
Console Image
Connect a Camcorder/Game Console to the PDP.
• Prepare the AV cable.
• Connect the Video(Output) to the PDP(Video Input) as shown below.
• When connecting to an external AV source, be sure to match the colours.
•  If using the scart cable for...

AV1 AV2
AV(S)3
AV
37
NOTES:
1)  When connecting the device, the S-Video terminal provides a
better image than the Video terminal.
2)  When connecting to the Video terminal, connect 3 colour AV
cables (video, left audio, right audio) to the PDP; for the SVideo
terminal, connect the Audio terminal (Left, Right) in the
same way, and connect the S-Video cable(sold separately).
3)   If connecting via component video, refer to “Watching a DVD
Image” on page 32-33.
Input Select
•  Select [AV 1(Scart), AV...

38
Connecting PC(15pin D-sub)Connecting PC(15pin D-sub)
•  This product
supports resolutions
of VGA, SVGA, XGA.
•  Before connecting a
PC to the PDP, be
sure to adjust the
resolution of the PC.
Connecting PC
Before Connecting to the PDP, Set the
Resolution of the PC.
•  Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen 
of the PC.
• Choose the SETTINGS tab in the DISPLAY menu.
• In the SETTINGS menu, select 640 x 480 or 800 x 600.1
Audio
Connect the PC to the PDP.
•  Prepare the PC cable...

PC/DVI
PCDVI
• N.B. :  You cannot select PC or DVI if the
picture in picture mode is on.
39
NOTES:
1) The resolution of the PC monitor is the best at 640 x 480 ( VGA).
2)  If there is a [Vertical Frequency]setting menu in the [Display] 
menu of the PC, adjust the frequency to 60Hz.
3)  If the PC resolution is too high, it may be hard to read letters.
Select a suitable resolution.
4)  If the picture don’t fit with the size or position of the screen,
select the [Auto] function in the Screen Menu in order to...

DVI-D INPUT
40
Connecting PC(DVI)Connecting PC(DVI)
•  This product supports
resolution of VGA, SVGA,
XGA.
•  Before connecting a PC to
the PDP, be sure to adjust 
the resolution of PC.
•  This product is supported 
by Plug and Play only at 
DVI.
Connecting PC
Before Connecting to the PDP, Set the Resolution of 
the PC.
•  Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen
of the PC.
• Choose the SETTINGS tab in the DISPLAY menu.
• In the SETTINGS menu, select 640 x 480 or 800 x 600.1
Audio...

PC/DVI
PCDVI
• N.B. :  You cannot select PC or DVI if the picture in 
picture mode is on.
41
NOTES:
1) The resolution of the PC monitor is the best at 640 x 480 ( VGA).
2)  If there is a [Vertical Frequency]setting menu in the [Display]
menu of the PC, adjust the frequency to 60Hz.
3)  If the PC resolution is too high, it may be hard to read letters.
Select a suitable resolution.
4) DVI input port receives only digital signal.
5)  Depending on the graphic card when plugged or unplugged the
DVI connection...