Daewoo Dt 42a1 Users Manual

42
PC and DVI Input Resolution Available in PDPPC and DVI Input Resolution Available in PDP
•  Depending on graphic card, problems like no signal detected or line noises can happen. If these problems happen, contact the 
graphic card company for help.
Resolution H Freq. (KHz) V Freq. (Hz)Remark DVI PC
640x400 37.861 85.080 VESA O
640x480 31.469 59.940 DOS O O
37.861 72.809 VESA O O
37.500 75.000 VESA O O
43.269 85.061 VESA O O
720x400 31.469 70.087 IBM O O
37.927 85.039 VESA O
800x600 35.156 56.250 VESA...

44
Selecting Picture ModeSelecting Picture Mode
Selecting Picture Mode
•  Press the [PICTURE MODE] on the
remote control.
•  While pressing the [PICTURE MODE] for
the first time, the current picture mode will 
be displayed.
1
Each Press of the Button Will Select 
One of Four Picture Modes.
•  Each time you press the button, a
different picture mode appears. 
The sequence used is as follows:2
•  Select the Picture mode
that is appropriate
depending on the kinds
of pictures, you enjoy.
Selecting 
Picture...

PR
PRV
O
L V
O
L
MENU
PREVPRSCREENSIZE
45
Customising PictureCustomising Picture
•  You can adjust the colour 
tone and brightness to your
preference.
Customising
Picture
Press the MENU Button.
• The MENU shown below will display on the screen.
1
Press the ▼PR▲ Button.
•  After selecting [Picture] by the “PR”, but-
tons, press the  “VOL
” button. Then the sub 
menu of [Picture] will be displayed.2
Select the User Mode.
•  Select [User] by the ”VOL” buttons in the 
[Mode].
3
Picture
Sound
Screen
Feature...

PR
PRV
O
L V
O
L
MENU
PREVPRSCREENSIZE
46
Select User Mode Adjustments
•  While you are in [Picture Mode – User], press the “PR” buttons 
to select a specific adjustment item.
4
Picture Condition Adjustments
• Press the “VOL” buttons to adjust the picture of your preference.
•  N.R. and CTI function adjust the noise reduction and color
resolution level of picture respectively.
5
Picture
Sound
Screen
Feature
InstallMode User 
Brightness  32
Contrast  48
Sharpness  32
Color  32
Colour Temp.  Normal
N.R. On...

14:9
LB(14:9)
LBS(14:9)
LB(16:9)
Auto16:94:3
Panorama
LBS(16:9)
• N.B. :  You cannot select screen size if the picture in
picture mode is on.
47
Adjusting ScreenAdjusting Screen
•  You can adjust screen size 
or aspect ratio as desired.
Adjusting with
Screen Size button
Press the SCREEN SIZE Button.
•  The current screen size will be displayed on 
the screen.
•  Each time you press the SCREEN SIZE button 
on the remote control, a different screen size 
appears. The sequence used is as follows in 
case of...

48
 Adjusting Screen in the MENU  Adjusting Screen in the MENU
•  You can adjust the screen in 
the menu.
Adjusting Screen
Press the MENU Button.
• The MENU screen as shown below will appear.
1
Press the “ ▼PR▲ ” Button.
• Press the ”PR” buttons to select ‘Screen’.
2
Picture
Sound
Screen
Feature
InstallMode 16 : 9 
H. Position.    32
V. Posi ti o n    32
Auto  
  
  
Move SelectExit
< In case of PC input >
Picture
Sound
Screen
Feature
InstallMode Normal 
Brightness  32
Contrast  48
Sharpness  32
Color...

PR
PRV
O
L V
O
L
MENU
PREVPRSCREENSIZE
49
Press the Volume “ VOL ” Buttons.
•  Press the Volume “VOL” buttons to enter the
sub menu “Screen”.
•  While you are in ‘Screen’ menu, press the ”
PR” or 
“PR
” button to select a desired item, and then, ad-
just the value by pressing the  “
VOL”  or  “VOL” 
3
NOTES:
1)   Screen Menu is different according to the input modes.
2)  Other Screen adjustments
< Under PC mode >
[H. Position] :  As the value increases, the screen moves to the 
right.
[ V. Position] : As...

Still
50
Press the “STILL” Button.
•  If you wish to freeze a picture, press the 
“STILL” button. You can still hear the sound.
•  Press “STILL” button again to cancel the 
“STILL” function.
1
   Watching a STILL Image      Watching a STILL Image
•  You can view still images 
with this function. However,
displaying the same images
such as still images for a 
long time may cause image 
burn.
Watching a
Still Image
NOTES:
1)  Displaying the same images such as still images for a long
time may cause image...

Main
Sub
Sub
SubSub
SubMain
Main
Main

< Using  „PR”  and  „VOL”  
buttons>
Pip Size
Adjusting the size of the 
sub-picture with
 “VOL” 
buttons.
Alpha Blend
The adjustment of alpha
blend allows the sub-picture
to be translucent.
The translucent rate is
controlled with 
“VOL” 
buttons.
•  PIP (Picture-in-Picture) and P-by-P(Picture-by-Picture) modes allow users to watch two pictures simultaneously.
POP mode is used in searching memorized 5 or 12 channels.
51
Watching Two Pictures SimultaneouslyWatching...