D-Link Router DIR-826L User Manual

							26D-Link DIR-826L User Manua\f
Section 3 - Confi\buration
Web-based Configuration Utility
Se\fect Admin from the drop-down menu and then enter 
your password. Leave the password b\fank by defau\ft.
To  access  the  confi\buration  uti\fity,  open  a  web-browser  such 
as  I nternet  Exp\forer  and  enter  the  IP  address  of  the  router 
(http://192.168.0.1).
Windows and Mac users may a\fso connect by typin\b
http://d\binkrouter in the address bar.  
						

							27D-Link DIR-826L User Manua\f
Section 3 - Confi\buration
Internet Conne\ftion Setup
C\fick Manua\b.Internet. Connection. Setup to confi\bure your 
connection manua\f\fy and continue to the next pa\be.
If you want to confi\bure your router to connect to the Internet 
usin\b the wizard, c\fick Internet.Connection. Setup.Wizard. 
You wi\f\f be directed to the Quick Setup Wizard. P\fease refer 
to pa\be 14.  
						

							28D-Link DIR-826L User Manua\f
Section 3 - Confi\buration
Se\fect Static.IP  to  manua\f\fy  enter  the  IP  settin\bs  supp\fied  by 
your ISP.
Advanced  Domain  Name  System  (DNS)  services  enhances  your 
Internet  performance  by  \bettin\b  you  the  information  and  web 
pa\bes  you  are  \fookin\b  for  faster  and  more  re\fiab\fy.  In  addition, 
it  improves  your  overa\f\f  Internet  experience  by  correctin\b  many 
common  typo  mistakes  automatica\f\fy,  takin\b  you  where  you 
intended to \bo and savin\b you va\fuab\fe time.
Disclaimer: D-Link makes no warranty as to the a\failability, reliability, 
functionality and operation of the Ad\fanced DNS ser\fice or its features.
Check  to  enab\fe  true  Gi\babit  routin\b.  This  wi\f\f  increase  the 
throu\bh-put of the WAN-LAN connectivity of the router.
Enter the IP address assi\bned by your ISP.
Enter the Subnet Mask assi\bned by your ISP.
Enter the Gateway assi\bned by your ISP.
The DNS server information wi\f\f be supp\fied by your ISP (Internet 
Service Provider.)
Maximum Transmission Unit - you may need to chan\be the MTU for optima\f performance with your specific ISP. 1500 is the 
defau\ft MTU.
My Internet Conne\ftion:
Enable Advan\fed DNS 
Servi\fe:
Enable True Gigabit 
Routing Conne\ftivity:
IP Address:
Subnet Mask:
Default Gateway:
DNS Servers:
MTU:
Manual Internet Setup
Stati\f (assigned by ISP)
Se\fect Static IP Address if a\f\f the Internet port’s IP information is provided to you by your ISP. You wi\f\f need to enter in the IP address, subnet mask, 
\bateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fie\fds must be in the appropriate IP form, which 
are four octets separated by a dot (x.x.x.x). \uThe Router wi\f\f not accept the IP address if it is not in\u this format.  
						

							29D-Link DIR-826L User Manua\f
Section 3 - Confi\buration
MAC Address:The defau\ft MAC Address is set to the Internet port’s physica\f interface MAC address on the Broadband Router. It is not recommended 
that you chan\be the defau\ft MAC address un\fess required by your ISP.  You can use the Copy.Your.PC’s.MAC. Address button to 
rep\face the Internet port’s MAC address with the MAC address of your Ethernet card.  
						

							30D-Link DIR-826L User Manua\f
Section 3 - Confi\buration
S e \f e c t  D ynamic.IP .(DHCP)  to   o b t a i n   I P   Ad d re s s   i n fo r m at i o n 
automatica\f\fy from your ISP. Se\fect this option if your ISP does not \bive 
you  any  IP  numbers  to  use. This  option  is  common\fy  used  for  cab\fe 
modem services.
Advanced Domain Name System (DNS) services enhances your Internet 
performance  by  \bettin\b  you  the  information  and  web  pa\bes  you 
are  \fookin\b  for  faster  and  more  re\fiab\fy.  In  addition,  it  improves  your 
overa\f\f Internet experience by correctin\b many common typo mistakes 
automatica\f\fy,  takin\b  you  where  you  intended  to  \bo  and  savin\b  you 
va\fuab\fe time.
Disclaimer:  D-Link  makes  no  warranty  as  to  the  a\failability,  reliability, 
functionality and operation of the Ad\fanced DNS ser\fice or its features.
Check to enab\fe true Gi\babit routin\b. This wi\f\f increase the throu\bh-put 
of the WAN-LAN connectivity of the router.
The Host Name is optiona\f but may be required by some ISPs. Leave 
b\fank if you are not sure.
Check  the  box  if  you  are  havin\b  prob\fems  obtainin\b  an  IP  address 
from your ISP.
Enter the Primary and secondary DNS server IP addresses assi\bned by your ISP. These addresses are usua\f\fy obtained automatica\f\fy 
from your ISP. Leave at 0.0.0.0 if you did not specifica\u\f\fy receive these from your ISP.
Maximum Transmission  Unit  -  you  may  need  to  chan\be  the  MTU  for  optima\f  performance  with  your  specific  ISP.  1500  is  the 
defau\ft MTU.
The defau\ft MAC Address is set to the Internet port’s physica\f interface MAC address on the Broadband Router. It is not recommended 
that you chan\be the defau\ft MAC address un\fess required by your ISP.  You can use the Copy. Your.PC’s.MAC. Address button to 
rep\face the Internet port’s MAC address with the MAC address of your Ethernet card.
My Internet 
Conne\ftion:
Enable Advan\fed 
DNS Servi\fe:
Host Name:
MAC Address:
Dynami\f (Cable)
Primary/Se\fondary 
DNS Server:
MTU:
Use Uni\fasting:
Enable True Gigabit 
Routing Conne\ftivity:  
						

							31D-Link DIR-826L User Manua\f
Section 3 - Confi\buration
Se\fect PPPoE.(Username/Password) from the drop-down menu.
Advanced  Domain  Name  System  (DNS)  services  enhances  your  Internet 
performance by \bettin\b you the information and web pa\bes you are \fookin\b 
for  faster  and  more  re\fiab\fy.  In  addition,  it  improves  your  overa\f\f  Internet 
experience by correctin\b many common typo mistakes automatica\f\fy, takin\b 
you where you intended to \bo and savin\b you va\fuab\fe time.
Disclaimer: D-Link makes no warranty as to the a\failability, reliability, functionality 
and operation of the Ad\fanced DNS ser\fice or its features.
Check to enab\fe true Gi\babit routin\b. This wi\f\f increase the throu\bh-put of 
the WAN-LAN connectivity of the router.
Se\fect Static.IP if your ISP assi\bned you the IP address, subnet mask, \bateway, 
and DNS server addresses. In most cases, se\fect Dynamic.
Enter the IP address (Static PPPoE on\fy).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the next box.
Enter the ISP Service Name (optiona\f).
Se\fect either A\bways-on, \fn-Demand, or Manua\b.
My Internet 
Conne\ftion:
Enable 
Advan\fed DNS 
Servi\fe:
Enable True 
Gigabit Routing 
Conne\ftivity:
Address Mode:
IP Address:
User Name:
Password:
Servi\fe Name:
Re\fonne\ft 
Mode:
Internet Setup
PPPoE (DSL)
Choose  PPPoE  (Point  to  Point  Protoco\f  over  Ethernet)  if  your  ISP  uses  a  PPPoE  connection. Your  ISP  wi\f\f  provide  you  with  a 
username and password. This option is typica\f\fy used for DSL services. Make sure to remove your PPPoE software from your 
computer. The software is no \fon\ber need\ued and wi\f\f not work throu\bh a router.  
						

							32D-Link DIR-826L User Manua\f
Section 3 - Confi\buration
Maximum 
Idle Time:
DNS 
Addresses:
MTU:
MAC Address:
Enter  a  maximum  id\fe  time  durin\b  which  the  Internet  connection  is  maintained  durin\b  inactivity. To  disab\fe  this  feature,  enab\fe 
Auto-reconnect.
Enter the Primary and Secondary DNS Server Addresses (Static PPPoE on\fy).
Maximum Transmission Unit - you may need to chan\be the MTU for optima\f performance with your specific ISP. 1492 is the defau\ft 
MTU.
The defau\ft MAC Address is set to the Internet port’s physica\f interface MAC address on the Broadband Router. It is not recommended 
that you chan\be the defau\ft MAC address un\fess required by your ISP.  You can use the Copy.Your.PC’s.MAC. Address button to 
rep\face the Internet port’s MAC address with the MAC address of your Ethernet card.  
						

							33D-Link DIR-826L User Manua\f
Section 3 - Confi\buration
Se\fect PPTP.(Username/Password) from the drop-down menu.
Advanced Domain Name System (DNS) services enhances your Internet 
performance  by  \bettin\b  you  the  information  and  web  pa\bes  you 
are \fookin\b for faster and more re\fiab\fy. In addition, it improves your 
overa\f\f Internet experience by correctin\b many common typo mistakes 
automatica\f\fy, takin\b you where you intended to \bo and savin\b you 
va\fuab\fe time.
Disclaimer:  D-Link  makes  no  warranty  as  to  the  a\failability,  reliability, 
functionality and operation of the Ad\fanced DNS ser\fice or its features.
Check to enab\fe true Gi\babit routin\b. This wi\f\f increase the throu\bhput 
of the WAN-LAN connectivity of the router.
Se\fect Static  if  your  ISP  assi\bned  you  the  IP  address,  subnet  mask, 
\bateway, and DNS server addresses. In most cases, se\fect Dynamic.
Enter the IP address (Static PPTP on\fy).
Enter the Primary and Secondary DNS Server Addresses (Static PPTP 
on\fy).
Enter the Gateway IP Address provided by your ISP.
Enter the Server IP provided by your ISP (optiona\f).
Internet Setup
PPTP
Choose PPTP (Point-to-Point-Tunne\fin\b Protoco\f ) if your ISP uses a PPTP connection. Your ISP wi\f\f provide you with a username 
and password. This option is typica\f\fy used for DSL services. 
My Internet 
Conne\ftion:
Enable 
Advan\fed DNS 
Servi\fe:
Enable True 
Gigabit Routing 
Conne\ftivity:
Address Mode:
PPTP IP Address:
PPTP Subnet 
Mask:
PPTP Gateway:
PPTP Server IP:  
						

							34D-Link DIR-826L User Manua\f
Section 3 - Confi\buration
Enter your PPTP username.
Enter your PPTP password and then retype the password in the next box.
Se\fect either A\bways-on, \fn-Demand, or Manua\b.
Enter  a  maximum  id\fe  time  durin\b  which  the  Internet  connection  is  maintained  durin\b  inactivity. To  disab\fe  this  feature,  enab\fe 
Auto-reconnect.
The DNS server information wi\f\f be supp\fied \uby your ISP (Internet Service Provider.)
Maximum Transmission Unit - you may need to chan\be the MTU for optima\f performance with your specific ISP. 1400 is the defau\ft 
MTU.
The defau\ft MAC Address is set to the Internet port’s physica\f interface MAC address on the Broadband Router. It is not recommended 
that you chan\be the defau\ft MAC address un\fess required by your ISP.  You can use the C\bone.Your.PC’s.MAC. Address button to 
rep\face the Internet port’s MAC address with the MAC address of your Ethernet card.
Username:
Password:
 
Re\fonne\ft 
Mode:
Maximum Idle 
Time:
DNS Servers:
MTU:
MAC Address:  
						

							35D-Link DIR-826L User Manua\f
Section 3 - Confi\buration
Se\fect L2TP.(Username/Password) from the drop-down menu.
Advanced Domain Name System (DNS) services enhances your 
Internet performance by \bettin\b you the information and web 
pa\bes you are \fookin\b for faster and more re\fiab\fy. In addition, 
it improves your overa\f\f Internet experience by correctin\b many 
common  typo  mistakes  automatica\f\fy,  takin\b  you  where  you 
intended to \bo and savin\b you va\fuab\fe time.
Disclaimer:  D-Link  makes  no  warranty  as  to  the  a\failability, 
reliability, functionality and operation of the Ad\fanced DNS ser\fice 
or its features.
Check  to  enab\fe  true  Gi\babit  routin\b.  This  wi\f\f  increase  the 
throu\bh-put of the WAN-LAN connectivity of the router.
Se\fect Static  if  your  ISP  assi\bned  you  the  IP  address,  subnet 
mask, \bateway, and DNS server addresses. In most cases, se\fect 
Dynamic.
Enter the L2TP IP addr\uess supp\fied by your ISP (Static on\fy).
Enter the Subnet Mask supp\fied by your ISP (Static on\fy).
Enter the Gateway IP Address provided by your ISP.
Enter the Server IP provided by your ISP (optiona\f).
My Internet 
Conne\ftion:
Enable 
Advan\fed DNS 
Servi\fe:
Enable True 
Gigabit Routing 
Conne\ftivity:
Address Mode:
L2TP IP Address:
L2TP Subnet 
Mask:
L2TP Gateway:
L2TP Server IP:
Internet Setup
L2TP
Choose L2TP (Layer 2 Tunne\fin\b Protoco\f) if your ISP uses a L2TP connection. Your ISP wi\f\f provide you with a username and 
password. This option is typica\f\fy used for DSL services.