D-Link Router DIR-100 User Manual
Here you can view all the pages of manual D-Link Router DIR-100 User Manual. The D-Link manuals for Router are available online for free. You can easily download all the documents as PDF.
Page 51
51D-Link DIR-100 User Manual Appendix A - Assigning a Static IP Address Assigning a Static IP Address (for Windows® 2000/XP) Note: Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses. If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address,...
Page 52
5D-Link DIR-100 User Manual Appendix A - Assigning a Static IP Address • Right-click on Local Area Connections. • Double-click Properties • Highlight Internet Protocol(TCP/IP) • Click Properties • Select Use the following IP address in the Internet Protocol (TCP/ IP) Properties window (shown below.)
Page 53
53D-Link DIR-100 User Manual Appendix A - Assigning a Static IP Address • Input your IP address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Address of 19 .168.0. , the other computers should have IP Addresses that are sequential, like 19 .168.0.3 and 19.168.0.4. The subnet mask must be the same for all the computers on the network.) • Input your DNS server addresses. (Note:...
Page 54
54D-Link DIR-100 User Manual Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default...
Page 55
![Page 55
55D-Link DIR-100 User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps bel\
ow:
Step 1
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3...](http://img.usermanuals.tech/thumb/20/102824/w300_index.html@nav=null&now=get&message=Downloading&file=DIR-100_Manual_en-54.png "Page 55
55D-Link DIR-100 User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps bel\
ow:
Step 1
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3...")
55D-Link DIR-100 User Manual Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps bel\ ow: Step 1 Windows® XP - Click on Start > Control Panel > Network Connections. Windows® 000 - From the desktop, right-click My Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3...