D-Link Dsh8 Manual

 Chapter 6: Command Sets 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  147 
QOS Commands Set 
 
Commands Level Description Example 
qos policy 
[weighted-fair|strict]  G  Select QOS policy scheduling switch(config)#qos policy weighted-
fair 
qos prioritytype 
[port-based|cos-
only|tos-only|cos-
first|tos-first] G  Setting of QOS priority type  switch(config)#qos prioritytype 
qos priority portbased 
[Port] 
[lowest|low|middle|high] 
G  Configure Port-based Priority switch(config)#qos priority portbased...

Chapter 6: Command Sets 
148  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
IGMP Commands Set 
 
Commands Level Description Example 
igmp enable G Enable IGMP snooping 
function  switch(config)#igmp enable 
Igmp-query auto 
G  Set IGMP query to auto 
mode  switch(config)#Igmp-query 
auto 
Igmp-query force 
G  Set IGMP query to force 
mode  switch(config)#Igmp-query 
force 
show igmp configuration 
P  Displays the details of an 
IGMP configuration.  switch#show igmp 
configuration 
no igmp 
G  Disable...

 Chapter 6: Command Sets 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  149 
MAC / Filter Table Commands Set 
 
Commands Level Description Example 
mac-address-table 
static hwaddr  
[MAC]  I  Configure MAC address 
table of interface (static).  switch(config)#interface fastEthernet 
2 
switch(config-if)#mac-address-table 
static hwaddr 000012345678 
mac-address-table filter 
hwaddr 
[MAC]
  G  Configure MAC address 
table(filter)   switch(config)#mac-address-table 
filter hwaddr 000012348678 
show...

Chapter 6: Command Sets 
150  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
SNMP Commands Set 
 
Commands Level Description Example 
snmp system-name  
[System Name] G  Set SNMP agent system 
name  switch(config)#snmp system-name 
l2switch 
snmp system-location   
[System Location] G  Set SNMP agent system 
location  switch(config)#snmp system-location 
lab 
snmp system-contact   
[System Contact] G  Set SNMP agent system 
contact  switch(config)#snmp system-contact 
where 
snmp agent-mode...

 Chapter 6: Command Sets 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  151 
Commands Level Description Example 
snmpv3 access context-
name  [Context Name ]  
group  
[Group Name ]  
security-level  
[NoAuthNoPriv|AuthNoPr
iv|AuthPriv]  
match-rule  
[Exact|Prifix]  
views  
[Read View Name] [Write
 
View Name] [Notify View 
Name]  G  Configure the access table 
of SNMPV3 agent  switch(config)#snmpv3 access 
context-name Test group G1 security-
level AuthPriv 
match-rule Exact views V1 V1 V1 
snmpv3...

Chapter 6: Command Sets 
152  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
Commands Level Description Example 
[Read View Name] [Write 
View Name] [Notify View 
Name] 
no snmpv3 mibview 
view  
[View Name]  
type  
[Excluded|Included]  
sub-oid  
[OID] G  Remove specified mibview 
table of SNMPV3 agent.  switch(config)#no snmpv3 mibview 
view V1 type Excluded sub-oid 1.3.6.1
 
 
  

 Chapter 6: Command Sets 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  153 
Port Mirroring Commands Set 
 
Commands Level Description Example 
monitor  
[RX|TX|Both]   I  Configure source port of 
monitor function  switch(config)#interface fastEthernet 
2 
switch(config-if)#monitor RX 
monitor rx 
[Port ID] G  Set RX destination port of 
monitor function  switch(config)#monitor rx 2 
monitor tx 
[Port ID] G  Set TX destination port of 
monitor function  switch(config)#monitor tx 3 
show monitor 
P Show...

Chapter 6: Command Sets 
154  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
802.1x Commands Set 
 
Commands Level Description Example 
8021x enable G 
 Use the 802.1x global 
configuration command to 
enable 802.1x protocols.   switch(config)# 8021x enable 
 
8021x system radiusip  
[IP address] 
 G  Use the 802.1x system 
radius IP global 
configuration command to 
change the radius server IP.  switch(config)# 8021x system radiusip 
192.168.1.1 
 
8021x system serverport 
[port ID] 
 G  Use the 802.1x...

 Chapter 6: Command Sets 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  155 
Commands Level Description Example 
8021x misc 
servertimeout   [sec.] 
  G  Use the 802.1x misc server 
timeout global configuration 
command to set the server 
timeout.  switch(config)#8021x misc 
servertimeout 20 
8021x misc maxrequest 
[number]
 
  G  Use the 802.1x misc max 
request global configuration 
command to set the MAX 
requests.  switch(config)# 8021x misc 
maxrequest 3 
8021x misc  
reauthperiod 
[sec.] 
  G  Use...

Chapter 6: Command Sets 
156  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
TFTP Commands Set 
 
Commands Level Description Defaults Example 
backup flash:backup_cfg G  Save configuration to TFTP and 
need to specify the IP of TFTP 
server and the file name of 
image.  switch(config)#backup 
flash:backup_cfg 
restore flash:restore_cfg 
G  Get configuration from TFTP 
server and need to specify the 
IP of TFTP server and the file 
name of image.  switch(config)#restore 
flash:restore_cfg 
upgrade...