D-Link Dsh8 Manual
Here you can view all the pages of manual D-Link Dsh8 Manual. The D-Link manuals for Switch are available online for free. You can easily download all the documents as PDF.
Page 141
![Page 141
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 137
Chapter 6
Command Sets
System Commands Set
Commands Level Description Example
show config E Show switch configuration switch>show config
show terminal P Show console information switch#show terminal
write memory P Save user configuration into
permanent memory (flash
rom) switch#write memory
system name
[System
Name] G Configure system name switch(config)#system name xxx
system location
[System
Location] G Set switch system...](http://img.usermanuals.tech/thumb/20/104258/w300_dsh8-manual-1523281021_d-140.png "Page 141
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 137
Chapter 6
Command Sets
System Commands Set
Commands Level Description Example
show config E Show switch configuration switch>show config
show terminal P Show console information switch#show terminal
write memory P Save user configuration into
permanent memory (flash
rom) switch#write memory
system name
[System
Name] G Configure system name switch(config)#system name xxx
system location
[System
Location] G Set switch system...")
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 137 Chapter 6 Command Sets System Commands Set Commands Level Description Example show config E Show switch configuration switch>show config show terminal P Show console information switch#show terminal write memory P Save user configuration into permanent memory (flash rom) switch#write memory system name [System Name] G Configure system name switch(config)#system name xxx system location [System Location] G Set switch system...
Page 142
![Page 142
Chapter 6: Command Sets
138 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Commands Level Description Example
reload G Halt and perform a cold
restart switch(config)#reload
default
G Restore to default switch(config)#default
admin username
[Username] G Changes a login username.
(maximum 10 words) switch(config)#admin username
xxxxxx
admin password
[Password] G Specifies a password
(maximum 10 words) switch(config)#admin password
xxxxxx
show admin
P Show administrator
information...](http://img.usermanuals.tech/thumb/20/104258/w300_dsh8-manual-1523281021_d-141.png "Page 142
Chapter 6: Command Sets
138 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Commands Level Description Example
reload G Halt and perform a cold
restart switch(config)#reload
default
G Restore to default switch(config)#default
admin username
[Username] G Changes a login username.
(maximum 10 words) switch(config)#admin username
xxxxxx
admin password
[Password] G Specifies a password
(maximum 10 words) switch(config)#admin password
xxxxxx
show admin
P Show administrator
information...")
Chapter 6: Command Sets 138 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual Commands Level Description Example reload G Halt and perform a cold restart switch(config)#reload default G Restore to default switch(config)#default admin username [Username] G Changes a login username. (maximum 10 words) switch(config)#admin username xxxxxx admin password [Password] G Specifies a password (maximum 10 words) switch(config)#admin password xxxxxx show admin P Show administrator information...
Page 143
![Page 143
Chapter 6: Command Sets
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 139
Commands Level Description Example
server
security ip [Index(1..10)]
[IP Address] G Set the IP security list switch(config)#security ip 1
192.168.1.55
show security P Show the information of IP
security switch#show security
no security
G Disable IP security function switch(config)#no security
no security http G Disable IP security of HTTP
server switch(config)#no security http
no security telnet
G...](http://img.usermanuals.tech/thumb/20/104258/w300_dsh8-manual-1523281021_d-142.png "Page 143
Chapter 6: Command Sets
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 139
Commands Level Description Example
server
security ip [Index(1..10)]
[IP Address] G Set the IP security list switch(config)#security ip 1
192.168.1.55
show security P Show the information of IP
security switch#show security
no security
G Disable IP security function switch(config)#no security
no security http G Disable IP security of HTTP
server switch(config)#no security http
no security telnet
G...")
Chapter 6: Command Sets GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 139 Commands Level Description Example server security ip [Index(1..10)] [IP Address] G Set the IP security list switch(config)#security ip 1 192.168.1.55 show security P Show the information of IP security switch#show security no security G Disable IP security function switch(config)#no security no security http G Disable IP security of HTTP server switch(config)#no security http no security telnet G...
Page 144
![Page 144
Chapter 6: Command Sets
140 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Port Commands Set
Commands Level Description Example
interface fastEthernet
[Portid] G Choose the port for
modification. switch(config)#interface fastEthernet
2
duplex
[full | half] I Use the duplex
configuration command to
specify the duplex mode of
operation for Fast Ethernet. switch(config)#interface fastEthernet
2
switch(config-if)#duplex full
speed
[10|100|1000|auto]
I Use the speed configuration...](http://img.usermanuals.tech/thumb/20/104258/w300_dsh8-manual-1523281021_d-143.png "Page 144
Chapter 6: Command Sets
140 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Port Commands Set
Commands Level Description Example
interface fastEthernet
[Portid] G Choose the port for
modification. switch(config)#interface fastEthernet
2
duplex
[full | half] I Use the duplex
configuration command to
specify the duplex mode of
operation for Fast Ethernet. switch(config)#interface fastEthernet
2
switch(config-if)#duplex full
speed
[10|100|1000|auto]
I Use the speed configuration...")
Chapter 6: Command Sets 140 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual Port Commands Set Commands Level Description Example interface fastEthernet [Portid] G Choose the port for modification. switch(config)#interface fastEthernet 2 duplex [full | half] I Use the duplex configuration command to specify the duplex mode of operation for Fast Ethernet. switch(config)#interface fastEthernet 2 switch(config-if)#duplex full speed [10|100|1000|auto] I Use the speed configuration...
Page 145
![Page 145
Chapter 6: Command Sets
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 141
Commands Level Description Example
giga ports,
and zero means no limit.
bandwidth out [Value] Set interface output
bandwidth. Rate Range is
from 100 kbps to 102400
kbps or to 256000 kbps for
giga ports,
and zero means no limit. switch(config)#interface fastEthernet
2
switch(config-if)#bandwidth out 100
Show bandwidth
I Show interfaces bandwidth
control switch(config)#interface fastEthernet
2...](http://img.usermanuals.tech/thumb/20/104258/w300_dsh8-manual-1523281021_d-144.png "Page 145
Chapter 6: Command Sets
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 141
Commands Level Description Example
giga ports,
and zero means no limit.
bandwidth out [Value] Set interface output
bandwidth. Rate Range is
from 100 kbps to 102400
kbps or to 256000 kbps for
giga ports,
and zero means no limit. switch(config)#interface fastEthernet
2
switch(config-if)#bandwidth out 100
Show bandwidth
I Show interfaces bandwidth
control switch(config)#interface fastEthernet
2...")
Chapter 6: Command Sets GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 141 Commands Level Description Example giga ports, and zero means no limit. bandwidth out [Value] Set interface output bandwidth. Rate Range is from 100 kbps to 102400 kbps or to 256000 kbps for giga ports, and zero means no limit. switch(config)#interface fastEthernet 2 switch(config-if)#bandwidth out 100 Show bandwidth I Show interfaces bandwidth control switch(config)#interface fastEthernet 2...
Page 146
![Page 146
Chapter 6: Command Sets
142 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Trunk Commands Set
Commands Level Description Example
aggregator priority
[1~65535] G Set port group system
priority switch(config)#aggregator
priority 22
aggregator activityport
[Group ID]
[Port Numbers] G Set activity port switch(config)#aggregator
activityport 2
aggregator group
[GroupID] [Port-list]
lacp
workp
[Workport] G Assign a trunk group with
LACP active.
[GroupID] :1~3
[Port-list]:Member port...](http://img.usermanuals.tech/thumb/20/104258/w300_dsh8-manual-1523281021_d-145.png "Page 146
Chapter 6: Command Sets
142 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Trunk Commands Set
Commands Level Description Example
aggregator priority
[1~65535] G Set port group system
priority switch(config)#aggregator
priority 22
aggregator activityport
[Group ID]
[Port Numbers] G Set activity port switch(config)#aggregator
activityport 2
aggregator group
[GroupID] [Port-list]
lacp
workp
[Workport] G Assign a trunk group with
LACP active.
[GroupID] :1~3
[Port-list]:Member port...")
Chapter 6: Command Sets 142 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual Trunk Commands Set Commands Level Description Example aggregator priority [1~65535] G Set port group system priority switch(config)#aggregator priority 22 aggregator activityport [Group ID] [Port Numbers] G Set activity port switch(config)#aggregator activityport 2 aggregator group [GroupID] [Port-list] lacp workp [Workport] G Assign a trunk group with LACP active. [GroupID] :1~3 [Port-list]:Member port...
Page 147
![Page 147
Chapter 6: Command Sets
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 143
VLAN Commands Set
Commands Level Description Example
vlan database P Enter VLAN configure mode switch#vlan database
Vlanmode
[portbase| 802.1q | gvrp]
V To set switch VLAN mode. switch(vlan)#vlanmode portbase
or
switch(vlan)#vlanmode 802.1q
or
switch(vlan)#vlanmode gvrp
no vlan V No VLAN Switch(vlan)#no vlan
Ported based VLAN configuration
vlan port-based grpname
[Group Name]
grpid
[GroupID]
port...](http://img.usermanuals.tech/thumb/20/104258/w300_dsh8-manual-1523281021_d-146.png "Page 147
Chapter 6: Command Sets
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 143
VLAN Commands Set
Commands Level Description Example
vlan database P Enter VLAN configure mode switch#vlan database
Vlanmode
[portbase| 802.1q | gvrp]
V To set switch VLAN mode. switch(vlan)#vlanmode portbase
or
switch(vlan)#vlanmode 802.1q
or
switch(vlan)#vlanmode gvrp
no vlan V No VLAN Switch(vlan)#no vlan
Ported based VLAN configuration
vlan port-based grpname
[Group Name]
grpid
[GroupID]
port...")
Chapter 6: Command Sets GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 143 VLAN Commands Set Commands Level Description Example vlan database P Enter VLAN configure mode switch#vlan database Vlanmode [portbase| 802.1q | gvrp] V To set switch VLAN mode. switch(vlan)#vlanmode portbase or switch(vlan)#vlanmode 802.1q or switch(vlan)#vlanmode gvrp no vlan V No VLAN Switch(vlan)#no vlan Ported based VLAN configuration vlan port-based grpname [Group Name] grpid [GroupID] port...
Page 148
![Page 148
Chapter 6: Command Sets
144 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Commands Level Description Example
vlan 8021q port
[PortNumber]
trunk-link tag
[TaggedVID List] V Assign a trunk link for VLAN
by port, if the port belong to
a trunk group, this
command can’t be applied. switch(vlan)#vlan 8021q port 3
trunk-link tag 2,3,6,99
or
switch(vlan)#vlan 8021q port 3
trunk-link tag 3-20
vlan 8021q port
[PortNumber]
hybrid-link untag
[UntaggedVID]
tag
[TaggedVID List] V Assign a...](http://img.usermanuals.tech/thumb/20/104258/w300_dsh8-manual-1523281021_d-147.png "Page 148
Chapter 6: Command Sets
144 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Commands Level Description Example
vlan 8021q port
[PortNumber]
trunk-link tag
[TaggedVID List] V Assign a trunk link for VLAN
by port, if the port belong to
a trunk group, this
command can’t be applied. switch(vlan)#vlan 8021q port 3
trunk-link tag 2,3,6,99
or
switch(vlan)#vlan 8021q port 3
trunk-link tag 3-20
vlan 8021q port
[PortNumber]
hybrid-link untag
[UntaggedVID]
tag
[TaggedVID List] V Assign a...")
Chapter 6: Command Sets 144 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual Commands Level Description Example vlan 8021q port [PortNumber] trunk-link tag [TaggedVID List] V Assign a trunk link for VLAN by port, if the port belong to a trunk group, this command can’t be applied. switch(vlan)#vlan 8021q port 3 trunk-link tag 2,3,6,99 or switch(vlan)#vlan 8021q port 3 trunk-link tag 3-20 vlan 8021q port [PortNumber] hybrid-link untag [UntaggedVID] tag [TaggedVID List] V Assign a...
Page 149
![Page 149
Chapter 6: Command Sets
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 145
Spanning Tree Commands Set
Commands Level Description Example
spanning-tree enable G Enable spanning tree switch(config)#spanning-tree enable
spanning-tree priority
[0~61440] G Configure spanning tree
priority parameter switch(config)#spanning-tree priority
32768
spanning-tree max-age
[seconds]
G Use the spanning-tree max-
age global configuration
command to change the
interval between messages
the...](http://img.usermanuals.tech/thumb/20/104258/w300_dsh8-manual-1523281021_d-148.png "Page 149
Chapter 6: Command Sets
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 145
Spanning Tree Commands Set
Commands Level Description Example
spanning-tree enable G Enable spanning tree switch(config)#spanning-tree enable
spanning-tree priority
[0~61440] G Configure spanning tree
priority parameter switch(config)#spanning-tree priority
32768
spanning-tree max-age
[seconds]
G Use the spanning-tree max-
age global configuration
command to change the
interval between messages
the...")
Chapter 6: Command Sets GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 145 Spanning Tree Commands Set Commands Level Description Example spanning-tree enable G Enable spanning tree switch(config)#spanning-tree enable spanning-tree priority [0~61440] G Configure spanning tree priority parameter switch(config)#spanning-tree priority 32768 spanning-tree max-age [seconds] G Use the spanning-tree max- age global configuration command to change the interval between messages the...
Page 150
![Page 150
Chapter 6: Command Sets
146 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Commands Level Description Example
stp-path-cost
[1~200000000] I Use the spanning-tree cost
interface configuration
command to set the path
cost for Spanning Tree
Protocol (STP) calculations. In
the event of a loop,
spanning tree considers the
path cost when selecting
an interface to place into the
forwarding state. switch(config)#interface fastEthernet
2
switch(config-if)#stp-path-cost 20
stp-path-priority...](http://img.usermanuals.tech/thumb/20/104258/w300_dsh8-manual-1523281021_d-149.png "Page 150
Chapter 6: Command Sets
146 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Commands Level Description Example
stp-path-cost
[1~200000000] I Use the spanning-tree cost
interface configuration
command to set the path
cost for Spanning Tree
Protocol (STP) calculations. In
the event of a loop,
spanning tree considers the
path cost when selecting
an interface to place into the
forwarding state. switch(config)#interface fastEthernet
2
switch(config-if)#stp-path-cost 20
stp-path-priority...")
Chapter 6: Command Sets 146 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual Commands Level Description Example stp-path-cost [1~200000000] I Use the spanning-tree cost interface configuration command to set the path cost for Spanning Tree Protocol (STP) calculations. In the event of a loop, spanning tree considers the path cost when selecting an interface to place into the forwarding state. switch(config)#interface fastEthernet 2 switch(config-if)#stp-path-cost 20 stp-path-priority...