Creative Studio 6 Manual

Quick Ref Right Click Options261
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 261   |  Page Quick Reference Sheets
 
Order Join  -  is used when a pattern has been separated into segments for
modification, and needs to be reconnected. The pattern segments are combined and
resequenced based on their relative positions. 
  Convert  
- can change the characteristics of patterns, boundaries and trims, making
the virtually interchangeable. Patterns can...

Getting Started with CreativeStudio®
262
   
 Fill Inside
 - is a special feature that uses boundaries and patterns to create a new
pattern that stitches in the background. The background fill pattern is modified to fit inside
the block, but not stitch over the oval frame. The resulting pattern can be used multiple
times. 
   
Fill Outside
 - is useful for stitching a background design behind an applique, if the
background design doesnt need to be bound. There is only one boundary needed for the
applique...

Quick Ref Right Click Options263
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 263   |  Page Quick Reference Sheets
 changing the rotation angle. 
* Shift All to 2 Points -  will relocate all of the patterns in the active quilt group. This makes
it much easier to design a whole cloth quilt, and stitch sections out individually. Using 2
points allows the squareup angle to be determined. 
* Relocate Project Origin  - is similar to shifting pattern(s)...

Getting Started with CreativeStudio®
264
5.13 Quick Ref Draw OptionsDesign It Yourself:   These Draw functions are the keyboard shortcuts referred to
in these DIY tips throughout this manual.    
A remarkable feature of CS is the ability to draw patterns from scratch, but the power
comes from the many choices available to make this very easy. 
Pattern Anchor  determines how a pattern will behave when it is being modified using the
re-sizing handles. 
The Pattern Anchor choices are:
* Edge (F9) The...

Quick Ref Draw Options265
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 265   |  Page Quick Reference Sheets
 
* Start clicking on the number boxes in the order you want them to stitch. The box
background color changes temporarily to white and the arrows change to navy blue, to
indicate which patterns  have already been changed. 
* Click on the arrows to reverse the start and end of the pattern. 
* Press Esc at any time to cancel. 
* Press F8 when...

Getting Started with CreativeStudio®
266
* Click as many points as needed to define the space.
* Press Escape to cancel the current boundary if needed.
* Right Click anywhere in the preview area to complete the boundary. CS will join the last
click with the first, enclosing the area. The point identified by the Right click is NOT one of
the boundary points.
* To exit from the Draw Boundary mode, press Esc or Alt +B again.
Alt +T  Draw Trim
* Click Draw and choose Draw Trim. 
* Start clicking trim points...

Quick Ref Draw Options267
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 267   |  Page Quick Reference Sheets
 
* With the mouse, click as many times as needed:
#1 will not appear on the screen immediately, but it is there.
#2 will show the location of #1, but does not begin to curve yet.
#3 will begin to show the curvature.
* When done drawing curves, Press Esc or Alt +C.
Alt
+ L Draw Sewable - Draw P2P Line.
To begin the line drawing, 
* Press Alt...

Getting Started with CreativeStudio®
268
If using a touch screen, touch the screen and move along smoothly, keeping pressure on
the screen. Releasing the pressure stops the drawing on the screen. Resume the pressure
and the drawing will resume.  
  
  
* To exit from the Draw Freehand mode, press Escape, or Alt +F , or right click the screen.  
Alt
+ M   Measure on the screen
Use the mouse to measure objects that are on the screen. The measurements will be
displayed in a dialog box at the bottom of the...

Quick Ref Record Patterns269
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 269   |  Page Quick Reference Sheets
 
5.14 Quick Ref Record Patterns
Feature: Record mode  (using Regulated Sewing feature)
The Record Mode is a subset of the Regulated Sewing feature. All the functions in
Regulated Sewing work the same way when the Record mode is active. Recording is
possible without the belts being engaged. The belts need to be engaged when stitching the...

Getting Started with CreativeStudio®
270
5.15 Quick Ref Text Patterns
Feature: Creating Text Patterns 
Steps to follow:
1.   Right Click in an open area of the preview area. 
2.  Click on Text Property in the dialog box that appears.
3.  Click in the text box and type your message. Each message is a pattern that does
NOT do word-wrap, but the text patterns can be divided to simulate word wrap. 
4.   Click on Place Text when done, and the Font dialog box appears. 
5.  Choose the font style you like. See...