Creative Studio 6 Manual

Quick Ref Icons Shortcuts241
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 241   |  Page Quick Reference Sheets
 
Feature Specific Shortcuts:
Feature :
KeySeq
What it will do: 
Measure Rightü
Transfer the measurement. Right click destination field, click on the number to
xfer.
F1 Help
F2 Virtual Stitchout - checks the path of a new pattern.+ to speed up, - to slow
down.
F5 Refresh Screen, resets stitcher connection and takes time - use only if...

Getting Started with CreativeStudio®
242
5.2 Quick Ref Regulated
Feature: Regulated    Baste 
  Constant Speed  
  sewing
There are three choices for the regulated stitching process: Original, Plus and Smooth.
Constant Speed and Baste have their own icons but the screens and the process of
stitching are the same as Regulated Sewing. Constant Speed runs the stitcher without a
stitch regulator. 
Baste is essentially a repeated single stitch.  The basting stitch is a long stitch and is usually
temporary. It...

Quick Ref Regulated243
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 243   |  Page Quick Reference Sheets
 
Additional Functions:  These functions (light blue buttons) are initiated by using a 2-button
sequence; press and hold the Shift button and then press the second button.   
Flip Chan Lock
 - Changes the current angle.
* If Radiating Lines is not checked, this will change the current angle to whatever the Flip Angle is set at. To flip the angle,...

Getting Started with CreativeStudio®
244
5.3 Quick Ref Single Block
Feature: Single Block   
 
(using Boundary and Pattern_to_Boundary features)
Step 1:   Define the Boundary 
 
Boundaries are used in many of the CS techniques. They might be required by a technique
(such as defining the quilting surface of an E2E design) or used as a convenient reference
for guiding the placement of patterns. Either way, they synchronize the quilt top with the
screen image. 
* Click on the Boundary icon to begin defining...

Quick Ref Single Block245
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 245   |  Page Quick Reference Sheets
 
When a pattern is moved into a boundary, it will be aligned to the baseline so if it slopes up
(or down) the pattern will be rotated accordingly. The slope is displayed in the Selected
Pattern Rotation field of the details.
* The Preview area is focused on the pattern most recently used. To see all patterns and
boundaries, click View All...

Getting Started with CreativeStudio®
246
5.4 Quick Ref Borders and Corners
Feature: Borders and Corners   
    
   
Using Border / Corner and Repeat Patterns features
Steps to follow for corners and borders:
1.  Select the patterns, choosing the corner first, hold the Ctrl, choose the border next.
2.  Click on the Border_Corner icon. CS prompts for outer border boundaries: Click (UL, UR,
LR, LL corners).  CS prompts for Inner border (UL, UR, LR, LL corners). 
3.  Adjust the settings, choosing a corner...

Quick Ref Borders247
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 247   |  Page Quick Reference Sheets
 
5.5 Quick Ref Borders
Feature: Borders ( Repeat Pattern - without corner patterns)      
Steps to follow for borders:
1.  Measure the top border height first and determine the height of the pattern. (Maximum
border size less margins). 
2.  Measure the top border width next, using the border seamline as the baseline. Be sure to
measure in the...

Getting Started with CreativeStudio®
248
5.6 Quick Ref Panto using Repeats
Feature: Pantograph (E2E) using Repeat Patterns
Background patterns (pantographs) are stitched using the Repeat Pattern features
to control the size and positioning, It uses Relocate for alignment after rolling the
quilt. 
Assumptions:  The machine is threaded, bobbins wound, belts engaged and
patterns have been added to the project. 
Prep Step #1.)
 Measure the quilt length and width accurately before loading the
quilt. 
Prep...

Quick Ref Panto using Repeats249
Gammill, Inc. | 2015             M-S-0001 - CreativeStudio 6.0 User Manual -  Rev 00                 249   |  Page Quick Reference Sheets
 
Select the last row quilted, Right Click these patterns.
· Choose Relocateand Choose Shift All to 2 Points.  
· A dialog box appears, giving instructions.
· Click Yes button to remove the dialog box.
· Use the mouse to click 2 Control Points on the screen. 
· Another dialog box appears, with more instructions.
7.  Now you will...

Getting Started with CreativeStudio®
250
5.7 Quick Ref Panto using E2E
Feature: Edge to Edge (E2E)  
  
Assumptions:  
Prep Step #1.)
 Measure the quilt length and width accurately before loading the quilt. If you
need to stitch off the edge of the quilt, increase your total quilt length. If you are leaving a
margin at the top and bottom, be sure to reduce your total quilt length by this amount. Also it
is a good idea to reduce the length a little to accommodate shrinkage caused by the quilting.
This...