Creative 2 Owners Manual

10:5
Files & Folders
6
9
8
/RDGDÀOH

will be loaded to the appropriate window.
If you want to open several designs at one time, 
click on the ones you want to open. Long touch 
on the last one. All the designs will open in 
Embroidery edit.
Open a folder
To open a folder in Files & Folders, long touch the 
folder. The contents of the folder will be displayed 
in the center window. 
Move up one IROGHUOHYHO
Use the move up one folder level icon to step up 
through the levels of folders. You can step...

10:6Files & Folders
18192021
22
23
2UJDQL]H
Create a QHZIROGHU
Touch the create new folder icon (18) to create a 
new folder. A pop-up opens where you can enter a 
name for your folder.
5HQDPHDÀOHRUIROGHU
Select the folder you want to rename, then touch 
this icon to a open a pop-up where you can enter a 
QHZQDPH8VHWKLVLFRQIRUUHQDPLQJÀOHVDVZHOO
0RYHDÀOHRUIROGHU

another place.

IROGHUZKHUH\RXZDQWWRSODFHWKHÀOHRUIROGHU...

10:7
Files & Folders
Common Files & Folders pop-ups
Audio preview application
You can listen to a sound when browsing Files & 

When selecting a VRXQGÀOHLQ)LOHV	)ROGHUVLW
will open in the audio preview application. Touch 
the start icon to play the sound. 
Note: You can only play PCM encoded :$9ÀOHV)RU

ZLOOQRWVXSSRUWFRPSUHVVHGVRXQGÀOHV
HOHWHÀOHRUIROGHU

10:8Files & Folders
6\VWHPEXV\
:KHQWKHPDFKLQHLVORDGLQJVDYLQJPRYLQJÀOHV
or anything that takes time, an hour glass is shown. 
,QYDOLG

Maintenance 

11:2
B
A
D
Maintenance
&OHDQLQJWKHPDFKLQH
To keep your sewing machine operating well, clean it 
often. No lubrication (oiling) is needed.
Wipe the exterior surface of your machine with a soft 
cloth to remove any dust or lint built up.
Note: Use of cleaners or solvents on the machine can cause 
damage to the plexifront. Clean only with a soft dry cloth.
Wipe the PFAFF
® creative™ Color Touch Screen with a 
clean, soft and damp cloth. 
&OHDQLQJWKHbobbin area
 
Note: Lower the feed dogs by pressing...

11:3
Maintenance
3UREOHPFDXVH 5HPHG\
General problems
Bobbin alarm does not work? Clean lint from bobbin area and use only the original 
PFAFF® bobbins approved for this model.
Thread snips does not cut the thread? Remove needle plate and clean lint from bobbin area. 
Enable automatic thread snips in the Settings menu.
Fabric does not move? Make sure that machine is not set in free-motion mode. 
See chapter 4.
Wrong stitch, irregular or narrow stitch? Deactivate twin needle or stitch width safety in...

11:4Maintenance
Are you using poor thread with slubs or thread 
which has become dry?Change to a new higher quality thread purchased from 
an authorized PFAFF® dealer.
Is a correct spool cap used? Attach a spool cap of the right size for the actual thread 
spool.
Is the best spool pin position used? Try a different spool pin position (vertical or 
horizontal).
Is the needle plate hole damaged? Change the needle plate.
Bobbin thread breaks
Did you insert the bobbin properly? Check the bobbin thread.
Is...

Index
11:5
Index
1/4” quilting foot with IDT™ system ........................... 1:11
3-dimensional view .................................................. 8:10, 9:6
A
Accessories ....................................................................... 1:10
Accessory tray ............................................................ 1:9, 2:3
Action indicator ............................................................... 2:14
ActivStitch
™ Technology ................................... 3:12, 4:7, 9:5
Add a...

Index11:6
Create appliqué ............................................................... 8:15
Create a sequence .............................................................. 5:3
creative sensation
™ pro II Embroidery collection ...... 1:10
Crosshair .............................................................. 9:3, 9:8, 9:9
Current color block ........................................................... 9:4
Current position ................................................................ 9:7
Current...