Creative 2 Owners Manual

8:19
Embroidery mode - edit
3.  Select touch function - scale, and adjust the line 
to desired length by touching and dragging on 
screen or using the arrows in the wheel.
  Touch the keypad and enter desired number of 
buttonholes. Touch Select side positioning and 
select the fourth option in the pop-up to stitch 
out the buttonholes vertically.
4.  Close Shape Creator and toggle to Embroidery 
stitch-out to embroider the buttonholes. 

8:20
328
A
BCDE
Embroidery mode - edit
(PEURLGHU\VWLWFKHGLWRU
Sequences and stitches can be adjusted in 
Embroidery stitch editor. You can also adjust 
your own created sequence or stitch, loaded to 
Embroidery edit (see chapter 5 and 6).
Note: When a stitch or a sequence is loaded into 
Embroidery edit, tie-offs are automatically inserted at 
the beginning and at the end. The tie-offs are only visible 
when you open the stitch or sequence in sequencing.
You can activate the grid in Embroidery...

8:21
30
Embroidery mode - edit
When mirroring (B), the stitch will be mirrored 
within its own area. It will not affect the position of 
the stitch like when mirroring is used in Embroidery 
edit.
You can also use the touch functions to make 
adjustments. The selected stitch will be affected as if 
it was a design.
Note: If you make adjustments to a sequence or stitch in 
Embroidery stitch editor, you can still use sequencing or 
Stitch Creator
™ feature to modify it.
When returning to Embroidery edit,...

8:22
A
Embroidery mode - edit
4.  Deselect the sequence by touching outside 
the design on the screen, or step by using the 
arrows.
5.  Open sequencing once again. Select stitch 
number 4.1.2.
6.  Long touch the duplicate icon. In the pop-up 
that appears, enter 7 and touch OK for a total of 
eight copies. 
7.  Close sequencing to load the second sequence 
to Embroidery edit.
8.  Touch the wheel center icon when move is 
selected, to move the new sequence to the 
center of the hoop. Move 7.5mm to the...

8:23
329
A
22
1718
Embroidery mode - edit
5HVL]H
5HVL]HFDQUHGXFHDQHPEURLGHU\GHVLJQXSWRÀYH
times smaller than the original design or increase 
it up to eight times larger than the original design. 
The machine recalculates the number of stitches 
in the design so that the original stitch density 
remains.
Note: To reduce or increase the size less than 20%, use 
scale touch function.
5HVL]HDGMXVWPHQWV
Select the design you want to resize. Open the resize 
window (29). 
Adjust the design size...

8:24Embroidery mode - edit
Important resize information

important to consider the following information about 
resize. Always embroider a test sample of your resized 
design before embroidering on a project.
•  Resize is always proportional. If you reduce 
a design 30%, it will be 30% smaller in both 
length and width. If the design has a lot of 
details some of it may be lost or distorted, and/
or it can be very dense. Some designs should 
not be reduced more than 25% if they have too 
many details.
•...

8:25
(PEURLGHU\WH[WHGLWRU
7RRSHQHPEURLGHU\WH[WHGLWRU
Embroidery text editor opens automatically when 
you select an embroidery font in the selection menu.
You can also open embroidery text editor by 
adjusting an existing text already in Embroidery 
edit. Just select the text and touch the sequencing 
icon (30) on the option bar. 
Note: If the text is created of stitch fonts, sequencing will 
be opened instead of embroidery text editor.
7RXVHHPEURLGHU\WH[WHGLWRU
Use the stylus and touch...

8:26
G
E
Embroidery mode - edit
&KDQJHIRQW
You can change the font and size of the text by 
touching the change font icon (E). The change font 
pop-up will show all available embroidery fonts. 
You can select different sizes for each font.
When changing the font, all inserted letters in the 
embroidery font editor window will change to the 
new font.
Load a font from another location
To load a font from personal fonts or an external 
device, touch the load font icon (G) at the bottom in 
the change font...

8:27
Embroidery mode - edit
(PEURLGHU\HGLWpop-ups
HOHWHVHOHFWHGGHVLJQV

8:28
7KHUHPLJKWQRWEHHQRXJKGLVNVSDFHWRVDYH
current state
This pop-up appears when going to Embroidery 
stitch-out and the available memory in the machine 
is low. Because of low memory you might not be 
able to save current state while embroidering. To 
clear some memory before starting to embroider, 

to Embroidery Edit and use Files & Folders to delete 
ÀOHV
(PEURLGHU\FRPELQDWLRQLVWRRFRPSOH[
This pop-up appears for one of the following 
reasons:
•  The design combination contains too many...