Creative 2 Owners Manual

6:5
Stitch Creator™ feature
789
0LUURULQJVLGHWRVLGH
The selected stitch point(s) will be mirrored 
horizontally.
0LUURULQJHQGWRHQG
The selected stitch points will be mirrored 
vertically.
Note: Only enabled if more than one stitch point is 
selected.
7ULSOHVWLWFK
Touch the triple stitch icon and the selected 
stitch(es) will be tripled. 
Note: Only enabled if more than one stitch point is 
selected.7. Mirroring side to side
8. Mirroring end to end
9. Triple stitch 

6:6Stitch Creator™ feature
15
14
13
16
16
18
17
17
Touch functions
Use your stylus to make changes directly on screen 

pan and move depending on which touch function is 
activated. You can also use the arrows in the wheel to 
make minor adjustments.
0RYH
You can move the selected stitch or stitch points using 
your stylus on the screen or touch the arrows in the 
wheel (15).
3DQ
You can either pan using your stylus on the screen or 
touch the arrows in the wheel (15).
Note: You can not pan...

6:7
Stitch Creator™ feature
abcA
A
/RDGLQJDQGVHZLQJDVWLWFK
To sew the created stitch touch OK (18) in the top 
right corner of the screen. The stitch will be loaded 
to the mode that was active when entering Stitch 
Creator
™ feature; sewing mode or Embroidery edit.
6HZLQJPRGH
If sewing mode is active when closing Stitch 
Creator
™ feature, your stitch will be loaded to 
sewing mode and is ready to be sewn. 
If selecting another stitch in sewing mode and then 
re-opening Stitch Creator
™ feature,...

6:8Stitch Creator™ feature
C
(PEURLGHU\PRGH
In embroidery mode the stitch is saved as a design. 
Touch save (C) and select Personal designs, 
3HUVRQDOÀOHVRUHYLFHV6HHSDJHIRUPRUH
information.
Important Stitch Creator™ feature 
information
To  u s e  Stitch Creator™IHDWXUHLQHLWKHUVHZLQJ
PRGHRUHPEURLGHU\PRGH
Stitch Creator
™ feature can be used in either sewing 
mode or embroidery mode. A stitch created when 
sewing mode is active will not be available when 
opening Stitch Creator
™...

Embroidery preparations 

7:2
A
B
BF
D
C
C
G
H
J
K
L
M
I
E
Embroidery preparations
(PEURLGHU\XQLWoverview
(type BE20)
A  Embroidery unit release button
B  Level adjusting feet
C  Embroidery unit accessory tray 
D  Embroidery unit socket
E  Embroidery hoop connection assembly
F Embroidery arm
Note: A smaller embroidery unit, 260x200mm, is 
available to purchase at your local authorized PFAFF
® 
dealer.
(PEURLGHU\XQLWDFFHVVRU\WUD\
Use the tray in the embroidery unit to store 
accessories used for embroidering....

7:3
Embroidery preparations
Built-in GHVLJQV
Over 360 designs are included in the memory in 
your machine. 
creative sensation™ pro II 
(PEURLGHU\FROOHFWLRQ
Page through the creative sensation™ pro II 
Embroidery collection for designs and fonts. 
The design number, stitch count (number of stitches 
in the design) and the design size are displayed next 
to each design. The suggested thread colors for each 
color number are shown.
Connect the HPEURLGHU\XQLW
There is a covered socket behind the free-arm,...

7:4
A
A
D
C
B
1
2
3
4
E
C
Embroidery preparations
Remove the HPEURLGHU\XQLW
1.  To store the embroidery unit in the embroidery 
case, move the embroidery arm to park position 
by selecting park position on the screen in either 
Embroidery edit or Embroidery stitch-out. 
2.  Press the button at the left, underneath the 
embroidery unit (A) and slide the unit to the left 
to remove it. 
3.  The cover of the socket closes automatically.
4.  Store the embroidery unit in the original 
packing material, place...

7:5
A
B
Embroidery preparations
To hoop the fabric
For the best embroidery results, place a layer 
of stabilizer beneath the fabric. When hooping 
stabilizer and fabric make sure that they are smooth 
and securely hooped.
1.  Open the quick release (A) on the outer hoop. 
Remove the inner hoop. Place the outer hoop on 
DÀUPÁDWVXUIDFHZLWKWKHVFUHZRQWKHORZHU
right. There is a small arrow in the center of the 
lower edge of the hoop which will line up with 
a small arrow on the inner hoop.
2....

7:6
A
B
Embroidery preparations
*HWWLQJVWDUWHGHPEURLGHULQJ
1.  After attaching the embroidery unit and 
embroidery foot, insert a bobbin with 
lightweight bobbin thread.
Note: Make sure that the IDT
™ system is disengaged.
2.  To select a design, open selection menu and 
touch the design menu icon (A). Locate desired 
design and touch it once to load to Embroidery 
edit.
3.  The machine automatically switches to 
Embroidery edit. The design is placed in the 
center of the hoop. 
4.  Hoop a piece of...